49: DOOR BIDS

1

Your bi-fold doors were specified for a project we are bidding. Trying to get a quote for the doors and potential installer recommendations.

2

I have a quote from Jeremy Rienke on a 40x12 bifold door and was wondering if I could get his email? I dont see it on the quote.

3

I am looking to put a bifold door on my new shop. I need a quote for a 12x12 bifold.

4

Looking to get a basic quote for a 60’wx20’h bi-fold door.

5

We are looking to put in a 70x18 bifold door in Lexington and are in need of a quote.

6

Need door loading information so I can perform my initial building design for the quote. My builder will need door pricing so I'll forward your proposal/pricing along.

7

I got an exploratory bid from Schweiss Doors in Sept 2021. I was very impressed with the detail of the quote and the important design considerations. I'm still hoping to get this done in 2024, and would like to see an installation manual to determine if I can do it with my own crew or whether I need your person to help. I assume the quote needs to be revised and made current, but first I'd just like the install manual to determine next steps. I'll submit a new quote request once I am certain of the exact dimensions. Thanks!

8

Looking for a door. 36x48 x 14 foot tall building. Looking for a price on a door.

9

Hello folks, I'm looking for a quote on a 18' tall by 25' wide door I'd like it quote as a bi-fold and as a hydraulic. could you please contact me with any questions.

10

Would like to understand the cost delta between a 40ftx10ft, 40ftx12ft, and a 50ftx12ft door.

11

We are desinging a storage warehouse for a building in Huntsville alabama. The door opening is to be 36' wide x 16' high. Can we get a ROM cost estimate for what this door would cost plus installation costs?

12

Hello - can you provide a cut sheet and budget price on a 60foot wide x 24' clear bifold door going to upstate Maine. this will be installing into a new proposed Varco Pruden building

13

I need a 42' wide by 10' tall bifold door. Do you install or do you have a rep/contractor in Austin to recommend? Approximately how much to install? Looking for all in cost.

14

Need a quote for 55' w X 14' Clear high Bi-Fold door. Going in a steel building with 18' eave height. Auto latch opt.

15

Obtained a quote last year - Bid 4422-MG Found a local installer to do the job. I have the specs you sent but cannot locate the original bid. Of course I would want the installer to confirm measurements, etc. and contact you directly as he has installed many of your doors.

16

I’m interested in 30x 16 doors and would also like to compare that to making the opening a little wider for a 40x16 door on one end.

17

Looking for a bi-fold door opening 15' and 45' wide. Can you give me a price delivered to Roosevelt Utah, 84066 with the standard bottom drive and manual latches.

18

I would like to reprice a door. I am quoting a job I did in 2018. Looks like the same job.

19

Looking for a price and lead time for a 30' wide bi-fold door with a walk through service door with an opening height of 14'. Thanks

20

I need a price on a 40'x20' bifold door. Please contact me so we can go over options. Thanks, Craig

21

I'm looking for quote on a 15x50 bi fold, lift straps, auto latches, insulated.

22

Price for a bi-fold and swing door the measurements is 32ft wide 15 foot tall. We would like a quote for the build your own door kit for the by-fold and swing door for the same measurements as well

23

Also need two 24-0 x 18-0 bi-folds on the same side wall which is the high side of a Mono slope roof.

24

Jeremy Rieke, Please update quote to 20 bi-fold hanger doors from 12-12-22. I apologize for the confusion (2). What problems present themselves if the stub column height is 6"? Thank you for you time. Yours truly, Stuart

25

I would like a quote for a one piece hydraulic door. 40’ long and 12’ high Thanks

26

I have three large barn doors that need replacement with either hydraulic or bi-fold type doors. Can Schweiss provide me a quote and lead times for your doors.

27

I had a fire and lost my whole hanger. For insurance I need a quote. The door I purchased from you was 36' wide by 10' high using cables and a opener. Thank you for your help. Dan

28

Carlisle Construction would like to invite Schweiss Doors to bid the ST CLAIR COUNTY AIRPORT T-HANGAR project. This project is NEW CONSTRUCTION. In your Proposal, please identify your DBE status, if applicable. Also, please I provide your proposal according to the bid form in the Sharepoint Link Prime Bid Date: 10/11/2022 @ 2:30PM CT Sub Bid Date: 10/10/2022 5:00PM (please have written scopes submitted, even if you are waiting on vendor pricing) RFI Deadline: 10/7/2022 @ 10AM Documents St. Clair Co. Airport T-Hangar Please provide a Proposal for: 1. Supply Bi-Fold Doors and Hydraulic Doors 2. Erection Price (if applicable) Please provide all requested unit prices. Thank you!

