Power will be off 9-9:30 today
Schweiss Doors logo

CONTACT US

800-746-8273

Let's Talk
Doors

HYDRAULIC DOORS
BIFOLD DOORS
DESIGNER DOORS:
PROJECTS

Home

4-5 Week Lead Time!
SCHWEISS DESIGNER DOORS

CONTACT US

Hydraulic Hinge
On Steroids

Stand-Alone Doors

Locations

What People Are Asking?

26: SCHWEISS DOORS EASY INSTALL

1

Good afternoon. i need to have schweiss's recommendations on labor hours to install a 50'x10' one piece hydraulic door.

2

I am the superintendent for a construction company. We are installing one of your 90 foot hydraulic doors in Bethany Oklahoma. I have the job number. I foolishly gave all their installation manuals to the fabricators and do not have a copy, is there a digital copy that you could send to me. Thank you.

3

Hi - we are a general contractor with a project that has Schweiss garage door spec'd and are looking for local, qualified suppliers and installers in the Hamptons.

4

I've been asked for pricing to install your bifold door and wonder if you had any information on helping me price it. Thank you,

5

I am building a 28 x 32 detached storage unit and looking for an estimate on a bifold door (strap) door size 20 w x 10 please - for a lake property in Pequot Lakes MN incidentally. some idea of cost- delivered. can any contractor install or does this require special installers? If so who would you recommend for Pequot area ? turn time to create it delivery options any special building prep considerations - assume mounted externally. std electrical power or higher voltage required. is there a manual crank back up options should power fail Please be so kind as the email the responses and if moving forward I will have the builder we plan to use contact you - we are still in the design stage. thanks

6

I am looking for an installer. I would like to get some ideas for my building before purchasing a door and want to know what installers you have in this area (48604) for the installation of your bifold doors. Thanks.

7

I need a price on an insulated 30' wide bifold door. This will be on an 18' sidewall post frame building and need to be installed. Thank you.

8

I would like an installed estimate if you install for a 40x15, and price estimate for the hydraulic door and the bifold vertical lift door. Thanks.

9

Good morning, I am very interested in schweiss doors and learning the installation prosses of these types of doors, any help would be much appreciated, thank you.

10

I am looking for an installer for a schweiss hangar door that I purchased and the company that I had lined up for installing the hangar door was too far away. Let me know if you can assist. Thank You, JW

11

Hello, I ordered the new lift strap conversion and when I was installing them I had a couple questions. I referenced your website and called your office personnel. Really great team and information provided. I was overthinking the process- really easy install. Thanks for all your help.

12

My contractor in FL usually only installs Hi-Fold doors (I think that he makes money on the sale) but he will sell/install a Schweiss door because he says they are better hydraulic doors and easier to install. I'd like a Schweiss door if the price is reasonable.

13

I have an old brick house that I am remodeling. There is an opening in my foundation that is to be my new basement door. There is a sloping ramp to the door, so I need the door to open to the inside. The other thing id like to know is can you mount a Schweiss hydraulic door that is roughly 5'6"x6' on its side? This way, my basement door opens to the interior basement wall, not losing headroom or side room, and allowing me to not have a track to drive my atvs and lawn mower in and out over.

14

Am interested in pricing a 34'or 36' wide x 16' tall hydraulic door for a customer of ours. We purchased a 44'x18' Bi-fold door through Schweiss last year. And, the person is a very Happy Customer. Your delivery and set up crew were very efficient and compatible.

15

Please quote 60' x 24' easy to install Schweiss hydraulic one piece door with a pass door and 4- 3'x3' windows. Want your best hydraulic door pump and cylinders with spherical bearings and remote door opener.

16

Quote on the type of rail dump door with respect to its size. Hydraulic or bifold with lift straps. I can pick up at Schweiss Door factory and do the install myself. Schweiss doors are easy to install.

17

How much would a 12 ft wide x 12 ft high Schweiss bifold or hydraulic one piece residential  door cost? Can I get entrance door in that small of a door. Are both door styles easy to install? 

18

I am working pricing a new custom hangar home door for a client and need quote on a 36' wide x 12' tall Schweiss bifold liftstrap/autolatch hanger door. Do you install hangar home doors in Oregon? I hear Schweiss doors are easy to install?

19

I am interested in the price for a quote on a 20 foot wide bi-fold strap door that is 14 foot high. Usuable space. Would the door frame have to be taller than the 14 foot to get a full 14 foot of usuable space? Is the price installed or can a contractor purchase the door and install it. I have installed a lot of overhead doors but no bi-fold doors --yet! I hear tell that Schweiss Doors are easy to install.       

