Hydraulic vs. Bifold
Hi, We have a metal building already built that is open on the end. We would like to enclose it with a lift-strap bi-fold door. Rough dimensions of the outside of building 70' wide x 30' tall (approx.) please contact me when you get a chance. Mark
I have a metal building spec out. The bifold metal door Says you are the manufacturer What I'm needing is this warranty period and were would I get a door install quote in Anchorage Also if 16 high as to 14 high x 50 long bifold liftstrap door is cost difference substantial and do I reinforce more with 16 high client is asking about height I need quote for my estimate Thanks
I am getting ready to put up a steel building and would like a quote on some Schweiss doors. Actually have two doors planned in the building. The front door is sized at 14 w x 10 h, and the rear is sized at 14 w x 16 h. I was thinking the front door would be hydraulic door and the rear door could be liftstrap bi-fold.
Steel Framed Building. End use: Airplane hanger Door plus labor to install two bifold liftstrap doors on endwalls. Need a 15' Clear Opening.
This metal building will be built around the bifold liftstrap door. I need a 40 ft. Opening 15 ft high. Planning a 12/3 roof, pole building door, cement floor. The building can be 26 ft tall, so bifold door could be made taller.
My steel bifold door height is 15'4" at bottom of door when open. I need to know what Schweiss Doors recommends for a free standing header for a post-frame biomass building door.
I am working with a steel building company to get a bifold door price quote. He recommended your company for a bifold door because you have liftstraps. I am looking at mounting steel door in a 45 foot wide end wall 40 feet-45 feet in width and 14 feet high. If I purchase the property at auction next week I will move forward with the planning.
We have an existing red metal building door, we'd like to add two 30' wide x 24' tall metal doors to one end. Price and delivery for Schweiss straplift bifold doors.
Looking for a Schweiss bi-fold metal door around 45 wide with a 20 foot eve height. Please let me know if you can custom make this metal strap door for me. Include price for door autolatches and remote door opener.
WE NEED TO GET A PRICE ON 3 METAL DOOR OPENINGS 10' X 7' 16' X 7' 18' X 8' BI FOLD DOOR WITH LIFT STRAPS. THIS IS NEW CONSTRUCTION METAL BUILDING
We would like a insulated straplift bifold metal door approximately 25 ft wide X 14 ft high. Farm shop door will go on the side wall of an existing metal building that has 16 ft sidewalls and has steel beams (columns) on 25 ft centers.
We have a 1976 metal building, 2-Bay Hangar (11,200 sq ft) that is equipped with 65' x 20' metal bi-fold doors. Would like to get pricing for 2 more hangar doors of the same size. Strap doors with door openers, installed by Schweiss Doors.
Quote a 40x18 clear bifold freestanding metal door with lift straps. Door ready for liner panel. Please price free standing door header and its installation as a separate option. Send door design specifications for builder.
40' x 16' Bifold door to be placed in the endwall of a single slope new Steel Building. Owner wants Schweiss bifold lift straps and remote control opener.
I have a customer that will be purchasing a 40x16 clr Bi-Fold door w/a 24" wedge. Schweiss straps and autolatches, remote opener. I am trying to price the metal building to him, can you please get me the specs to design for the door. Building used for biomass storage will be going to Dodge City, KS
I am quoting a 60'x60'x20' metal building, with 18" 35lb. rafters and columns. I would like a quote for 2-57'x18' Schweiss straplift bi-fold units with autolatches (will be on gable walls of bldg.). Include windows and walkdoor. I will put R-10 vinyl insulation and 26 gauge sheet metal on the bi-fold units
Need liftstrap Schweiss metal bi-fold doors for a 50 x 50 biomass building. Please contact/send me options/details including price. Thank you.
I am dealer for Steel Buildings. I have a customer looking for a 30 x 18 insulated door in a new 80 x100x 18 Building. I believe we should be looking strictly at your Schweiss hydraulic door, due to its great lifting power. Please get me a quote asap.
