Power will be off 9-9:30 today
Schweiss Doors logo



Let's Talk





Hydraulic Hinge
On Steroids

What People Are Asking?



I have a small residential project in Palo Alto CA and we are interested in a hydraulic garage door with custom cladding. Please send over a quote.


We are looking for hydraulic residential doors. We need 3 hydraulic doors for our new construction home. 1x 10x8 rough opening 2x 8x8 rough opening.


Need quotes for hydraulic cantiliever residential use doors for a current project. For plans and questions please email me.


We are interested in a one-piece hydraulic door that is 20 feet wide and 12 feet tall. This is for a residential garage. We would want glass panels that are either frosted or slightly opaque. What kinds of design options are there and how is your pricing structured? What is a rough estimate of price range and how long does it take from order to install?


Hi long time ago we bought a 40x40 bifold door from Schweiss, that is working just fine in a shipyard. Now i have a customer that wants to get a 25 x 8 hydraulic door for a home, the problem is that the door needs to be installed outside, on a wall to the street, Is this possible? Also the house is very close to the ocean Thanks if you can return this questions, Evan


Wanted to get options and pricing for various size one-piece hydraulic door products for single family residential homes.


I am interested in understanding budget pricing for a 18' x 8' hydraulic designer door for a custom new home in Boulder, CO. It will have a fairly thick finish wood veneer build up on the exterior face (5/4, 6/4, 8/4 accoya wood slats).


Hello, I am interested in the 16X8 bi-fold or hydraulic door for the back wall of my home. I want to put glass on it, would a residential hydraulic glass door be better for that.  Please get back to me at your earliest convenience 


I am not sure if you make small hydraulic or bi fold doors, but I am looking for around 400 36"x 80" - louvered, bi fold doors for a NV apartment complex. They will be used for the entrances of the HVAC units. Any help or information would be greatly appreciated!


We are in the design phase of a private residence, and we are looking to use a Schweiss hydraulic or bi fold door at the garage / carport portion of the WA project. We were looking to see what typical details you may have for architects. Some general information is that the primary structural system will be a welded tube steel column and beam fabrication. Our clear opening dimension between the structural tube steel columns is 19'-6, and the clear dimension from the top of slab to tube steel header is 8' to 9' tall. 


Please quote the following project. This is a CT  residential development project that will be 18 units built over a 3 year span. I need a price for just one hydraulic door unit at this time for the template building that will be built this fall. I have preliminary drawings if you would like them for reference. Please contact me to discuss.


Need a ball-park quote for 16' x 8' hydraulic door  with custom corrugated metal siding of 3 new houses in AR.  THX 


Looking for general pricing on residential hydraulic doors. Can you send me prices for standard single car garage. 8 x 8 or so. Not sure if standard size is substantially less than custom sizes - we are in pre planning phase on this project so can be flexible. Looking for factory style steel paned (or look alike) door. Also, this is to be used in the house, not garage, so we wouldnt want straps or bulky systems, so if the structure of the system depends on size of door, please let me know those perimeter. Also, curious of general shipping costs to Reno, NV. Thanks!


One of my customers expressed interest in your one-piece hydraulic door for a new custom home at the New Jersey Shore. He is also a pilot and is familiar with your bi-fold products and says Schweiss makes the best quality doors on the market. The home is still in planning stage. Approximate size of opening is 16' x 8' Please advise of the details you need to provide a proposal.  


looking to build a smaller pass-thru hydraulic glass  window/door for a OR customer patio area,your hardware looks to be what he is looking for,the unit will not be very big as far as what you have built before,please call and I can explain what we are after


I would like to get a quote and suggestions on engineering for a 27 wide Schweiss hydro swing doors for a high end residential project in beverly hills, ca. The door would have a wood slat finish similar to one of the projects in your gallery page. Is there someone I can consult with this.   ps...i noticed you are in a 507 area code, so you may not be far away from my home town (Mankato)


I am working on a residential application for a customer that wants an upward swinging hydraulic door. They want a standard garage door look with a nice canopy the hydraulic door offers, nothing extravagant, preferable insulated interlocking panels. Opening Size: 15'10"x7' Can you please send me pricing, installation instructions and literature for this request. thank you


I have a very small residential project in NM under consideration. Can you give me a ballpark number for the least expensive option you would have for a contemporary all glass aluminum hydraulic door 12' x 8'?


Need to get rough est of cost and install for residential hydraulic door application. Glass door approx. 9.5 ft wide x 10 ft high for NY home.


Hi I'm writing to get a ballpark estimate and talk about the capabilities of your hydraulic residential door systems. We have a client in AR  that wants a 12' wide by 12'-9" tall hydraulic one piece door that opens up completely and connects to the outdoors. Please give me a call/e-mail when you get a chance to discuss. 