20

I am building a new garage and would love to use one of your quality bifold liftstrap doors. It will have a 16 foot wide 8 foot tall opening. The plan at the moment is a steel reinforced concrete filled block wall up five feet and a 3 foot 2x6 wood framed wall on top of the masonry. Is this building design enough for your door using the lift straps ? Or shoud I incorporate more structure around the opening to carry stresses when the door is fully open, I imagine there will be some stress on the wood structure. Should I design a heavy steel door frame for example and design that into my new construction? Or carry my masonry wall up to my header? Also do you sell plans for your doors and sell the hardware so a customer can fabricate there own door and save on some shipping? Can I get a quote for a door shipped to the 92024 area code. Thank you for you time Jordan

21

We are undecided whether we are going with wood or steel shop. We are in the planning process. Do you have any information which one would be an advantage over the other? I'm particularly concerned if I need a freestanding header on a wood structure. Love you bifold liftstrap doors.   Thank you. Larry

22

We are bidding on a project that you have provided a quote for an 60 foot by 15 foot Bifold door, your bid # 12512HE. We inquired about door erection and you told an estimator here that we could install it. Can you share the crew size you would use and the length of time you would estimate for your crew to install. I feel we can then adjust this time to come up with a resonable time to put in our quote for the building and door to the owner. Thanks 

23

Please quote a 40x16 clear bifold liftstrap door and Red Power hydraulic door installed. Please also include option for free standing header installed. Please also FAX design information for both a bifold and hydraulic door for metal building manufacturer. Thanks

24

We are a metal building manufacturer. I am quoting a small building for gentleman in Gold Hill, NC 28071. He says that he was told by his friend that he can fit a 38' wide door in a 40' wide building. In my experience, I need at least 30" on each side.

25

A local construction company called yesterday to ask if my son and I would hang 2 Schweiss doors for him. One is in Buffalo (28wide X 23 high strap  lift with auto locks) and one in Casper (62 wide X 16 high strap lift with manual locks). I don't have any kind of a pricing guide because we do not keep track of the time it takes on our own jobs as it is just part of the overall labor cost. Can you tell me what you would charge to hang these doors if they were about 100 miles from your shop? Also, when will they ship, or have they already been sent? FYI....It looks like I finally have enough buyers to build the 6 unit hangar at Longmont.

26

Hello, I have a bifold liftstrap & autolatch door (hanger) and would like an installation guide site or papers or manual. I know this sounds weird but I have built about everything to do with commercial and residential but have not put a hanger door together and I don%u2019t want to screw your door up. Thanks for your time my client will appreciate your door when it is completed.

27

I am representing a home seller who had purchased one of your doors, and I've been asked about the specifications on the door and what the maximum opening could be. It is currently set at 10 ft., and looks like there is potential for more of an opening, looking for what the maximum opening could be. The door is 50 wide x 14 high with the strap system. The original purchaser lives in Anchor Point, Alaska. If I can provide any additional information please let me know. Thanks for your help.

28

Do you do any installation of the framework or just deliver it to the job-site? We will be replacing an existing Schweiss bi-fold that got damaged in a severe wind storm providing we get the bid. Thanks Carl

29

Wondering where the closest Schweiss Doors dealer/installer is and if they will do installs in NW Minnesota. Initially we were going to install the two bifold doors, but are getting too busy, can you guys work it into your schedule?

30

Getting bids on a new shop. Looking at your doors 40 ft wide. One quoted your door (he is high on total building)! The other contractor subs out his doors and doesn't know anyone that puts in your door. Any independant door people install your product in my area of New Mexico?

31

I am looking for a local installer operating in New York metropolitine area. I decided I don't have time to install the Schweiss bifold door myself afterall. Who can you recommend?

32

This is Door number two of two bifold doors. Please apply the building construction type of this door to the previous quote request. This will be all new construction. The first door went in like a breeze, really like it. Your installers do a great job and don't waste a second of time.

33

We just purchased a 72' bi-fold door which was just shipped and is scheduled to be installed on Monday. We are supposed to provide the lift equipment, and I need to know specifically what kind of lift unit is required. PLEASE CONTACT ME ASAP AS I NEED TO LINE IT UP TODAY. Thank you.