Looking for a price for my customer a 24 x 16 bifold door with straps. Looking for all costs, does door price to include shipping or delivery, installation, steel by you or me, r factor on insulation, footing size post size.any questions please call or e-mail thanks
Hello, I%u2019m looking for a budgetary quote for a Schweiss Red Power hydraulic door on a metal building that is still in the planning stages. It will be either a stick framed or S.I.P. panel constructed structure supported on a 48%u201D poured concrete wall / footing foundation. At this point the side columns can be either steel or wood, whatever you think would work best in this application.
Looking for a door 30'wide 20' high non insulated. for a steel truss building ( 60 x 200 x 23 foot eave 2 x12 pitch on the roof).This door will be in an end wall. The end wall is not built yet so it can be built to match the doors needs as of yet. I would like a quote on either Liftstrap bifold or Red Power hydraulic cylinder open door.
Thank you for providing the previous quotes. Now, can you provide an installed price for a 50' wide x 18' hi Liftstrap Schweiss steel bifold door? Also, can you direct me to the detail page that shows the load reactions?
This quote will be for a steel shop door the size will be 24 wide by 13 high if thats possible if only available in even sizes please quote me a 12 and 14 ft high as this is going on an existing shop we want it insulated with and opener as well I will pick this door up myself so no shipping is needed thanks Russ
Need price on door and installation for metal building with a 14hx40w opening, strap lift, not cable lift insulated with walk through door within bi-fold door.
I would like a price for a Schweiss Red Power hydraulic metal door delivered to a building site in Princeville, IL The customer would like windows and walk thru door.
I'am building a steel building 150' by 50' The owner want a insulated 18' by 40' bifold Schweiss door with liftstraps a mandoor & windows. I would like to get a price on one of your doors. I have worked on hanger doors for a large airplane Co. In Wichita Ks. I would like the price on this size that can be installed by us.
I have a metal building 54x75 with sliding doors. I have a terrible back and the south door that is killing me. Call anytime in the afternoon tommorow. I live 50 mi west of Des Moines, Iowa. or 4.5 mi north of Panora Iowa. I hope your patented Schweiss straplift bi-folds will work on the side that is 54 wide. I think the opening is 25 or 26 wide and 14 tall.
I need a quote on a bi-fold liftstrap as well as one piece Red Power hydraulic for my metal building. 45x12 clear deliverd to TX 76048 Thanks
I need to get a price and specs for a 60' wide x 16' high opening bifold liftstrap/autolatch model door, all metal building. Will be located in the endwall. Man door with window, non-insulated.
We need 3 24\'wide x18\' tall doors on a new steel building. We need 1 24\'15\' tall on an existing steel building. Also would entertain a 40\' x18\' tall on an endwall instead of the 24x18 that is planned. We are not sure if a bifold with liftstraps or hydraulic Schweiss door is best. Probably go with the least expensive. Ag machinery storage in southern Kansas. Building is ordererd and additions to order are easily done. Local steel building material yard is furnishing material
We are in the preliminary stage of designing a snow removal equipment steel building for an airport. Can you provide us with a budget cost for a bi-fold door with lift strap operator? The approximate door size will be 55'-0 wide x 14'-0 tall with pre-finished steel panel skin on exterior face. The door would be shipped to Russell, KS 67665.
Our company is a manufacturer of rural and industrial large and small metal buildings. We have been having a lot of calls for your Schweiss rugged style of door to be included in our sheds and commercial buildings. If it would be possible could you please submit a price for the following hydraulic Red Power lift door. The door is 60\' wide with a 12\' drive through height. It will have a zincalume metal cladding which we will supply. If you could send through a detailed quote that would be great. Also if possible to have freight included if that\'s not possible I can work it out. Look forward to your response.
I am metal building supplier from Qualicum Beach, B.C. I am looking for a price on a Bi-fold door. I am needing a price on a 70X16 bi-fold including liftstraps and everything, except cladding and trims. Including shipping. Thank you,
I am in need of your Data on two sizes of Bi-Fold doors with your patented lift strap system that are called for going in a Metal Building we are designing. One door is a 60\' x 18\', One is a 40\' x 18\' Design loads are IBC 2009 30# Snow 90 MPH wind load. Job Site is Provo Utah 84601 Doors will be going in End Walls of a 80\' wide x 22\' eave height 1 on 12 roof pitch. I need your data sheets to design my framed opening for your door system.