29

I talked to some of your guys at Oshkosh and need to change a few things to get a better quote? OLD BID IS 4522bp Height 15 foot 2 inches - this is from floor to existing header -idth - existing frame to existing frame - 56 foot 0 inches Plan is to remove the rolling doors and put hydraulic door on- so frame is existing. Please revise plans as well as price

30

Hello, could I get an estimate to replace your competitior's doors- currently 3 60x22 bifold doors on our hangars in Sioux City?

31

I am looking to quote a 13 or 14 X 48 foot hangar door using your company. We are currently comparing prices / delivery on a new hangar project in Texas. We anticipate starting the project in about 90 days. We will provide 5 inch concrete base and an opening for the door. Please specify what power or building structural requirements are required for door fitment. We may be interested in your Build your own door option as well for economy since we have our own welder available. Please quote costs, freight, tax, and timeframe for production and delivery. I appreciate your help. - Bill

32

I will be building a new steel hangar that will be 60 feet wide. How wide of a bi-fold door will work? About 54 max? What will the cost be for a 54x18 opening with straps and insulation panels? I don't yet have the final plans and permits, so I realize prices may change. I need good estimates before breaking ground. Thanks!

33

24ft wide by 14ft tall. Exact measurements are the opening size. The door is going on a red iron weld up shop.

34

Interested in schweiss doors either a bi-fold door with lift straps or a one-piece hydraulic door for a garage approximately 14' high x 24' wide.

35

I was wanting to get a price on 30x18 Hydraulic flush mount Door with installation in Moulten, Iowa, depending on price, please quote your bifold strap door as well in the same dimensions.

36

Looking to get an estimate for a 44' X 12' electric Bi-Fold door complete and ready to install for a new hanger build in Southern California. I would like three 2' x 3' windows in the upper section of the door and a walk door. Need a quote including shipping to Blackinton Airport in Valley Center CA. Thanks

37

We are in the process of ordering the building and I need to know the difference steel tube or I Beam construction makes on the price of your bi fold doors. How do I get a bifold Liftstrap door quote for windows, doors, and other options listed on your quote sheet?

38

Hello, Looking for pricing and avail to Bend Oregon (KBDN Field) for 60' wide 16' tall clear height fast opening low maintenance door. Interested in both bi fold or single swing door. Thanks Jason Bethers 541.788.4868

39

Please send email with pricing on bifold strap door described. I will call your provided contact when I have reviewed the quote. Please provide delivery interval with pricing on remote opener and auto latches and the name of a local installer in the Austin Texas area. Thanks. Derek King.

40

Would like a price quote for a bi-fold fishing cabin door. 14ft by 14ft opening. Depending on shipping cost can pick up the door at your facility

41

Trying to get the costs to build a hanger near Jefferson NC 28684 Need a quote on a 3 bifold hangar door options. Bi-fold doors. 1. Door 40'X 12' 2. Door 47 X 12' 3. Door 40 X 14' Thanks Darrell Johnston

42

Need a local rep to contact me regarding a quote for 2 Schweiss, 65x20 Bi-Fold doors for 2 Hangers @ Lake Charles Regional Airport. Include pricing for windows, walk doors and remote openers as well as auto latches.

43

Hi, We would like a quote for a Schweiss bifold all-steel door frame 30 wide x 20 high. Email or text preferred. Thanks Rick

44

Please call me at your soonest opportunity. I would like to identify the correct bifold door product and pricing for a concept building price proposal. Thanks very much.

45

I’ve got two approximately 12’ W x 10’ tall openings on the wave side of my building where roll up doors are not an option. I already have a header at 11’ high above each opening. Was wondering what the cost of a bifold strap door option mounted on the outside of my building would be here as I don’t have the internal headroom for roll up doors. Matt

46

Would like to get a quote on a bifold lift strap and hydraulic door. The opening for the door is 46' X 12'. I would also like to know if the door is self supporting or would additional structer to the building be required. What do you have for a backup system in case of a power outage?

