220: FULL SWING HYDRAULIC DOORS

1

I need a quote for furnishing and installing eight (8) each 48' x 14' swing hangar doors with 3' walk door. Project is in Greensboro, GA.

2

We have a customer that has a restaurant with (2) 16' x 7' openings. He can't have a traditional overhead door because he has lighting and ceiling fans on the inside of the opening that he does not want covered up. He is looking for a full swing hydraulic door option that opens outward. He wants it to be full view glass.

3

I HAVE A SHOP AND WAS INTERESTED IN A FULL SWING HYDRAULIC DOOR THE OPENING IS 115" HIGH BY 119" WIDE ABOUT THANKS JOE

4

Aircraft building, New construction. Building size 50' x 50' x 18' tall. What are my options to install a full swing hydraulic door and frame requirements? Plus approx price range in looking at. Thanks, Ivan.

5

Need to get a quote please on one full-swing hydraulic door with impact glass if you carry that. Non-impact if you don't. Thanks

6

Looking for a custom fullswing hydraulic door 8 feet high by 10 feet long. Needs to be made out of aluminum and look like a garage door. Please get back with me asap. Thank you

7

Please quote 20'x18' clear full swing hydraulic door installed complete. Please quote as separate option free standing header. Also, I would like an option for an internal truss door. This door is going on a RV park recreation building. Please send design/engineering documents to be able to send to Butler for custom quote. Thanks

8

Please email as I do not have my phone with me all the time. I am looking for a general price for a 40' 14' tall fullswing hydraulic door for a shop that I am about to build. I know the quote is not going to be exact but I would like to know approximately what something like this might cost. The shop will be located about 45 min SE of Oklahoma City. Thanks.

9

I am building a quonset barn and would like to put two full swing hydraulic doors on both ends. We are planning on 15' wide x 12' tall doors. Please send me a quote.

10

I'm building a ICF hanger, I want a fullswing hydraulic door. Concrete with foam insulation. Wondering how to attach supports to wall. What would the lateral load on the wall be? Do you have a PDF installation manual available for review? And of course, the procurement estimate. Thanks, Jack PS: Email response would be the best route.

11

We have one of your full swing hydraulic hangar doors to install in Fort St. John British Columbia. it is a 70' x 20', would it be possible to email me a complete installation manual. is it recommended that the entire door be assembled on the ground and hoisted into place in one peace, or can it be hung on the building in 2 sections can connected together from there? Thanks,  Ronny, Commercial Sales Manager

12

We have been retained by the Beach Mosquito Control District in Panama City Beach, Florida to design their new District Headquarters Facility and they have need for a Helicopter Hangar Building; we are currently evaluating the hangar door options and the pros/cons of a bi-fold vs. a full-swing hydraulic lift door. Please have someone contact me to review this information. Thanks

13

Hello. I am an architect in Ft. Worth, TX. I've got a residential garage that needs two 6'x7' full swing hydraulic doors. Do you supply doors as well as pumps or just the pumps? Thank you. Mildred

14

Please do not call me yet. I am looking for a quote for a fullswing hydraulic doors only to be mailed to me. To be installed on one end of a new to be built wooden pole barn with metal siding. The outer skin of the garage door would match the barn. What kind of electric voltage requirements would be necessary for the pumps?? Thank You

15

I'm looking for a full-swing glass hydraulic door approximately 10' wide x 10' high. It's for a modern lobby entrance in an existing concrete tilt-up building. We are basically replacing the existing roll-up warehouse doors with these glass hydraulic canopy doors. WE are currently in the CD phase of our plans and the client is requesting a sectional garage door with glass, but your doors look much better and I don't have to have those ugly rails coming into the building. I am concerned about noise as we are right under LAX airport glide path, (were less than a mile from the airport. If someone could call me I can give more info as well as a progress set of plans for your review. Thank you.

16

I have a t-hangar at the airport in Billings, MT (KBIL) and would like to get a quote on one of your full swing hydraulic doors. Construction is wood frame with metal siding. The clear opening is 471.5" wide x 143.75" high. Across the top is a glue-lam header that is 2'3" tall. Several of the other hangars have Schweiss doors so that might help you quote if you have questions.

17

Can a 17 foot full swing hydraulic door fit into a building with 18 foot sidewalls?

18

We are moving into existing building need to fill in an existing 10'-0'' wide x 12'-0'' tall with a fullswing hydraulic door. All glass ( Less Framing ) would be preferable as it is a large meeting room with NO borrowed light except for this door. Call me please. Do you furnish the glass or do we ? Balance of glass in building is Viracon Do you finish or do we -- It would be standard " Bone White " Thanks - Tony

19

Trying to figure cost of a full swing hydraulic door for a 50x100x20 metal building our company is building. I there any way you can quote me on a 17' tall x 40' wide hydraulic door.

20

We are an architectural firm and we would like to specify a full swing hydraulic door for a commercial job in Philadelphia. Please contact me asap . Thank you.

21

Good morning, I'm an architect in Cambridge, MA and working on a project in Beverly, MA that could use your full swing hydraulic door. We have a common service area that is situated between two buildings with a dining area near the large service door. We want to clad the door in a fiber cement panel to blend it with the surrounding wall. Your product looks like a good fit! When you call, could you have a price for the door as described below? Thanks! -Raymond

22

We have a project that needs two (2) 50' wide x 23' high fullswing hydraulic doors. The project is located in Fairless Hills, Bucks County, PA. Thank you

23

For 2018 budget I need an approximate cost for a full-swing door 80 feet wide and 20 feet high Send, call or e-mail list of options available. Bart, Airport Manager

24

Looking to create a custom millwork fullswing hydraulic door design in lieu of traditional roll down/garage doors within a commercial interior renovation.

25

Hello I would like to replace my small patio door with a hydraulic full swing door. Can you please provide me a quote thank you

26

Hello, We have one of your full-swing hydraulic doors at our Newhall Community center, and we are looking for a tech serving our area. Please advise Brent

27

Looking for a price on a full-swing one-piece door for a machine shed Existing building had sliders, Going in gable end of building 28x16 opening would like to keep that size opening. Also do you install ?

28

I'm building 4 T-hangar buildings and will need 4 36x12 fullswing hydraulic hangar doors. The building will be powered by a 110v off grid power system in the 10kw range as no city power is available . It will be supplemented with wind and solar and have a battery storage bank with inverter ....What I need to know is the power requirement to operate each door. I.E. Starting amps. watts and volts to fine tune power requirements. Thank you. Paul

29

I'd like to price a full swing hydraulic garage door made out of glass and aluminum or steel. I am already in the process of building the structure and it will be ready for the door soon. Sincerely Darla

30

Planning a hanger at St. George Airport (84770). Current door finished opening is 60' X 16' Looking for pricing of full swing one piece type door. Will consider your opinion of hydraulic door as well. Thanks

31

Interested to find out if you have full swing hydraulic doors for residential applications. 8-10 feet total opening height. Thanks!

32

I need your Schweiss designer door 11m w x 4m high for 1set. We want to explore your beautiful full swing hydraulic doors in Korea. Thanks JJ