Looking for a price on a single panel or bifold liftstrap door. 42' wide x 10-8" tall clear. 2010CBC, 85 mph wind. Framing information clearance for header support and jamb supports for door. Electrical information and any addtional information I may need to give to my metal building supplier.
NEED A PRICE ON BOTH TYPE DOORS. CUSTOMER WANTS THE MAX CLR HT HE CAN GET. I AM GUESSING AT AROUND 16-0. OUR METAL BUILDING WILL BE 18-0 TALL SO WE WILL NEED A SMALL WEDGE ON THE BI-FOLD DOOR. INCLUDE LIFT STRAPS ON THE BIFOLD AND RED POWER ON THE HYDRAULIC MODEL. BOTH INSULATED.
I WAS VERY IMPRESSED BY YOUR DOORS, BOTH THE DESIGN AND THE OVERALL OPERATION OF AND I WOULD BE VERY INTERESTED IN OBTAINING MORE INFORMATION ON IT. I CURRENTLY HAVE A 14 X 20 FT OVERHEAD DOOR ON A 16FT WALL ON MY 50X180 FT METAL BUILDING. I AM IN THE PROCESS OF TURNING 55FT OF THE BUILDING INTO A HEATED SHOP AND WOULD LIKE TO REPLACE MY CURRENT OVERHEAD WITH POSSIBLY ONE OF YOUR HYDRAULIC OR MAYBE A BIFOLD LIFT STRAP DOOR, 16X20 SO I CAN HAVE FULL CEILING HEIGHT. COULD YOU PLEASE SEND ME SOME MORE INFORMATION OR HAVE ONE OF YOUR SALESMEN CONTACT ME. THANK YOU FOR YOUR TIME LOOK FORWARD TO HEARING FROM YOU FOLKS, THANKS IN ADVANCE.
Need metal Bifold liftstrap door, 90 MPH wind loading, will have R-26 fiberglass blanket insulation (by others), full weather seal, motor operated with manual operation back-up operated by one person, key lock out, emergency stop button, extra remote, and 2'-6" wide X 6'-0" personnel door with keyed lockset located in the center of the bottom door leaf. Delivery to northern Idaho.
I am working with steel buildings and need to design a 60x60 metal truss wood/metal hybrid aircraft hangar. I was told I should ask for Jeremy R at Schweiss to help since they have worked together in the past. The building has 16 ft sides and the peak is 26 ft giving it very close to a 4/12 pitch. The two of you will have to work together to determine what max height/width hydraulic Schweiss door I can install and still have room for a standard garage door as well. Both would be on the front of the hangar. Thank you
Please quote for vertical bi-folding lift strap doors for the following sizes: 1) 6000mm W x 4000mm H %u2013 4 nos. 2) 5000mm W x 4000mm H %u2013 2 nos. Include price for extra remotes on each door. These doors go on a metal building.
Please fax specifications for Metal building supplier and fax quote please. Please quote Schweiss bifold with labor and material with strap lift. 18' Clear
I need a quote on two bifold doors. Each door to be strap lift. Doors to be located in endwalls of building. Please include installation labor. Please fax door design information so we can send to metal building supplier. Do not email information as our servers do not communicate with each other very well for some reason. The first door we need is a 80'x17' clear and the second is a 60'x14' clear.
I am looking to quote a 40' wide by 16' high (or 17' high) bifold Schweiss door in a new metal building. It would be on the sidewall of a building with a jack beam to hold a roof rafter. The clear under this jack beam is approximately 16'-3". The building is not insulated. The buildiing is used for sandblasting. It is located near Waverly, Nebraska.
Thanks for the quick response, I would consider the next standard size larger metal bifold door larger than 40' width. 45 or 50' ? Please quote installation by Schweiss.
I have a metal building that I am putting up and would like to know what a bi-fold door would cost. I would like to have a 36 inch walk in door, and window. The top is rounded and center peak is 16 feet. The sides go straight up 113 inchs and opening is 18 feet 9 inches.
