Bifold Doors
Why Lift Straps
Hydraulic vs. Bifold
Strap Conversion
Stories
Must See Photos
New All Strap Bifold Door
Why One-Piece Hydraulic Doors
Retrofit
Strap Conversion Kits
Farm Stories &
Photos
New Strap Latches
Hydraulic Hinge
On Steroids
Stand-Alone Doors
Schweiss Designer Doors
1
Please send a quote for a 35 foot by 16 foot bifold door. To be mounted on a wood building in British Columbia.
2
Hi there, I am interested in getting a rough quote for a horizontally bifolding garage door. Approximate height of rough opening is 6'-6 7/8" and approximate width is 8'-0 5/8". The door is at the basement/street level and the garage door opening was poured as part of the original foundation formwork (1929), vertical edges are plumb and the top lintel is level. Some wiggle room for installation should be accounted for nonetheless. The door is to be insulated with an R value of ideally R14 although R12 is acceptable. It will need to be finished with a metal flat skin or corrugated metal finish to match Vicwest colour "Cambridge White (SMP #56161)" or "Vicwest colour Regent Grey (SMP #56082)". Alternatively, would it be possible to leave the door unfinished so that a piece of my wall cladding could be inserted on the two leaves for a fully seamless installation? The method of operation should be driven by cost-efficiency and a door use of approximately 2 or 3 times day. The client is not opposed to a manually operated door with a more rudimentary chain drive located on the inside if possible. If the door must be motorized, please consider the most economical set of options in your quote. The quote should include shipping, tariffs and tax costs but should not include installation. Allow for a delivery to British Columbia, Canada.
3
Looking for a quote on a bifold door. 60'x18' in British Columbia. Please provide quotes for what options you have available for a hangar door this size
4
Hello, we are putting up a new building at our fabrication facility in British Columbia and are looking to get a 50' wide x 20' tall bifold door. The columns and headers will be part of the building already, it doesn't need to be insulated. Please feel free to call or email for additional requirements.
5
Hi I'm interested in an 8'x8' bi-folding garage door in British Columbia, Canada. I'm not sure how customizable these doors are or how much something like this costs. Any information you can provide would be greatly appreciated! Feel free to reply by email or give me a ring! My cell will be the best number to contact me at. Thanks ahead for your time!
6
Hi, We have several schweiss doors and I'm looking for a new service tech to do annual inspections. Can you send me a list of dealers and techs that service the Sea to Sky region of British Columbia, Canada? email is preferred.
7
I would like to explore options for a hydraulic garage door on a residential build in British Columbia that can be cladded with siding material and be installed flush with the adjacent siding material.
8
I have a client wanting to build a hanger for a Cessna 182 in British Columbia? anyway wants the door to be 42'-0" wide by 14'-0" or 16'-0" in height bi fold doors opening vertical any information or help in regards to this door would be appreciated. First hanger i have attempted