34

Hi I purchased a bifold door from you last fall and am currently in China. The door is in Kodiak Alaska. I will be installing it soon and even though the instructions came with it I do not have a way to access them. Can you email me installation instructions? I am not sure if the hinges get welded or bolted to the hangar structure. Also where is the placement of the motor on the door? Is it left side from inside the building looking at the door? What size motor and amperage so I can size the wire correctly. It is probably 100 feet or less from breaker box to door going up the hangar wall over and to the motor as the box is on the right hand side facing door from inside the hangar. Thanks so much Joel

35

I am looking for Arizona Installers of your horizontal bi-folding hangar doors for the Gila River Indian Community new Vee Quiva Casino project located in Laveen, AZ, just South of Phoenix. Also requesting rough order of magnitude budget pricing to furnish and install one (1) 30' long x 24' high door. Any help you can give would be greatly appreciated. Thank you. - Marvin M.

36

I have two openings that I am planning to put doors in. One is 20'-0" X 20'-0" and the other is 16'-0" X 16'-0". I can do this in several different ways. We are a steel fabricator so we can build the bifold  doors and buy all the electrical and mechanical parts from you as well as purchasing sealed drawings from you if this is possible. If this will not work please price the doors without outside skin. Thank you Steve N. VP Operations 

37

A got a quote last week and ordered your Schweiss Bifold door for my hangar and would like the names of installers in the Denver or Colorado Springs area. Thanks

38

We have a steel building and would like to put on a bigger Schweiss bi-folding or hydralic door. Can your crews do some modification at install? We'd like to make it a couple feet taller. Randy

39

I am very interested in a Schweiss bifold door but want somebody to come out look what I have and give me a installed price.I want to know how much height I will lose! Iwant somebody to physically look at it and tell me for SURE what my height will be.Can you do that for me.

40

HI. WE MET YOU DURING EAA 2011 AND WE WOULD BE INTERESTED TO INSTALLING SCHWEISS BIFOLD DOORS.

41

Can the installers please call me today on my cell when the delivery of our Schweiss bi-fold door is here. I am working off of the airport and need to know when to be there. I have the check with me I hope you had a great Christmas. I do not have my computer with me. Thanks

42

need another estimate, change in plans going with the Schweiss bi-fold system, I like the look of the bi-fold and need full 18 ft height clearance and 40 ft wide. add delivery and installation and some local installers who you would recommend.

43

i am looking for a price on a 38' by 16' Schweiss by-fold door. i need it installed do you install or do i have to find someone, if so, please refer installers. i am not currently sure what the sheeting on the out side of the door is going to be. please email me the price as soone as possible. thank you for your time.

44

We have a Project of an Hangar Aircraft Building that we'll start to build in January 2012. We want help to install overhead bifold doors and we are looking for installers near to Chihuahua City, it can be in el Paso Tx. We need to know the cost of an automatic bifold doors system the sizes are: width 23.80m - 78.08feet, Height 5.56m - 18.25feet If you need more information please let me know Thanks for your attention Regards, Jesus

45

I contacted you about 2 months ago about a bi-fold door and lost your return email. The exact dimensions of our door are 15ft 2in high by 23ft 6in wide. There is plenty of room above the opening for a header. We would want a bifold door with electric opener. How would the door be shipped? Does it require assembly? Can we install it ourselves or does it require professional installation? Is the door insulated? Thanks.

46

Hello, I need a price for a scissor door (bifold) opening 40 'x 12', operator 220vlt Delivered to Dolbout, Quebec. Can you also recommend a local installer? Thank you

47

Hi, We are a retail distributer of doors on the internet and wholesale in Florida. Recently we are getting more inquiries for Schweiss bifold, hanger and specialty doors. We would like to partner with your company so that we can quote or pass on these leads. Please contact me to discuss. 

48

Price quote for 40x10 bifold w/ all necessary hardware. I looking for installers and could you recommend someone who is in my area. Feel free to call if any questions.Thanks

49

My company is providing an erection quote for a new hangar in Byron, California. The steel building features (7) Schweiss doors ranging in sizes from 42'-6" x 18'-6" to 65'-6" x 18'-6". I would greatly appreciate any information on how many man hours required to assemble a door this size. Or perhaps a quote on your factory installers installing the doors. Thank you 

50

OUR COMPANY DOES QUITE A BIT OF SECTIONAL DOOR SALES AND INSTALLATION WORK FOR FARMS AND RANCHES IN OUR AREA. I AM CURIOUS AS TO KNOW WHAT IS REQUIRED TO BECOME A DEALER, AND WHAT TRAINING IS NEEDED TO PROPERLY AND SAFELY INSTALL YOUR PRODUCTS. I AM INTERESTED IN THE B1-FOLD DOORS FOR INSTALLATION ON BARREL ROOF "QUONSET" TYPE BUILDINGS, AND SLANT SIDE, FLAT ROOF BUILDINGS - THE KIND MOST USED IN FARM APPLICATIONS.