I need a quote on a door for a metal building I am purchasing that has a 12 x 12 opening. Am interested in the strap design. One question, with the door in the open position how much clearance is there between it and the ground. Can you build a stronger door for high wind areas.
Hi again guys and gals, I am a past customer. I need (3) doors 24wX16t and also (1)- 44'wX18t, all with openers that will all go in the end walls of a post frame or red iron building. The red iron is looking like it will be the route I want to go right now. I would like quotes on both BiFolds w/straps and Hydraulic please. (2) 3'X5' or so nice sized windows in the big one. Open/Close/Stop controls for all with 12 remotes that will control all 4 doors.
I have a metal building located in Clark, South Dakota. I'm unsure of actual size at this point - just tired of opening and closing the heavy sliding door! I understand your bifold and hydraulic lift one piece doors open and close easy and snow and ice don't affect them. I should have done this years ago. I'll get back to you on sizes.
I would like a quote on a bifold and hydraulic door for a 12.5'x 22'. I would be looking to install it myself on my metal building. Include price for insulation, remotes, lift straps and Red Power. Thank you. -Ricky
I need pricing on the Schweiss bifold metal doors listed below. I need the door to have at least some insulation, come with your fast strap system and have remote openers. Your bifold is a honey of a door. My uncle has two and swears by them. He does a lot of swearing anyway, but does like your doors He got his first one back in 1981.
I have a metal building. 40' x 80' x 14' at eves. I would like a quote (delivered) and engineering requirements (header/posts etc) to put the widest possible Schweiss bi-fold door on the 40' end. Schweiss strap system please.
Please also quote another Schweiss Bifold Door #2 for the other endwall 42X17 with straps. Metal building will be block side walls with steel end walls due to city fire wall requirements. Include all the upgrades I mentioned for the first door.
I am putting up a metal building that will require one Schweiss bi-fold strap door 30 ft.wide and 14ft. high. (need 14ft. clearance when door is open. Another door to be 14' x 14' bi-fold that will be used primarily for ventilation, but will face high winds during storms. I will install and insulate both doors. Want lift straps for good seal and fast lift. May I have a quote including shipping for each door please. I will need to know the structural wind load requirements and size for each opening please. Thank you, Curt
I am bidding a project for which the Owner has requested Schweiss Bi-fold Doors. Quantity of 3- 50' wide x 25' minimum opening clearance. Lift straps with a back up system on a metal building.
I would like a quote for a 36' by 16' door both in Schweiss bifold (lift strap) style and hydraulic (Red Power) style. I have a metal building 45' wide and sixteen foot sidewalls with a 36 by 16 opening. Thank you Christopher K.
Interested in your Schweiss steel custom built remote and auto latch door systems. Need 8 windows - 4 on upper and lower bifold levels. How quickly can you get a quote or response to me along with any recommendations to improve what I now have on my metal building?
Need info on Schweiss Hydraulic doors. Side columns are 6"X8"X1/4" (we live in herricane area) Would like to keep near 12' clearence heigth. How do your doors handle big wind loads?
I'm looking to buy a 16' x 40' Schweiss hydraulic door and require a quote from you. An email would be fine.
We are quoting a new pre-engineered metal building. I have one door opening 30'-0" wide x 22'-0" high. I would like quotes for a bi-fold door and a hydraulic door for that opening. We've ordered Schweiss doors from you in the past and are very satisfied with your quality workmanship.
Putting together a metal building package for a ag building approx. 80' X 160' - (2) 40' X 16' clear door openings, (1) in the sidewall and (1) in the endwall. Can I get some input from Schweiss Doors for the proper design, both for bifold and hydraulic doors
Schweiss door set up needed. (1) 40'x19'4" opening Schweiss bifold dooor with strapps, remote , insulated. I will provide steel and flashing inside and out. the may be a couple windows included. (1) 40' x 19'4" opening Schweiss hydraulic door. I will provide the steel inside and out, insulation, You can install. Again window may be added.
I own Schweiss door Model S224, serial # 6588. I appreciate the craftsmanship in each and every one of your bifold/hydraulic doors.
