1
We are planning to building a 2x6 stick frame 60x60x16 hanger with a 54 wide door door in Montana. Would like to get a price on a free standing door with straps but are open to suggestions if there is a better route to go. There is also a slight possibility we will go with a metal structure if it is determined the width is too much for the truss load.
2
We are interesting in pricing and installation details for RV doors in residential developments. We are looking for doors that look like garage doors, but have that additional top section that blends in with siding. Sizing will generally be betweeen 12-14' wide and 12-16' tall. I'm not sure what type of door would be best for that as far as bifold vs hydraulic, etc. This will be for future construction on a handful of townhomes to be built starting next year at the earliest in Montana. We are also interested in wholesale/direct shipping options for quantity orders.
3
Hi, *125mph bifold door. *r21 insulation *opening is about 15 3/4 in from side wall *opening frame out for door is on back wall *columns/poles are 3 ply 2x6. *center to center distance between poles is 10ft 4 in *opening dimension between poles ID 9 ft 11 1/2 in *inside wall height floor to ceiling is 15 ft 10 1/2 in *not sure if builder put in a header, as drawing states 10'x10' frame out (of course I can pull a inside wall panel) #are the poles such they would support the weight of the bifold when open? Please provide price include shipping to Montana. and if installer available that price also. Let me know if you have further questions. thanks
4
I'm looking at a bifold door, roughly 12 x 30 feet for new residential construction in Montana. This external surface will be weathered steel (the old Corten). Can I get a ballpark estimate for this?
5
Having a 60x60 hanger constructed in Montana. I would like a 48’ x 14’ clear opening door on each end. The contractor needs your door specs to complete their quote for my project to size the openings. Would like to get quotes and specs if possible. Only possible upgrade would be insulation and installation if MQS cannot install the door.
6
I'm looking for budget pricing on an architectural type bifold in Montana. 27'Wx 13'T and the plan rendering looks like all glass.
7
Building a 36x52 RV barn this summer in Montana. Currently have 2 12x14' doors specified on the drawings. Saw a video of a shop with a hydraulic door and wondering what that would cost instead of the 2 doors. The roof trusses would run parallel to the door, so non-load bearing opening. A ballpark price would help me make a decision. Please send via text or email.
8
May I get a quote on a hangar door for a 50×50 hangar doorframe going to Montana Olympia Steel Buildings? Thanks
9
need a price on a 70 wide by 24 High bifold delivered to Billings, Montana. steel frame, Thanks
10
I have a schweiss bi-fold door model no. S30 No.9 Serial no. 6850 located in Montana. I would like to upgrade to automatic latches and install new seals.
11
I was hoping you were able to provide a revit model of the architectural hydraulic door. Hangar home project in Montana.
12
I am an architect and contractor in Hamilton Montana and I am preparing a proposal for an airplane hangar that will have a overhead bi-folding hangar door where the clear opening width of the door is to be 42'wide by 14' tall. For the design of the main frame for the building at the opening I need to know how much the door weighs. I would like the least expensive option for the opener whether it is hydraulic or strap lift doesn't really matter.
13
I need to get part list number and cost for the winter bottom seal kit and the 12" EPDM rubber seal for top and bottom of the door and side seal 1" x 3/8" For hangar doors located in Columbia Falls, Montana. Thank you
14
I need to get hydraulic hangar door cost for new construction and the winter weather seal kit. For hangar doors located in Columbia Falls, Montana. Thank you
15
I need a bifold with 14’ of clearance for a 40’opening. Possibly a premounted. Hangar in Montana.
16
Looking for 2 doors to fill a 14' h x 20' wide door frame on a preexisting metal building in Montana. Will self install
17
I'm looking to purchase a door that is 30' wide x 20' Tall. I would appreciate some information on schweiss doors in Montana. I may have need for 2 doors, after I speak to the homeowner. Thank you.