51

Need a quote on a 28 wide by 19 high folding door and shipped to southern colo with auto latches and auto up and down(momentary switches). Do you know of any good installers in the area?

52

I have an open air steel framed building with concrete block walls on three sides that is used as a pavilion...approximately 20,000 sq.ft. in size. In order to use it year round, am exploring closing in the last side(so we can A/C the building) but want to have the ability to open it up on various occassions. This side is 200 feet long. Do you have any bifold door contractors/installers you have worked with located in Florida? If so, I am located about 70 miles north of both Tampa & Orlando. Thanks.

53

Can you please furnish the name of your representative/installer in Houston? I have a custom application that your product would be perfect for. The door is already made - it just needs the lifting apparatus. I look forward to hearing back soon.

54

I need to maintain my Schweiss hangar door. I am located on the California, Can you send contact telephone numbers or E mail for your local Door Service Rep to keep my door running like it is. Your prompt reply appreciated

55

Hello, the Schweiss Bi-fold door has been spec'd in a project we are currently bidding. We are a GC in NY. I am looking for a sub-contractor to supply and install your bi-fold door. Do you have names of anyone who can provide this service? Thank you. Laureen

56

i would like to get a quote for a bifold door with a walk threw door in it 20ft wide by 14 tall with the strap lift and remote opener. I have an installer that will be putting it a steel pre-engineered ag structure. He has installed your doors before and is surprised at how heavy duty they are.

57

Outfitting an new shed and I need a quote on an insulated bi-fold strap door -- 16 feet tall and 32 feet wide. Also, can you recommend someone who can install the schweiss door in Fonda, IA?

58

I am an overhead dealer that I would like to start installing Schweiss hi-fold doors.I provide doors for many pole building businesses.Please let me know if I can buy from you. Thanks Kolby S

59

The bifold door latch on the left side has somehow become damaged (the winds can get pretty brutal around here). I am looking for a representative in the area to take a look at it and repair it and readjust the door if need be. In the West Palm Beach, Florida region. Thanks for any help you can offer.

60

I am looking to build a one plane hangar in Troy Airpark outside of Troy, Missouri. I expect to install a 40' X 10' bi-fold door with auto-latches. Do you have any installations in that area where I could speak with the owners? Also, do you have installations in the Stillwater, OK area?

61

We are a General Contracting company with a client who is building a hanger. The specs for the hanger call for a 15' x 50' bi-fold door. Are there any experienced "installers" in the Central Florida area?

62

We need to have a 15' x 50' schweiss bi-fold door with lift straps and auto-latches installed in Florida. We need a competent installer, do you have a list of qualified installers.

63

We're putting together a budget price for an aircraft hanger 60' x 60' with 50' bi-fold door. Would appreciate pricing for door w/ freight to Alaska as well as your guess on installation cost. could you refer a good local installer?

64

I'd like to get a quote on a 50' wide by 20' high (20' high clearance)bi-fold door. The building will have the door frame design per your specifications. Do you do the installation? Or is there a local installer? The building is a 64 Metals design. It has laminated wood columns and steel trusses. They will provide matching sheet metal including wainscoting. At this point I believe the door frame will be wood columns with a steel H beam header. I haven't seen the drawings yet. I would like the quote to include lift straps and safety photo eyes.

65

WE WOULD LIKE A QUOTE ON A 55 FOOT BY 16 FOOT HANGER DOOR. THE LEAST COST POSSIBLE. DON'T NEED ANY EXTRAS AS AN EXISTING STRUCTURE LOCATED AT THE WOOD COUNTY AIRPORT. PLEASE PROVIDE NAMES OF PEOPLE IN OUR AREA CAPABLE OF INSTALLATION. WE ARE FORMER CUSTOMERS OF YOU AND THE LAST BIFOLD DOOR YOU SUPPLIED WAS IN AITKIN, MN AT THE AIRPORT SAME AS THIS , INSTALLED ABOUT 8 YEARS AGO AND ARE VERY PLEASED WITH SCHWISS. SINCERELY, Doug T

66

I've received a price from Schweiss on a bi-fold already. I was wondering if you would be able to provide a quote for the install or if there are any installers around me that you would recommend. I'm not sure if you do work outside of the United States.