47

45x12 clear bifold door with weather seal kit, cable auto latches. Please include labor to install. We are close to your factory, can we pick up the door to speed up the process of delivery? Please send design specifications for Butler.

48

We just emailed for a quote from chris@spectrumairways.com, but also requesting this way. We require a 19ft door, bifold with auto latches. We can't lose any headroom and very little side to side room.

49

I need to get a quote on (1) 40-0 x 14-4 Hydraulic or Strap Bi-Fold Door. Right now this is a budget, so we do not have any specs. I do have a few drawings, but not many. Looking for standard options at this point, but will like windows on the bifold for sure.

50

Dear Sirs, Can you please advise where to send a request for quotation for some strap motors for a project we are tendering for now. The project is a prestigious project in Abu Dhabi, UAE. that will require your best designer bifold doors. The total amount of doors that we are requesting strap motors / or other as you advise is 15 Doors. Door size varies from 4m x 6.5m to 6m x 7.5m . Would appreciate if you can send me the email of the person in charge so i will forward the necessary drawings and RFQ. regards, Joseph Skaff Technical Director

51

What’s the ballpark cost for a replacement for a standard garage door? Mine is 15’x7’. I'm considering either your hydraulic one piece door or your bifold garage door. The kind with Liftstraps. Will also want two windows.

52

I have a customer looking for a 30x14 hydraulic or bifold strap door This is a new construction job

53

looking for a price on a bifold strap door with auto latches, 50'x 16'8" (17' sidewall ) with remote and lift straps. 2 windows in the lower panel. You did one for me at GPZ in 1997 or 1998 I think. This would be for next spring or summer installation. Thanks, Rusty

54

Good morning, I'm curious if there's a price calculator to get a rough idea as to how much a bifold Liftstrap hangar home door would cost? I'm trying to create an estimate for a home build where I'd like to integrate a t-hangar into the floor plan, and then a separate hangar shortly thereafter. Trying to get an idea of how much doors cost, what options are available, etc.

55

I don't need a phone call if you can provide a budget and construction details. Otherwise please call . . . . Please provide a budget for a bifold strap door or hydraulic door: 12.00 ft clear height 42.00 ft clear width Please provide details for attaching the door to steel framing walls. Please provide details for attaching the door to concrete block wall framing.

56

Please quote 2 each 62 x 18 Strap Lift Bifold Doors with auto latches, and freight to Lewiston, ID

57

Can I get a quote for the following bifold strap doors Quatity - width x height 3 - 60 x 20 2 - 55 x 20 1 - 50 x 18 4 - 45 x 16 2 - 40 x 16. These are all hangar doors and we will be wanting windows and remote openers.

58

Need approximate price as soon as possible, please. Door needs to be 16 feet high and 50 feet wide. I like the heavy duty hinged bifold strap doors Thanks Chris

59

Looking for a quote for a 22'-0 x 12'-0 bi-fold door with lift straps and remote opener. please quote B.Y.O.D. if that's possible

60

Hello, I am interested in getting pricing for a 14 ft. x 10 ft. (or a similar standard size) custom made bifold liftstrap door to accomplish a slightly smaller version of the project in the attached link. Thank you, Shane Murphy

61

Contractor requested quote for - Okoboji bifold door project They referenced your quote #32321 RD Thanks much, cell is best 605 360 7962 if need be otherwise email is best

62

We have have dealt with Jeremy Rieke previously. Building is a 70'x50' with the 58' x 12' door at the endwall. Need an update quote since the last one given a year ago. This is for a lift strap auto strap latching door.

63

AM WANTING TO USE 1 HYD. UNIT ON 3 DOORS, MAY BE CHEAPER TO USE UNIT FOR EACH DOOR. ALSO GIVE ME QUOTE ON THREE BIFOLD DOORS, EACH DOOR WILL BE 30 FT. X 14 FT.

