Hello, We just bought a Schweiss hydraulic 14x20' door. The door is great, but now we realize that we should have also bought the remote system with it, can you please send us a quote on a remote control option. I am wondering if you could give me a quote for the kit and how much it would cost to send it to Alberta, Canada. Thanks.
Current hanger has a three garage door type setup with fold-out wings and center supports that fold up and in. I would like to retrofit it with a single piece hydraulic door..
I have one Schweiss one-piece hydraulic door installed in my hangar. I have lost my door remote control and I need another one. I can send you a picture of this remote so you can send me a replacement. Please let me know if you can do this and how much it will be. Best Regards, Mitch
I own one Schweiss lift-strap bi-fold door with a remote control and would like to inquire about purchasing an extra remote for the hangar door. Do you sell these? Thank you, Sam
I need a remote for my hydraulic garage door. I have the remote receiver but the last owner lost the transmitter. Alternately, can I program the button in my car to open and close the garage door?
Have a beautiful 45 ft hydraulic door on my hangar. Remote works well now that I have replaced the battery. I'm in need of an additional remote. Can you tell me how to proceed and what price for one remote control? Thank you. Gerard
Hello, I recently installed my Schweiss hydraulic door and am now interested in information and parts to put kinetic energy radio door controls on the door. I plan on doing this from my phone if I can get a strong enough radio. This part I can provide. As of right now I just have the push buttons that I have to hold continuously to open and close the door. I would like to make this a momentary button operation when inside the garage. I realize I need some extra hardware for this. I see from the accessories page Schweiss offers photo-eyes and some switches. I would assume I need open limit switch and a closed limit switch as well as the photo eye to make this perform safely. I would also like to add a flashing light as well to warn people while it is opening. Does Schweiss also recommend the installation of a Safety relay for these controls? Could you please provide a parts list and cost for these accessories please. Thank you, Brian
When I called and ordered the new remote opening system for my hydraulic door, I was surprised you could get it to me so soon. It's now up and running and sure makes a big difference? Thank you
I have misplaced one of my two remote control pendants. Can you please quote me for a replacement? It is for one of your large hydraulic hangar doors. Thank you in advance. Reuben in OR.
We have an aircraft hangar with a 54' x 14' Schweiss hydraulic door. Wish I had done it originally, but now I want to order a remote opener with two handhelds for it.
We need to see about getting a remote door opener for a hydraulic garage door installed at one of our customers in MO.
I'm purchasing a hangar in MI with a Schweiss hydraulic door and am looking to purchase some additional remote controls for it. The remotes I have is a Keystone 3-button (open close stop), but I don't have any other information on it, the sticker has worn off, but I have a number for the PCB inside of it, PCBGHGD032. How/where can I can additional remotes? Thanks! Bret
I have a Schweiss hydraulic door installed at my home and I was needing 2 additional remote controls for it. Please contact let me know who I need to talk to to get them ordered. Thanks
I would like to add a remote control hydraulic swing door opener for our one piece Schweiss hangar door. Thank you in advance.
I recently purchased a hangar with two installed 68' x 16' Schweiss hydraulic lift hangar doors. Is there a Schweiss rep who could assist me via telephone to install a long range remote door control.
We purchased a competitors door from an auction and are looking for a remote opener for it. Door size is 11 X 20. Needing 2 remotes. Please call to give us a quote on pricing and/or to find out if this is something you can help us with. Thanks
Hello; I received a quote for a one piece hydraulic door last year from Julie, and I am finally ready to make the purchase. I was wondering if you can pull my file and send an updated quote for this Schweiss door and we can start from there. I would like to add an additional remote to make it 3.
Need Quote 45' Wide x 17' Tall Hydraulic Door With remote control this will be new wood and steel construction so i will need spec. for framing
I need a quote for a 20' X 14' one piece hydraulic door. I will supply the exterior steel skin and the insulation for this project. I also need an option for remotes. thanks Peter Miller Sr.
Hello, We need a price on a 45'x17'-6" clear hydraulic door with remote control and delivered to Chalmers, IN. We need this quote ASAP, please. Call or email with any questions. Sincerely, Brian M.
Please email me a quote for 43 wide x 15 high hydro-powered single piece door with 2 window and remote opener. I hava a contractor to do installation. The opening will be steel tube with I beam across the top,
Building a new Shop 120'x150' 30' sidewalls, looking for a 36'x24'door, This door will be opened 1-3 times per day, the remote control option is a must. What one of your doors would you recomend bi-fold or hydro powered swinging system? We are working w/Clausen & Sons they gave me your name. Thank you
asap, 2 Remotes, Please price options separatelly, For resale, any questions please call. Donald H.
Dave, RECEIVED THE REMOTE OPENER YESTERDAY AND INSTALLED IT. iT WORKS JUST FINE! I WANT TO THANK YOU AGAIN AND LET YOU KNOW THE CHECK FOR MAILING IS ON THE WAY! THANK YOU AGAIN, REESE
I am needing a quote on 2 hydro power doors. Both are 24'w x 16' tall in the sidewall an EPS 6" panel wall. I need insulation and interior sheathing options. In the quote please add electric photo eye sensors and a remote opener. Thanks
We are considering a Schweiss hanger or bifold, installed with glass on a large custom residence. The opening sizes are approx. 2 @ 28ft and 1 @ 55ft with a man door. All three doors would fit in a 9 ft high plate height and be power operated for garage use with remote controllers. Please send approx cost and availability with shipment to California. Do you have a dealer in Southern California?
I would like a quote on a 46' X 12' Hydraulic Door with weather strip kit and remotes, new steel construction building (end wall). No windows, no walk-thru door. Thanks
need price on replacement hyrdraulic door on a quonset, door opening 24 feet wide 14 feet high provide price with and without installation.
Need a bid on 2 schweiss hydraulic swing doors. each door to have a subframe for a 3070 door. door by others. outside panel is 4 inch insulated panel, it weighs about 2.5 # per sqft. inside sheeted with 7/8 corrigated. they would like 3 remotes for each door along with a 3 positon swith
Adding on to an existing building with a 30' 9" width and 15' heigth. Can use either a bifold or hydraulic, but want to retain opening dimensions. would want remote control and if possible to be able install a walk through door. Thanks
Can I get another opener remote control for my Schweiss hanger door? I would like to keep a remote in both our vehicles, but only have 1 remote.
I am considering intalling a 16' X 16' hydraulic door and need a quote to see if it is in my price range. It would be nice to have it insulated with the remote.
We have one of your hydraulic doors purchased in 2006 with a 3 button remote. It has 8 positions switches to set the security code and we would like to order another remote for our system. Delivered to the address above.
I purchased a Schweiss door about 3 years ago. When I open and close it I must hold the up or down switch continuously or the door's movement stops. I figured that this was normal - sort of like a dead man switch. The other day a friend that also has a Schweiss bifold door said that he didn't have to hold the switches in, that the door closes or opens until it reaches the associated limit switch. Can you clarify this?
Figure four 4'x5' window rough in's, evenly spaced through the center of the hydraulic door with two remote openers.
Hello, Would you please provide a price quote on a hydraulic door, with the remote feature, as well as custom-cut corners? We are looking at a 45'x10' clear-span opening. New building construction. Delievered to Cedar Park, TX. (Our side-column type is not yet determined) Thank you very much.
I recently purchased a hangar with one of your hydraulic doors installed. I would like to find out if some updates are possible on the door. The updates that I was considering were the remote controls. If these can be done to this particular door what would the parts cost?