67

I just submitted a request for a quote for a hydraulic door and see that you do provide installation. I would prefer that you quote it with installation. Thanks

68

I wanted to say thanks for the quick work in helping to get our problem solved with our bifold door. No one likes it when things get mixed up but your cooperation in coming up with a remedy took a lot of the sting out of it. You folks make a fine product that you can be proud of and I am proud to put your door on my building. Your instruction manuals and illustrations are some of the best that I have seen.But I wanted to say a special thanks for sending up Darrel. I apologize for not knowing his last name but a finer workman you could not have chosen. His hard work and attention to detail were a pleasure to watch. He always went the extra distance to get it right and took the time to make good suggestions and implement them. I think that he would have worked all day without a break if I would have let him. You can tell that he has a farm background where people know how to work. He was a gentleman and a pleasure to work with. I'm sure that you folks take good care of such a fine employee. By the way you can tell him that I got my tape measure back. Thanks. Best Regards

69

I have the quote above from your company and have a couple of questions: Are there any other authorized resellers/installers of your bi-fold doors or is your company the only company authorized to see/install the Schweiss bi-fold doors?

70

I am a Metal Roofing contractor in Tucson, Az. I have a prospective client that wants to enclose a metal building and install a hydraulic door to the entrance. [ see attached photo. ] The clear opening is 38-0 x 11-9. I am looking for your opinion and a quote for a door for this application. We are also do Installation that installs and services roll up doors all over southern Arizona. I would like to believe with a little coaching we can install this door ourselves [ maybe ! ] I have looked thru your web site. Please give me a call so we can discuss the possibilities.Thank you

71

Can I get a catalog as well as some contact information of a company that supplies and installs your Schweiss Doors products in the Cincinnati area? Thanks kevin

72

Dear Sirs,We have a list of KY installers. However, we are located a few miles from Evansville, IN. Are there any installers in the Evansville, southern Indiana, area? Is so, please send list. This is for my bifold door. Thanks, Henderson, KY

73

I have one of your doors that was installed about twenty years ago. I want to replace the cables with your new lift straps just to make sure I can make it another twenty years without any problems. The door is 42 feet wide by 13.5 feet high.

74

We're bidding a project that specs your hydraulic door in Penn Yan New York, and I'd like to know if you have local distributors/reps/installers, or would we go thru you to get a quote?

75

I have a nominally 8'x8' opening and would like to utilize an overhead folding door. Can you tell me who installs your product in my area? Thank you, Sally J.

76

i need to price out 2 bifold doors for a customer 18'8" wide by 14 foot hi need two of them or unless i go with one door 38w by 14 hi like price delivered and also break out what it would cost to install

77

I am trying to bid installation of one of your hydraulic doors. Do the panels come with holes drilled for all the hinges except the header holes? Are the panels shipped assembled, or is that done in the field? May have more questions later.

78

We are looking at building a 100x100 hanger this spring and would like to have a Schweis Bi-fold installed for an opening of 70ft wide and 20ft high. I guess I need to know where to start to find out price and dealers/installers for this area.

79

 CAN YOU PROVIDE A PRICE FOR YOUR COMPANY TO INSTALL (3) HYDRAULIC DOORS, AND ALSO A PRICE FOR TECH SUPPORT IF WE INSTALL. JOB IN  PA. PROBABLY GOES IN OCTOBER.

80

I would like to discuss size and price of your hydraulic swing door. Im planning on a summer 2010 build. 60x60. Door aprox. 44 to 46 wide by 20 high. Install, price, delivery of door?

81

I currently have a 20' wide by 14' high door. Want price for 24',30' by 14' high bi-fold door w/install.

82

looking for a 46 wide and 12 tall hydraul door. will self install need pricing and info. thanks jeff

83

Would like quote on 12x12 one piece door installed--thank you Jesse

84

Is there any way I can get another installation guide emailed to me for a bifold door we installed a few years ago. 

85

Need help installing  a 60' wide bifold door (think is 18' high). Who does the installs in my area?

86

Please quote the following hydraulic lift doors with lead time and any requirements for installation, such as headroom , ect. Thank you, Bonniel

87

Please quote 14 ft wide 12 ft high one piece insulated door. Installed with closer. I will remove sliding doors on building.

88

I'm with Southern Utah Doors in St George Utah. I am in need of some hanger doors in my area and was wondering if someone there could help me out. The sizes are 46 x 14 and 18 x 18 and 40 x 12. I have installed bi fold doors in the past but it's been a long time. Is your product difficult to install? Do you have installation instructions? Any help would be greatly appreciated. Van

89

Do you have experienced Schweiss Door expert installers that you would recommend near San Jose, in Northern California? Thanx J.