I am putting together a price for a new building, 120' x 200' metal building in SD. I would like to get a price quote from you on some Schweiss lift-up Hydraulic Doors that we would like to offer as an option to the Owner. Schweiss Hydraulic Doors needed: (1) 30'-0" wide x 18'-0" high (2) 25'-0" wide x 18'-0" high If you have any questions please feel free to contact me at our office.
Schweiss Doors: I Need a price on a price 65 x 22 clear opening with framed opening delivered to Cambridge Ohio Will go into and endwall of a metal building
I've got a customer that wants a 60'x15' Schweiss bi-fold door. This will be going on a new metal building. I am designing the building now but need the heights and what ever information that you can provide about your door so I can send it into the metal building company. Thank you.
The building is an upgraded masonry and steel building in Berkeley, CA. We would like the door from Schweiss Doors to have a metal skin; aluminum or steel wit no windows. If steel, it does not have to be stainless; it could be bare hot rolled or Corten. Question: if the power goes out, is there a way to manually open the door whether Schweiss bifold or hydraulic? If bifold door, what is the maximum vertical dimension (ie height) of the fold? Does your quote include freight, tax and / or installation?
I'm about to build a shop and I'll have two 20 ft x 16 ft doors and one 24 ft x 16 ft door. Do you mind sending me a price for Schweiss bifold or hydraulic doors on this do I can compare it to regular commercial roll up doors? The two 20 ft doors will both be end wall doors, and the 24 ft door is a side wall. It will be a metal building. Thanks Stan Dewmeister
Would like to get a quote on a Schweiss Bi Fold Door. The building is a newer existing metal building. We have dims and can answer any questions needed. Thanks.
Could you tell me how much head room is needed for your Schweiss bifold door. I have a customer that is looking for a 18' tall metal building and would like a 24' wide door with as much clearance as he can get. He wants to know if he can go with 18' sidewall and a bifold or if he is going to have to go with 20' sidewalls. I can't recall what the clearance was on the previous doors we priced out was. Thanks
I am pricing a new metal building for a farmer and am working on finding the most economical fit for the doors. He is wanting a 60' x 75' building with a 20' x 16' door on the 75' wall, and a 30' x 16' door on the 60' wall
I have asked for a bid on a 14'7" wide door and it is 12' tall going on a metal building, can you please tell me the price of both installed and not. I live in Chariton IA - Thanks
We are looking for two Schwiess bifold doors 40' x 14' for an metal agriculture building. Could you provide some budget pricing for those?
Metal building: 30W X 50L with 12' high side walls on reinforced concrete slab. Walls will be 26 gauge R panel. Roof will be 2:1 pitch Galvalume. Frame is heavy steel pipe (anchored in reinforced concrete)with 8" I-beams(13 lb. per foot) attached on ends & in middle of building. Will use 8" "C" purlins (Girts & roof support). The frame will be welded. I'm interested in 12w X 10 or 11' high on each end of the building (2 bifold doors).
Remodeling existing building would like to install a vertical lift door that is 32ft by 15ft, building is metal frame a truss
I need to get a price on a door for a hydro powered 12H x 40W opening. The building will be a metal building
Please contact me concerning a project at Mesa Verde, Colorado and there request for a bi-fold door 14wX16h on the new metal building we are building for them.
I have a customer i have quoted a metal building for. He is wanting this By-Fold Door in gable end of guilding. In the quote I need siding, insulation and lift straps.
We are quoting a metal building in North Dakota and I am looking for a bi-fold door size with an opening of 16x40. Can I get a quote on a door with shipping to Garske, ND. Thanks
I am quoting a metal building to a customer in Nebraska. The building will have a 40' wide by 17' (clear) opening in the gabled endwall for a bi-fold door. Can you send me the clear opening and door loading/reaction information so we can design the building accordingly? Please call or email with questions. Thank you -
LOOKING FOR INFO FOR A 30X16 BI-FOLD FOR A CUSTOMER IN JINES, MI. GOING IN A METAL BUILDING CENTERED IN A 75' END WALL WITH 18' EAVE. WOULD LIKE TO SEE SOME SPEC ON ATTACHMENT POINTS AND WEIGHT OF DOOR. THANKS CORY
Need specifications for a 70 x 28 clear bifold door located centered 79'-0 wide x 35'-0 tall 1.5/12 RS metal building.
