We are building a 48'x80' steel building and are putting doors on the ends of the building. Not sure yet how big but am considering 30' or 40' hydraulic doors. Just need some pricing and maybe some ideas. Thanks.
I need a quote on a 32'x14' door going to an Air Evac Base in Tennessee. I would like a one-piece hydraulic door installed in a steel building.
New Construction, steel building will be 32' x 32' x 12' high. Customer wants a hydraulic door on the end wall (centered). Would like to get as much headroom as possible out of a hydraulic door. Please adjust door height accordingly to accommodate headroom. Header will be built into truss (4/12 pitch). Thank you, Kris
I am looking for pricing information. I have a potential AL customer needing a 30x15 (15' clear). Building is steel 50x100x18 and door is located in endwall. Hydraulic or strap(electric)options. Prospect requested electric lift but, hydraulic door may be what he really needs. Thank you.
Looking for price quote and any structural requirments needed for a new "stick built" hanger. I'm in initial design stages hoping to get design to drafters and signed by engineer soon. Looking at late summer build or early spring if we run out of time (don't want to build in winter). This is a 60x45 with 17-18 foot internal wall height. hanger for personal use... i live on a private air park. Your doors are the best ! Johnny Butsworth
I am bidding new steel fertilizer storage building doors. The first opening needs a one piece door 100' x 30' 6" The second door opening is 30' 6" x 60'. Can you custom build Schweiss one piece hydraulic storage building doors for this size?
Need prices on a 46X16 and 46x14 doors bifold (liftstraps/autolatches), and hydraulic (Red Power pumps), and specs for the steel building company so they can get a building price for me thanks.
I work for a steel building company, and I am quoting a building for a guy who originally wanted bi-fold doors, but now has decided to go with the hydraulic one-piece door because of your new Red Power hydraulic unit (He wants power, fast lift/close). I'm wondering how much difference in design of the building this will be. Please advise. He will have a 50x20 in one end and 32x20 in the other. Thanks,
I would like to open up must of the wall on a new steel structure, Just not quite sure how big I can make the door for height and width. Building is 60 X80 with no end walls.
We have a 10'x10' opening in the side wall of a new steel building, for which we are considering either a bifold or a hydraulic type overhead door. What would be the ROM pricing for a steel (clad) door?
Please quote a 18 ft height x 30 ft wide hydraulic door. We are constructing building and also need info on steel. Will be placed in 48 ft endwall made up of I-beam (expandable endwall). Please quote shipping. Thanks
To whomever does qoutes. I work at a Lumberyard here in Melrose and have a customer requesting a bid for a 36' wide by approx. 16' tall hydraulic door for a steel structure. It would be non insulated. Just enquiring a price qoute and perhaps some infor about it. Feel Free to call or email me at my office anytime, (the sooner the better) Thanks
I Just finished constructing a new steel building and need a door. I cant decide between a Bi-fold or hydraulic. Could I get prices on both maybe that will make up my mind. The doorway is 26 ft wide by 14 ft high with with 10 inch steel channel for door frame. Thank you.
my cold storage steel building is up. was wanting a price on a hydro. rough opening is 188 inches tall by 31ft.11 and 3/4 inches wide
Need a quote on a hydraulic My steel shed is 56 by 56 by 16 high to the eave. It is open on one side. I built it originally to store feed.
quote for a hydraulic, client with a 30'w by 40'l building 18'h @ eave looking to put a 28 x 15 door in one end. building is existing newer steel construction.
I am looking for a quote and install dimensions on a 40'x18' schweiss one piece hyd. door. The door is being installed on a steel structure. Please reply by e-mail with info and availability. Thank You very much.
I just put a new steel building up and I am subing out the 24x14 hydraulic swing door. Concreat is poured and the weather is turning colder.