64

I need a quote for 1- bifold Liftstrap door 40' wide x 10' tall with sheeting material with insulation with power operator with shipping fees thank you

65

I looking for a quote for two bifold strap door’s one on end wall and one on side wall. 30’wide x 18’ Tall. Also include prices for windows and remotes.

66

What would be the price on a bifold strap door with the dimensions of 20 ft wide by 13ft 6 in tall? Bifold door should also be equipped with a backup system and remote opener and three windows.

67

Good Day I have a spec for one of your doors. strap lift 192" x 120" solid panel. I am looking for a place holder price in my budget for this door that will be installed next year.

68

Please send quotes for 14'H X 54'W and 12'H X 54'W for both bi-fold with electric lift, and one piece w/hydraulic lift. Also, add prices for windows and remote openers Thanks, David Jackson

69

An invitation to bid was forwarded to schweiss@schweissdoors.com containing drop-box links to plan set and specifications Please call if you have any questions on these bifold strap doors or require any forther information Thank you Alan Montgomery Allbrite Construction San Antonio, Texas 210-490-6495

70

We are quoting the Western Region Bifold Liftstrap Hanger Door for OSF St. Mary's Medical Center - Galesburg, IL. I can send you the specs. and drawings if you would please provide an email address. This is short notice but the bid is due Friday,. Please feel free to call me at (309) 275-8257 to discuss this project. Thank you! Jeff Labuz - DH Pace

71

I need pricing information for a 50x14 bifold door and a 50x12' bifold door to zip code 76087. Both are strap doors with auto locks.

72

Hello We have a client that is looking for an installed price for a 70' x 18' BiFold strap door. Also, how far out are you on delivery for both styles of doors?

73

Can you please give us a quote with the weight and cost of the bifold Liftstrap door and the cost of shipping to Saskatchewan, Canada please? Please quote separately for: 30’ x 14’ 30’ x 16’ with remote opener. Thanks

74

I am working on a building quote and need specs for a bifold Liftstrap commercial grade hospital glazed door. Could you provide thanks

75

I would like a quote for a 40' X 12" bifold or one piece hydraulic lift hangar door installed. Wood pole steel sided hangar. I have an old steel bifold electric door from another company now that will need to be removed and disposed of. Thanks!

76

Pls give me a quote for a 46’x14’ (need 14’ opening height ) bi-fold strap door shipped to KARV 54548. What is the timeframe/ lead time and what is the cost to have the bifold door with remote opener?. Thanks

77

I'm developing an air service near Wassila Alaska. I have a bid for a mental building hanger with an aircraft door opening of 40X14. I'm interested in a bid for both a bi-fold liftstrap canopy door and a hydraulic canopy door. Both must be insulated. The timeframe is summer 2022 but I need a bid now for financing discussions and a business plan. I understand that the price may change by next year. If there are questions a phone call would be fine.

78

would like a representative to visit on making a door in existing building before cutting out door would want door and installation quote that will include liftstraps and a reliable backup system.

79

Dear Schweiss: I asked for a quote from you back in 1918 but due to unforeseen circumstances I had to chance my plans. The quote ID was Schweiss Door Bid 2118-CR. If you still have it in your files? I would like a current bid please but for only one door using liftstraps now instead of cables on the original bid. Thanks Norm P.S. You can call but I may have to return your call.

80

Please quote one 80x20 clear bifold liftstrap/autolatch door with remote openers installed Please quote one 62x20 clear bifold door with lift straps,

81

I want to price a 13 ft tall by 30 ft wide bifold strap

82

I am quoting the building for Mesco and I need bifold liftstrap door information only. The building is for Rock Branch Ironworks and will deliver to Baldwin, IL.

83

I have four doors: 2 10' wide x 8'high bifold, 1 10'wide x 8'high one piece hydraulic and this door indicated below. I would love to work with you on ordering a bifold liftstrap door with remotes and glass cladding, I just don't know the price. Thank you.

84

Interested in range of prices for fold up bifold strap door or wall ... opening is 18' wide by 10' tall.

85

Interested in stand-alone hydraulic swing or bifold liftstrap door pricing. 40’ opening by 11’ height.

86

Would like prices and details of how to cover top bifold door (Hinge) area so as to blend with the above finishes. Quote for: 1- 14 x 14 door 1- 10 x 10 door We will have 2 doors side by side. For proper look, would it be better to have the 10 x 10 door 10 x 14? Price difference?