I'm looking for a hydraulic door with a hinge to handle opening a in-floor door that is heavy, one that will take off the load of lifting up the door. How soon can I get a door to SC?


I am looking to install a hydrolic system one piece door for a short 5' staircase. Its to swing up in order to access a storage space behind it. I am not sure of weight as of yet, as I will be ordering the staircase based on the Schweiss hydrolic Red Power system abilities. Please let me know what a simple hydrlic system for about 100-150 lbs can run me.


I'm looking for two residential Schweiss bifold garage doors, approx. 10'W x 8'H, suitable to have T-111 type wood siding on the outside surface. Can you give me some pricing and installer references?


i'm currently sourcing windows and bifold doors for a house remodel. your  Schweiss bi-fold door seems like they'd be a great fit however i'm wondering if the are a bit too beefy or industrial looking for a residential environment. do you scale down your extrusions based on the scale of the door? can you do a bi-fold window? i have two locations where i could possibly use a Schweiss bi-fold door/window: 1) r.o. 13'W x 12'H 2) r.o. 7'6"W x 4'H (window)


I am designing an addition to the house to shelter an Endless-Pool--and want the side wall to open entirely in summer, but closed in winter. Your bifold appeals, but this will be in a side wall and the eave drops down to a level only about 5 inches above bottom of header, so doubt there is space for the "wedge". Thus, it looks like the hydraulic door will be a better solution. Door will be sheathed with same wood-product siding as house, but I will want an openable window in it as well (for light and ventilation when door closed). The opening is only 12' wide, 60 inches high. Can you give me a rough ideas of cost (not a "quote" I'll hold you to).


To whom it may concern, I would like to have a quote for 2 door options, both bi-fold and hydraulic / one piece. The door is for a residential garage, and we intend to clad it with cedar siding. Feel free to contact me if you have any questions.


Hi, I have a 8' x 4' trap door that goes to my basement and as I'm getting older it is becoming difficult to lift it. I was wondering if you have a hydraulic door that would lift up out of the floor. Thanks.


Can we retro fit a Schweiss hydraulic system to utilize your new Red Power pump?


Do you make hydraulic and bi-fold garage doors for residential houses? What kind of price am I looking at on a single garage door? How hard is it for a homeowner to install?


I need a small 1 piece or a fold up door for my pool equipment which is in a recessed enclose. This is to prevent freezing in the winter. Yes it does get cold enough in Texas to freeze pipes. Doug


I am looking for a hydraulic door that can be used as a security door at night and an awning during the day. The current building is a wood framed garage with a 12 foot wide sliding glass door on the end wall. Panel siding (wood) covers the building(no stucco to contend with), 220 volts is available in the building. Panel siding would be used on the hydraulic door to match.


We are looking to use a hydraulic door for a residential apllication and needs to be miami-dade county approved. We need information asap. Thanks.


I would like to investigate having 2 residential bi-folds systems to put on my house so I can have car lift. (2) 8x8 doors. (Standard)Whats involved?


We have a house design that calls for 4 hydraulic sunscreens/doors. The heights are fixed at 9'-1 1/8" with varying widths, the greatest being 25'-8". We are going to detail the door so that the frame is concealed. All are exterior applications.


I'm considering replacing a 16'w x 7'H residential garage door with either bifold or hydraulic door. Also want to know if I can build the door panels myself of FoamKore or similar plywood/foam laminated panels (and would need to know specs such as acceptable weight/sq.ft.). Can you please give me a ballpark idea about pricing.


We are interested in a hydraulic door/wall for our veranda. We could use either a 16' opening wall without man door or a 25' opening wall with man door built in to the wall.


I need 8 of 8'x8' single piece garage doors. Please provide me the details about the function of the doors and their price. They will be residential use and mostly have wood construction underneath. thanks.


I am interested in this one piece Schweiss door for residential scale projects, I would like to veneer the frame with cedar slats or what ever the customer would like. Do you use smaller motors and drums if the weight allows you to? I would like the frame thickness to be 6" if possible. Thank you


Looking for quote (aprox will do) for residential hangar door. Can use either bi-fold or hudraulic one piece. Opening is 40 x 12. I did business with you before in about '03


I am in the beginning stages of designing a 2 bay garage to replace the one car. Space will be tight. Thats why I beleive that the Schweiss bifold door will be perfect for me. Outside DIM 20 feet. Of which I need to bays. One for actual car storage, the other to open to bachelor studio apt with 5-6 feet clearance to outside fence line. Optimally would like to have patio furniture undisturbed by opening. Is that even possible. I want the door to have windows for eastern light. Let me know what you think and costs, of course. Thanks


Residential door connecting interior space to outdoor deck. Divided insulated glass panels are ideal, similar to those shown on the Palm beach resort or the Guthrie center or one of the residences with all glass bifold doors.