90

Would like door price alone and also an installed bifold door price. Need door installed this Summer-Fall. I need a door that will not loose any height to my opening.

91

Hi, Im looking for contractors in my area who can install your bifold doors...can you recommend someone? thanks John

92

could you install a hydraulic door in guadalajara mexico?? how much would it cost me to bring the door and have it installed??

93

We are to install a 1 piece hydraulic door for the New Jersey Department of Transportation Aero Operations. My concerns are the building we are to install the door on. The building has angle iron trusses made up of 4x4 angle iron. The trusses are 2' high on the ends up to 4' in the middle placed 64" apart on center. I am thinking that the free standing header assembly will be needed to properly support the door. I don't know if you can offer any idea as to the ability to handle the weight. As the installing contractor I will need an idea of the cost of the header assembly. The DOT is going to purchase the door. We will be supplying labor and extra material. Thank you for any information you can offer. Kelley

94

I would like to become an authorized installer of your bi-fold doors I currently have a customer who has requested a Schweiss Bi-fold door the dimensions are 16' X 7' under separate email I'm sending a photo of the model he has requested, please contact me to discuss optoins, thanks....Jeff

95

To Whom it May Concern: Would like information on cost of 2 units (delivered) to Lineville, AL (size as indicated below) Also, would like a separate figure for Installation of both doors (we can provide a forklift for installation). Need this information as quickly as possible. Thanks, Barbara D.

96

I am going to be building some hangars in Salem Oregon, the owners will be buying your doors but want me to install. Do you have installers in this area?

97

We are interested in working with your company on any installations we can help with our security systems and CCTV systems you sell with your door packages. We found your information on AOPA as I am member of AOPA.

98

I wanted to pass along my commendation of Roy W. Jr. and Sr. for their good work on hanging my door. They were professional, prompt and very nice to deal with. I would, and intend to, recommend them to anyone in southeast Texas. I appreciate your recommendation. I just wish I had known about them before I built my hangar. Alan D. New Waverly, Texas

99

Do you know of a company in the Dallas, Ft. Worth metroplex that could measure and install a Schweiss bi-fold door on an existing hangar that right now has metal sliding doors. This particular hangar has eight metal rolling doors 17' tall by 13' wide. The width is approximately 104'. We don't need a door that wide. What is the widest door that you make? Any help would be appreciated. Thanks, Mike

100

Installation: Do you have trained contractors to install your doors or would we install the door? Specification calls for a Bottom Drive with Strap lift.

101

Do you have a installer/rep in the houston area? have owner requiring 9-44' per building,1-7 buildings and I need pricing info. Also will need load requirement to include for column reactions in building design. This application will be in a 120 MPH wind load zone Thanks Bo

102

I have two questions: 1. I currently have one of your doors. I need to see if one of your installers might be in my area aometime in the near future to check it out for me. 2. I am looking at an application for one of my customers that may need four doors. They will be about 15 wide X 30=/- tall. I need for someone to contact me in the near future regarding these please. Thank you, Roman U.

103

Please can you tell me if you can make a hangar door approx 31ft wide and 7ft high (opening) and an approx idea of cost. Do you have UK installers? Many thanks Graham S.

104

Could you please Fax a list of door installers, and door service people in California, Oregon & Washington State. Thanks Robin N.

105

I am building a 40' x 40' building with 10' eave heights. I would like a price on a 35' - 37' wide door. Installed price and not installed price.

106

Ineed a price on a door 52' wide by 16' high. Also I wooould llike a price for you to install the same. Thanks John

107

Building is currently in the design stage. Rough opening is shown to be approximately 72' wide X 22' high and is 2' off center in a 100' wide X 24' high endwall with 1:12 roof pitch. Customer wants a "push button" operation with no manually operated mechanisms. Please quote installation as an alternate.

108

I am in need of a quote on a door that is 60' wide and 18' tall. If you could quote installation that would help.

109

Have 40' wide wood hanger in Mora Mn. interested on price of door installation. It's 10' high tapered roof and has sliding door at present. Would like to keep the 10' clearance. Call back in AM ok. Thanks Walt...

110

Looking to get an estimate on complete install on existing steel hangar. About 80 feet wide and 18 feet tall. I live in Utah and was wondering if you have someone local. Thanks!

111

What kind of a price range would we be in for a 16'x 30' & price a 16' x 20' bi-fold? I would like to try to put this on the budget sometime but need to know how much to propose. I would also need a quote on instulation if you provide that. Thank you.