Please send me technical brochure on Hydraulic and Bi-Fold doors. Especially the hydraulic door. How it connects to the Metal Building. Jamb and Header connection details. Loads the doors imposed on the metal building. Thanks, Ahmmad T, PE Estimating Supervisor
NEED A PRICE ON TWO 40X16 CLEAR BI-FOLD DOORS GOING TO KS. GOING ONE EA ENDWALL OF A 70' WIDE METAL BUILDING. do you also install doors if so need a option on that. thanks Cory
I need a quote on a 90x27 and 70x27 bi-fold hanger door to use the specs on a metal building quote
Can you please provide the specs for a hydraulic door that will fit in a 90 x 25 clear opening. THE OVERALL OPENING SIZE FOR THIS DOOR NEEDS TO BE 25' NOT 29'. My eave height for this metal building is 35'.
I'd like to speak to a someone in sales about using Schweiss bi-folds on our metal buildings. Would be helpful to get some input on how we quote/design our buildings to accommodate your doors in order to make it more efficient and economical to our customers.
We are designing a 12,000 sq. ft. Metal Building to be a Fire Station and Ambulance Service Facility. The main street elevation will have 5- 14'x14' sectional doors. On the opposite side of the building we would like a single door with a minimum width of 32'-0" or- x 14'-0" in height. Is this possible when we have to design to 90 mile an hour winds in this area ??? Can you give us some information,literature on this matter? It would be greatly appreciated, Thank You
ALSO PLEASE PROVIDE IN ADDITION TO THE PRICE OF THE DOORS THE LOADING TO THE METAL BUILDING. THANK YOU
To Whom this May Concern; We are a commercial construction company that specializes in Metal Roofing, Structural Steel & Pre Fab Metal Building Erection. We are interested in reading more about your product. Would you please mail a catalog
I need to replace a old wooden door on a metal warehouse building. It's 12'wide x 14 high. We'd like a door with a regular, pass through door installed on the bottom. The pass through door will give the workers access to the warehouse without having to fully open the door. Do you have installers in Connecticut? I need to purchase the door before the end of the year.
We are building a 80' x 100' x 20' metal building and will add one of your bi-fold or one piece doors at a later date. We need to know what kind of metal and concrete framework that we need to do on the initial construction to accept your door. Door size 44'w x 14'h.
I'm building a metal building and will have a grass strip runway. I am looking for a bifold door for an opening of approximately 40'. What do you have in this size and what is the cost.
looking for 2 doors to hang on a metal building with metal siding. one opening is 20ft. wide and 16ft. high. the other opening is 30ft. wide and 16ft. high. we will install. builiding shown on website. thanks anton
We have a100x100 airplane hanger metal building, we need a 60 wide by 16 tall hanger door delivered and installed in Silver Springs, Nevada. the specs that we are concerned about are Accordian type, fiberglass translucent material,tinted hardened something in those lines. thank you, Jessey
I AM INTERESTED IN A 35' BIFOLD DOOR AND I AM GETTING METAL BUILDING QUOTES FROM 3 DIFFERENT COMPANIES. CAN YOU FAX THEM INFO ON PROPER DESIGN OF ENDWALL TO SUPPORT YOUR PRODUCT. THANKS MATT V.
i have an existing metal building built as a hanger with a semi non reliable roll up door 42 by 22 ft. my customer would like and needs something else very reliable. medi vac copters fly in and out of his hanger constantly. it has to work well here in west texas.80 to 100 mile per hour wind is not uncommon. please respond with your ideas and we will approach my owner thank you tommy h.
Can you please give me a quote for two 70X20 clear hangar doors, they will be going into a new metal building used for a skydiving business please include alternate pricing for safety devices.
Please price two - 48' x 18' doors to be placed in the endwall of a 200' wide x 90' long metal building with 22' eave height and 1/2:12 roof slope
Needing a price on a 32' wide by 16' tall Hydraulic door to be mounted to a new metal building. Whichever mounting style is the best we could make work with our building. Also an option for installation in Arkansas city, Kansas.