87

Please text me first at 610-844-7917 before you call. Need pricing on a Bifold Fabric Door, 89'-3" wide x 75'-6" high for new building. Thanks

88

I need to get a quote for the rebuild of my garage by a developer that destroyed it. I have architectural drawings that they sent but they do not include your bifold designer strap doors. I specifically liked a residential size version of the link below. How do I get a quote?

89

Hi, Please quote including shipping to the UK for a BYOD kit which includes the hydraulic pack, rams and hinges for a 38’ x 10’ door. Could you also quote me a bifold strap door in this same size?

90

Please quote 45x14 clear bifold door with strap lift including installation. Include weather seal kit, battery backup and auto latches. This will be at the Lakeville Airport in Minnesota. Please send design information so I can send to Butler please Thanks

91

Good Day, I would like to request for a quotation for a 30m wide by 7m high clear opening bi-fold door with lift straps to be shipped to Port Elizabeth. Also, can you provide me with the overall weight of the door and the structural implications in terms of top beams and side columns for the guide rails. Looking forward for your prompt reply. Kind regards.

92

I was wondering the rough cost of a bifold liftstrap/autolatch hangar door with 3 sets of windows each: measuring 40 feet wide x 14 feet high?

93

I am looking for some rough estimates for a strap lift door package. Not sure what comes with it or anything. I think it would be roughly 55' wide by 10-12' depending on needed head room. It would be on a new construction so I would need some details as to how to have the end wall built, it would be a steel building. I assume my metal guys could do the install and would supply the metal siding and insulation? Thanks, Andre

94

I have (3) 10' X 10' overhead garage doors I am interested in getting a quote on your bifold door liftstrap and auto latch hardware options. Thank You. Nat Zio

95

Looking for a quote on two 50x18 bifold doors. I would like to know the price difference between the old cable style and the strap doors. Also would be interested in seeing the price on the hydraulic style for the same size. I've heard that lift straps are the only way to go, but I'm concerned about how much they will cost.

96

I need a quote of a 40'-0" x 20'-0" BiFold strap door in the endwall. Side columns are I-beams. Also quote a couple of windows and a remote.

97

We are building an equipment shed and require a overhead bifold lifting strap door 24’-26’ x 12.6’. Please give us a quote. We are on Vancouver Island BC Canada

98

Residential Applications for a bifold liftstrap garage door and/or a Schweiss one-piece hydraulic. Approximate cost to

99

Looking to install a bi-fold liftstrap designer style door at the back of my house (~8'x10'-15'). Wall is currently CMU masonry. Interested in finding out: 1. Standard sizing (I can be flexible with the size of the door, would prefer to do a standard size to save on costs) 2. Finish Options (Glass, metal, motor...) 3. Lead time 4. Approx cost

100

I have a 77' wide opening by 13'6" tall, and I am looking to put two bi-folding doors in this opening. I could use a quote on a bifold strap door with installation included

101

Wondering a price on 32×16 ft bifold liftstrap canopy door. Could someone please contact me when they can?

102

Hello, I had been in contact with Julie Schafer, 4 years ago, about a pair of bifold doors for an implement shed on our farm. She had sent me a bid, but at the time, I wasn't able to make it happen. I was hoping I could get a current bid, but this time with lift straps and an auto latch system. If possible, could I also get an installed price with that? Or do you have a crew to do the installations? The building was designed and built with intentions of a hydraulic door at each end, we're just slow at getting them put on.

103

I need pricing on automatic door latches for two bifold hangar doors. I am sick of fighting people who don't remember to open the manual latches.

104

Hello, I am a salesmen for Strat-O-Span Buildings, Inc. and Mark the owner here said he has pointed some of our past customers to you. I have a customer in Germantown, IL who would like a price on a self supporting hydraulic door as well as a standard bi fold liftstrap door shipped to him. The opening is 35' wide and 16' tall. Let me know if you have any questions. Thanks Matt Stratmann

105

Trying to get a high level idea of price increase to go with a hydraulic one piece and bifold door price vs a roll up. Building has not been engineered yet. From what I understand, the price difference isn't all that much and with a Schweiss door I could get much more door for nearly the same price.