112

We are bidding a project in Scottsdale, AZ and there is a Schweiss bi-fold hangar door specified. Please contact me as to local distributor/installers that we can have bid this project to us. Thanks

113

I purchased a hydraulic one piece door from you a few weeks back. Am having trouble finding an installer. Can you give me some suggestions? Thanks.... Andy B.

114

I would like detailed instructions of the correct installation steps for the bifold doors. I have a company wanting our company to install 3 of these doors. Before we consider taking it on I would like to review the generally recommended method of installation. You may call me on my cell(faster)if you have questions or just email me at the above. Thanks, Dan

115

I need a quote on a 60'0" (W) x 22'0" (H) Bifold Door with an electric motor. We will sheet it with metal panels that match the metal building it will be going in. Please let me know if you provide installation or if you have supervision. The job will be in Johnson City, TN. I need taxes and freight included. Please e-mail me specifications for items like weight so I can design the building properly.

116

Would you please send me via email or fax the names and numbers of your installers located in the the Metro Phoenix area? Thanks DSF

117

i would like to be an installer for your doors i have installed doors before for hangers please let me know how to do this thank you Rick O.

118

I am pricing 3 hangers in Arkansa for which I will need doors,they have requested Bi-Fold doors. I am not sure on the width of door required yet. Can you Give me an idea on sizes avaible and some base pricing. Also do you have crews that install in that area. Thanks Dave

119

We need some names for people that can install your door in Austin Texas. We have your door now and need a installer ASAP. Thanks Duke

120

We recently got a bid for 6 of your doors, and I was hoping to get some information on installing them. Can you give me some names of overhead door companies that have installed them before that are located in the Washington or Alaska area. Thanks Sara

121

RFQ 100' x 20' Hangar Door Installation Seperate Our Proposal Due: Thursday 3/6/07 Will Fax Proposal Forms - Prevailing Wage Rates and Project Specification Sincerely Thomas M. I. Oppy Construction Inc.

122

I would like a quote on the following door. Please quote with installation and send papers via fax on extra requirements for supporting the door. Thanks Much Donelle c

123

I have a contractor that is building a community of about 100 buildings that will need by fold doors. He wants a local company to install them. I need some info on what is required to install them. He's also needing a price on one unit asap. Its a 50x15.

124

I GOT A QUOTE. I NEED SOME INFO ON WHAT IS NEEDED TO INSTALL A 40X12 SCHWEISS??????I HAVE INSTALLED DOORS, BUT NOT LIKE THIS.JUST NEED TO KNOW WHAT TOOL R NEED. IF YOU CAN HELP THAT WHOULD BE GREAT.

125

Please quote with a price for labor to install the door. Also figure a separate option to insulate the door.

126

I was given a quote on Bi-Fold doors on a project that is bidding in Minden NV. I was told that you do not intall yet I see on your website that you do. Can I please get a quote on installing the the doors you quoted -Minden. Thank you

127

We are interested in your One Piece Hydraulic door for a new building we are planing on constructing in near future. We would need 5 doors approx 40'x 28'. My question is do you have any installed in the North East part of the country that we could look at? Thank you Jack C.

128

Your add says un install bifold doors ??? if so I need the installer to contact me. however dont bother sending me a first timer installer experienced only with projects that i can go see.

129

I am looking for a 40 foot door that will open to 12 feet clearance. I have an installer, unless you have one in this area.

130

I am working on a airplane hangar project I think the customer will go with pocket doors but I would like to see all of my options. Do you have crews that go around and install doors.

131

Hi I would like to get an estimate on the price of a door (owner installed) for a 40 x 12 door(clear height - I am assuming a 14' rough opening will yeild a 12 clearance under the door). I realize that the installation can vary greatly based on the drawings you have provided on this site. The quote I need is just for the door (I assume that I will provide the siding that covers the frame) and all the winch/attaching hardware needed. Thanks

132

Hello I'm inquiring as to the square foot installation price to have a 65' by 42' installed. And would the number change if there's 3 in a row T Hanger Type Please reply

133

Your company put in a similar door in June of 2002 for us. We are looking into building another hanger and would like a price on a door and a price on your men installing it like they did the last time. Thanks Tony

134

Could you please send or fax us information on your bi fold doors? We are interested in the price of a door installed. We would like a price on both a 15 x 15 door and a 15 x 16 ft. door. We live south of Storm Lake, Iowa.