Need to know framed opening demensions and header space to provide to a metal building company for a 50' x 18' bifold door.
WE ARE A METALLIC METAL BUILDING ERECTOR AND NEED PRICING ON 2 DOORS FOR AN UPCOMING QUOTE
Looking for (2) 25' wide x 13'-7" high bi-fold doors, end-wall mounted on existing metal building. Would be below building's gable frame. Need installed quote ASAP. Client wants to right PO ASAP!
I am looking for a quote only along with approximate weights and attachement points. I am working on a design build with a customer and I need to have information for into the metal building design.
Please give me a price on the door as described below. Give me an idea of how the exterior metal skin of the bi-fold or hydraulic door is to be installed to match the metal building. Please reply with email to let me know you received this request for a quote and when you expect to have a price back to me. Thank You, Eric S.
Hydraulic one peice door (1) 32' wide x 16' high (3) 16' wide x 16' high we will install these on 80x100 metal building. Frame for building will be I Beams. Door frames will be 4" x 6" rectangular tubing.
I am looking to build a metal building with a bifold door in the end wall. I would like the price for a door with strap opener measuring 36ft. wide by 16ft. tall. Thanks, David.
I am a metal building manufacture in south texas. need the design loads on a bi-fold door to go into an endwall of a metal building. The door is 60' x 17' The building will be built around Austin Texas 90 MPH wind load Also need Total Door Weight with 26 gauge / R panel sheeting
PLEASE FORWARD A QUOTE (INSTALLED AND UNINSTALLED PRICE) ON ONE- 56'-0" X 15'-0" MOTORIZED STEEL BI-FOLD HANGAR DOOR FOR A METAL BUILDING TO BE CONSTRUCTED IN NORCO, CALIFORNIA. THANKS, NEIL STALLINGS NEW CONSTRUCTION DIVISION MANAGER
HI for H. Iron Works. I am doing the prliminary layout and design for the metal building and would like to get the hinge post spacing and minimum jamb size for this size door Thank You, Tim W.
i built a pole barn type shed,in 2004, 40 x 82.5 with a 15ft leanto addition, we have 2 sliding doors that are insulated and lined, they are heavy and do not keepout the draft, and freeze to the snow and ice. i thnk i have about a 20ft x 16.5 opening for a door now, would i need the shed to be reenforced before i would buy or hang a by-fold door? what approx would a door weigh, i would like the strap version of the opener with the auto looks and opener.
I am working on a Metal Building with a 20'x70 door in it. What kind of loads are imposed on the structure by such a door size and or what magnitude deflections can be tolerated by the door, ie vertical frame deflection, horizontal frame sway. I get the impression the support member directly over the door needs to be braced for inward deflection normal to the wall. what deflection is this ?? Steven H., P.E., S.E.
I need a price for 6 Bifold doors. The doors will need to be 22'wide and have a clear opening of 24'. Please contact me as I need to know how high I need the eave height to be. The doors will be going in a metal building sidewall. What do I need extra to carry the door? Please respond ASAP. Thanks, Les
Looking to replace a fabric door in existing metal hanger. Current opening is approximately 72'Wide X 26' High.
I am in the process of building a metal building with two 14 X 14 Feet doors and would like to give the New Hydraulic door (single not folding) consideration.
I am interested in a bifold door for an existing structure the door openings 19-6 wide X 14 High it has sliding doors now it is a pole building that is finished into a shop. Terry
PLEASE SEND BALL PARK FIGURE FOR A 14 X 40 FT BIFOLD. ALUMINUM . METAL BUILDING. THANKS JIM R
Please submit quotation to supply and deliver a BiFold door per specifications filled in below. The clear door opening required is 40ft wide X 12ft high. Provide separate prices as follow: Option 1 - Hydraulic operated Option 2 - Electrically operated Break-out price for Remote Control Please list down standard parts and features that are included in the price. Metal cladding ang trims for the door will be provided by the Building manufacturer.
I am a metal building provider. I am currently looking at a project involving several hangars and would like info on your doors. The more info the better. I am putting together package prices and need prices on the different sizes and options. Also specs with loads for my designers would be EXTREMELY helpful. Thank you.