106

Looking for a quote on an airplane hangar door. 2 piece plenum swing door w/motor, total opening 75'w 30h, each leaf 30x37-1/2 insulated. I know there are a lot more details that you need but I would just assume medium features and operations. In other words middle of the road liftstrap bifold options. If you were able to quote this it would be optimal for myself to have it by 5/12 around midday. If that is not possible I can still in later phases of development use your company information and quote. Thank you.

107

Have a customer wanting ACI to Supply an Opening for a Bi-Fold Liftstrap/Autolatch Door With a 72'-3" clear x 17'-2"clear Door Opening in Right End wall of a 100'-0" wide x 175'-0" long Equipment Building. Knowing Schweiss Doors after having used them in several of our projects over the years I Know this is the way he needs to go. Could I Get a Quote and loads for this door and try and convince him to go with Schweiss? He was looking at Hi-fold but has not committed to them at this time. Code will be IBC 2015 with 115 MPH Wind Loads, 10 # ground Snow, With an Enclosed Building Condition, Seismic Site Class D, Suburban Or Wooded Terrain Category With Normal Building Occupancy (2) . CER

108

I received a bifold door quote from you but my measurements are off and I would like to get the quote a little closer to acurate before I send to my architect. I am looking for the same window system as you created for DOC's Fresh Kitchen. I found the link after I submitted the first quote last night. DOCs is exactly what I am looking for but I need it at a good price. the entire width of store front is 12'7" from column to column and 7'11" tall. I would like the opening to start between 40-45 inches from the bottom. I am flexible here hoping to save money using some standard sizing if there is such a thing in your industry.

109

I'm looking for initial budgeting numbers for 4-5 hangars at KTWF with 40' x14' doors. The proposed construction would be concrete tilt-up. I would like to to learn about initial and long-term maintenance costs with both hydrauic and bi-fold strap doors. Are there any local installers? Email is definitely the best way to contact me. Thank you!

110

Pricing for insulated bifold strap doors. 45 x 16 45 x 18 50 x 16 50 x 18 55 x 18 60 x 18. Add price for shipping and installation in Wisconsin.

111

To save both of us time, can you give me the weight and price on a 45x18' bifold liftstrap door with auto latching system. White. Thank you.

112

Can you provide bi-fold custom door prices please, 36ft wide x 25ft high, no windows, 2" thk insulated metal panel exterior. 4 required 16ft wide x 18ft high, no windows, 2" thk insulated metal panel exterior. 2 required We are in the planning stage

113

Just trying to get some rough pricing. Clear anodized aluminum with clear tempered glass. This is for a residence. Automatic operation. Can you price this for both the hydraulic and bifold door styles?

114

Do bifold liftstrap Schweiss doors come in standard sizes? Would like quotes for standard sizes starting at 44' to 60' if possible. Thank you

115

I am interested in your bifold liftstrap and hydraulic one-piece designer doors and would like some information and price on the door size 34' X 9'. Is there a dealer a dealer in Canada? Trust I will hear from you shortly

116

would like some $ value for strap bifold door 40 ft long 11ft high building hanger this fall may put floor in next with door. Could you also detail costs for Schweiss auto liftstrap/autolatch system and remote hangar door openers.

117

Quote and specs (weight) for your lightest heavy-duty bifold strap door to span an openning of 40ft x 11ft.

118

We are bidding a hangar building in Wasilla, AK. The building size is 40ft long 48ft wide with 15ft tall walls. Please let us know what more information we can send you to get your data sheet with reactions for our engineer. Thank you, Sara

119

I am biding on a project that has 60'x16' Aviation doors in it. The customer only wants your product in their building. Please email me so I have your email and I can send all the info that I have at this time. Thank you. Jake

120

I am bidding a project at a Technical College - AG Center Barn & Classroom Additions located in WI. This project has (2) BiFold Hangar Doors. (1) door is 26' wide by 14' high, and the other is 12' wide by 14' high. This project bids Oct. 2nd.