135

Please include a separate cost for the labor to install the door. Please also figure the remote control option

136

Morning, I'm a regional sales manager and we are a major manufacturer of rolling steel doors. I have a distributor who would be interested in supplying your type of door in his market. Southern GA. Do you have a distributor in Southern GA? If not, he would be interested in learning more about your business and your product. He hasn't installed one of these doors before so he would want to have someone visit with him to go over the installation process. There seems to be demand for these types of doors in his market and he is looking for a relyable supplier. Please advise...James

137

I would like more information about installation and have a saleperson contact me on my mobile number.

138

Looking for a quote on a bifold door 65 * 18, also do you have contractors to hang your door? Thanks

139

Looking for a well insulated bi-fold, low maintenance to fit my budget. Something simple for my contractor and I to self-install. I spoke with someone today and received a quote. Please forward me materials on this door and the specs. thanks

140

Please include separately a price for a free standing header with delivery and installation. The building will be erected sometime in March 2007 in Alice, Texas. Thanks, Sunny V.

141

We would like to possibly lea your product in order to be one of your approved installers. Thank you, Bob Z.

142

My door is already up.What I need is your company to come adjust,and put weather seals in the door as soon as possible. I would like to have you do your work before I have foam put on the door. Please give me a call Thanks Gary M.

143

i need to know man hours to estimate for a budget for installing a bi fold door . we will be installing 2 doors ( 1 ) 40 foot wide x 20 ft tall ( 1 ) 26 foot wide x 20 ft tall please breakdown as follows man hrs to hang and sheet doors man hrs to mechanically hook up a get door operational assuming electrical work is by others man hrs required to insulate doors

144

Interested in a floor mount hydraulic door for an opening app. 41'x10.5'. Any contractors in the Akron/Canton area to look at this job? Airplane is based at Wadsworth. Please have someone contact me. Dan L.

145

Please supply me with a quote on a 12' wide x 32' lg. door. list price for instalation, as I may install myself.

146

Hello, I'm looking to get a budgetary cost for a 70'wide x 22' high bifold door for railcar entry into a building. Please advise cost for door and installation. If you do not handle installation please recommed an installer in the Metro Detroit area. Regards, Mick T.

147

Hello, About 1 year ago I looked into the purchase of one of your door systems. Unfortunately the recommended contractor wanted a considerable sum of money to install the door. I would like to explore installing the door myself and thus am requesting a copy of installation instructions for one of your bi-fold doors and one piece hydrolic swing doors. I do have another contractor who lives on the airfiled that I also plan to get an installation quote from but my expectation is that I may be the one to handle the installation due to costs. Also, any recent purchases of doors in my area may help me to locate other contractor/installation options. My opening is approximatly 11.5' h x 42.5 w. My home is on an airpark with an attached hangar. The hangar construction is steel frame. Regards, Steven

148

Hi I'm finally getting my hanger built, I got a quote last spring from you for a bi-fold door 12x42. The building is a 2x6 frame and 3/8" plywood and will have 16 foot walls with the door going on an end wall, so I could use a 48" wedge. Can you give me some detail as to how the frame and header should be built and braced.I have two 36" gerders for above the door and two end trusses. I looked at the info on the web site and there is a lot of bracing ect. for a bottom of the rafter mount , but not alot on one with 4' of header space. Any info would be very much appreciated. Thank You Pat M.

149

I need a price on a bi fold door, electrically operated, opening is 45' wide X 16' tall. If you do installation, I need a price for that as a separate item. The door will not have a personnel door in it. I will provide a 26 GA steel sheet for the skin for the door. The hangar will be in the Raymond, MS area (greater Jackson). Thanks Gordon

150

We are about to place an order for one of your 12'w X 14' h bi-fold doors.Schweiss delivers the door to the jobsite but, who installs it? Do you have a list of approved installers for your door? Do you have a "ball-park idea of how much the installation should cost?Please advise. Thanks,Bill

151

need quote. High13' wide 40'. please send options list. do you install? it sheeting furnished? thanks Felix B.

152

I HAVE RECEIVED BID FROM YOU. WE ARE INTERESTED IN THE HYDRAULIC 1 PIECE DOOR ALSO. COULD YOU QUOTE ME ON THAT DOOR ALSO. WE WILL BE INSTALLING 2 DOORS. I LOOK FORWARD TO HEARING FROM YOU.

153

PLEASE SEND INSTALLATION INSTRUCTIONS FOR ORDER. THIS IS A DOOR THAT CARL ORDERED AND HAD DELIVERED TO HIS JOBSITE. HE HAS CONTACTED ME TO GET THIS INSTALLED AND I NEED TO KNOW ALL THE DETAILS ON THIS DOOR SUCH AS, WHAT FEATURES DID HE GET AND THINGS OF THAT NATURE. THANK YOU