I would like quotes for both style of Schweiss doors (bi-fold and hydraulic) for a 62' x 15' door to be used on a new construction steel building (airplane hangar & ag storage). Building will be either a Behlen or Sentinel. Thanks
I need a quote on two hydraulic doors, 47w x 12hi to fit a Nucor building at the Airport in Harlingen, Texas. (KHRL)This will be new construction for two 50 x 50 x 16 hangers. The doors must be wind rated for 130 MPH and include a certification to that rating. I spoke to your outside man at Oshkosh, and he was very helpful. He told me that your hydraulic doors can handle that much strain. Thanks, Benjamin
WOULD LIKE A PRICE ON 40 X 14 CLEAR OPENING BI-FOLD AND HYDRAULIC SWINGING DOOR SYSYTEM FOR MY STEEL SHOP HANGER, NOT BUILT YET, CONTRACTOR STILL WORKING UP BID FOR BANK. THANKYOU FOR YOUR TIME. AARON SIMPSON, WASILLA ALASKA
Looking for price and delivery time for a 55-60'X14-16' clear height, hydraulic swing door. The building is a 60'X60'X16' new steel construction, I'm not that far from your manufacturing plant, what would you charge for delivery. I would appreciate any input I can get.
I need a quote for a hydraulic door 40 ft in width and 18 ft high. This will be installed in a new steel building 64' x 140' x 20'. Please include freight in the quote.
I have purchased a used steel building 40X60X14. I am thinking about putting up a hangar and am wondering about a hydraulic door for it. I am open to suggestions and prices. If you have any questions please give me a call or email.
24'2"x14' to go on a side wall of a steel frame building. Would like a price quote on your hydraulic door. Would like to know how much more it would cost to have the inside truss on a 15'tall door.
I have an existing steel frame building insulated, and would like pricing including a remote opener. The building was built about 25 or 28 years ago.
I have a 16 ft wide by 14 ft high. The hydraulic door i need is on a steel building end. Could you give me a few options of product and price.
We are erecting a 44'X60' building with 14' sidewalls. The door frame has not been built but we would like to put in the largest hydraulic door we can.
I would like to replace my machine shed doors with a hydralic or byfold door. My opening is 13.5 x 24 feet. I would like to raise the door to 15 feet . There is enough room but the header would have to be raised. My building is all steel. Would you be able to do this? What would it cost?
Am considering converting existing rolling door to hydraulic overhead. Door is 24 ft wide, 14 ft high and weights about 1,000 lbs. It covers a full interior bay of a building and will attach to the main frames. As I am in the fabrication business, I can easily provide attachment brackets and any steel fabrications and will self install. Need budget cost and details of what you would provide vs what I supply in order to keep cost to a minimum (no use in sending ordinary iron across the country). Also electrical requirements for the pump.
Looking at building a 70x150x18ft tall steel building with the steel being on 25ft centers on the side walls. I was looking at doing 6 side wall hydraulic doors at 25ft or maybe even 3 doors at 50 ft.
Need info and pricing for a series of hydraulic doors on residential shop. Steel building with I-beams for headers and columns at openings. 1@20x14, 1@13x10, 4@10x10 Would like remote operation on 13x10.
building shell is in procees now, hydraulic door opening is not set in stone yet,so the door posts can be done in any way to maintain cost effectiveness.I would like a quote as soon as possible so that a decision can be made soon on a door thank you!
My building is a 60' x 80' steel building. Construction is complete except for the installation of the main hydraulic door. The doorway is framed with rectangular channel for each side and for the header. Please quote the door prices seperately. Also quote available options based on the door size.
We are a steel building dealer in our area, and we are getting more and more farmers wanting your style of hydraulic doors. Is there a dealer in our area? Or do we buy it and install it ourselves? The best way to contact me is by e-mail, since I am not always in the office. Thanks,
Received your design info.thanks. If you have a hydraulic door on both sides of an I-beam column,what flange width do you require?
would like to install a door in the sidewall of an older steel building. 13' sidewall building is 30 years old. only have about 12" of room from top of opening to the bottom of the gutters [13' 8" from floor to bottom of gutters] Thinking about a hydraulic door.