Have a residencial remodel. Would like a quote on a Schweiss 8'0"x7'0" Bifold and hydraulic door. Thank you, Darryl


would like to know high, low price range for a 16 ft. wide X 14ft high hydraulic one piece door for RV garage on a new 15,000 sq. ft. home to be built in Punta Gorda, Florida. The Schweiss door I'm getting will have some type of Stucco/Dryvit applied to the exterior header and upper 6ft of the by-fold or hydrolic door and a false garage door applied to the lower portion of the door (8x14 garage door) to match the other 3 automobile garage doors on the front of the house. The house is in the final design process and the door will have to be meet wind load testing for Miami/Dade. The home is in the 130 mph. exposure "C" Zone. Please contact me ASAP please. Thank You. Phone or Email is fine.


This is a residential application with glass panels, similar to the "San Francisco Architects" or "New York Storefront" application in your photo gallery. Please quote a swing door that is 20' x 8'.


Hi, We're planning on building a LEED certified home this winter, and are interested in using one of your doors in place of french doors. We would want one with all glass panels. I read that you've installed bi-fold doors in LEED certified homes before. Can you send me any infomation on that? And/or on how well insulated they are? Lastly, what is the U-factor rating?


Hello We are in the Residential Industrial and commercial door buisiness in Israel for the last 30 years . Currently we are interrested in the operator and complete drive kit for a hydraulic door


Would like to review one piece hydraulic door types and project requirements for a residence on Vancouver Island, B.C. 4 different doors, very different sizes. 3 wood clad, 1 metal clad. Your input greatly appreciated. Looking forward to using your product(s)3 Thanks very much


I am building a garage with an 18' x 7' opening. I would like a quote on a hydraulic door. It is for a residential application and I would like something that somewhat resembles the standard garage door already on the house.


Custom Designer Garage Doors with wood siding has it's own unique pattern & glass windows located in the top portion of garage door to give the home owner natural lighting. interested in 3- 10 x 10 insulated wooden hydraulic doors (no sheet rock) and an estimate.


I have a typical 2 car garage with overhead doors and openers. I would like to gain the space taken up by the overhead tracks and doors. I've considered horizontal sliding barn-like doors. When I contacted one residential door company, their suggestion was roll up doors similar to those used commercially. Would your bifold or hydraulic doors provide a gain in interior space, while providing the convenience of remote door openers? How does the price compare to regular overhead residential doors?


I am evaluating doors for a residential project. Would like to get information on the use of a hydraulic door that is designed to hold glass. The idea is to maximize incoming light and also maximize the outside coverage when the door is up. Would appreciate any feedback, direction you can give me. Regards


We are looking for a residential door that will be placed in one exterior wall of our floating home. It would be 7'tall by 10' wide. We want it to look similar to a glass paneled garage door (maybe three columns and three rows?) but to pivot up (a one-piece hydraulic designer style door). Could you please give us a quote for this? Thank you


We are adding a 12 x 24 foot screened porch and want glass wall hydraulic doors that retract upward with electric openers. We only use this home in the summer so insulation is not important, we just want to keep the weather out. Thanks


Hi - I am interested in all glass residental hydraulic door similar to the ones on your website pictures. Size opening is 33' by 10' please quote me for 1 big door or 2 side by side with motor and all accessories. Thank you


Hi, We're interested in using one of your hydraulic doors for a residential project that is under construction now. The opening is 8'x8'. Do you have any CAD drawings of the head, jamb, and sill details? If so, will you please send it to my email: Thank you very much.


I would like to inquire about a hydraulic door for my new garage (residental). The garage door opening is ~40' wide x ~10' tall. My new garage is located in MT but I currently live overseas in Africa. As such, I wish to be contacted by a customer service representative via e-mail. Note that I state below the building is wood but the walls are LOGIX concrete blocks and the header is wood. Thanks


Do you guys do residential? We have two 8x7 (approx) garage doors that we don't want to have open to the inside. Is the hydraulic an option? Need good insulation for Boston area as well. Thanks in advance.


Do you have a hydraulic garage door that would work for a residential garage? It would not need to be opened electronically, as we are using the front of our garage for storage and are building a wall about 3 feet inside the garage door. We don't want a standard door because it would interfere with the wall when it opens up. Please provide a quote for a basic residential hydraulic door that would be 8 by 10 feet.