121

A request is being made for a quotation to furnish a F.O.B. Dock in Honolulu. We are accepting bids for a hydraulic one-piece door that is 88' wide by 28'-6" high for Air Service in Hawaii per drawings dated 8-10-17. The design include 24 gauge pre-finished R-Panels. The drawing shows 17 hinges welded to a portal frame with W12x252 columns and W30x116 header beam. Project bid date is 8-28-17. Thanks, Rupert C.

122

I am bidding a Ft. Pickett Unmanned Aircraft Facility, it will need 2 lift-strap bi-fold hangar doors. One that will be 40' wide x 15' tall and one that will be 25' wide x 12' tall. The project is in Blackstone, VA.

123

I have a customer bidding on a hanger project and they would like us to bid on a Bi-fold Hangar door for them. Can I get a price on a 80' wide x 22' high Schweiss lift-strap bi-fold door that comes with a motor. Please let me know if any other info is required.  Thank you, Eric

124

I am bidding a job at an Army Airfield in Virgina. There are two bi-fold hangar doors on the project and I would like to use Schweiss' lift-strap doors for them. I can send drawings and specifications if this is something you all can give me a $ on.

125

I am bidding a project for a customer who is wanting an airplane hanger with an office area. I would like for you to send me two or three different quotes for a 70'x16' door. The customer is not sure want he wants so I would like to give him some details on either a one-piece hydraulic door or a lift-strap bifold door. The metal building we are building is an 100'x100'x20' tall. If you need any more information please contact me and I will be glad to help. Thank you for your time and I am looking forward to your quote.

126

Good Afternoon, we will be bidding the new construction of 2 Schools on July 13, 2017. These schools are in the same contract and are identical. The project requires Vertical Bi Fold doors that we need you to quote. I have attached the specifications for your review. The rest of the drawings and specifications can be emailed to you. Please help us out and quote this work please.

127

I am looking for a bid for my shop building. I have a 14' tall opening x 30' wide. I also need installers to check the structure for installation requirements. Thanks, Carl S.

128

I'm trying to get pricing on a Schweiss Bifold kinetic architectural system Gate. Please email me an email address for someone in sales I can communicate with on this. 

129

We are getting ready to build an auditorium this coming summer. The idea of a Schweiss bifolding wall that opened to make the space even bigger was brought up. I know its impossible to throw out a price until size/materials/design is known, but I'm trying to figure if its even an option for us. What range would a bi-fold door roughly 30 wide by 20 tall be? 

130

Need your price on an 18' x 8' strap system bifold, glazed and same size in hydraulic glazed door to NM. structure is wood but could be steel, if necessary you guys can specify side column material.  thanks 

131

I need to get a Schweiss hydraulic door quote on a project that we are bidding in AL. The opening is glazed with five lites wide on the bottom half and five lites wide by two lites high on the top half.

132

Hello, I am looking for a price on the following 1 - 36' x 18' bi-fold door strap latch door or a hydraulic one piece door.  I do not have any experience with these doors but require pricing on a project near Mpls., MN. Please contact me for any further information required. thanks

133

just want to see if your hydraulic door price is competitive with roll up door I priced in TN? Please quote installed and door only. Thanks, email only, NO PHONE CALLS!

134

We are providing a labor quote to a Contractor from Bedford,PA. for a hydraulic hangar door at the Airport in Johnstown, PA. - Can someone please call my cell

135

I got a bid in Feb this year, is this quote still good. I also need another hydraulic door quote opening width is 50' 10" clear opening Ht is 11' 7" options: man door right side. 2 windows approx 24'H X 48" W This will need an exterior Truss to hang it on as well, do you design them? This is an existing hangar. wood frame. do you also build them and will it ship with door in components? I could also build it. If you have the hi-lift arms, the truss could be 20 inches high. would I get a discount if ordering both hydraulic doors going to KY? 

136

I saw the pictures of the project you work on Oshawa airport, we are interested on starting a small project of the same kind, whit 6 to seven T-hangars to start for small planes, so 2 thing, do you just sell the doors and not the building? Searching for the best option for the price, so if you can point in the right direction and of course we want your bifold strat doors or hydraulic one piece aviation doors  over here the planes that we are trying to accommodate are aprox 13 meters wing span and 9 meters long, 3 meters tall, thank you

137

I will need Restaurant bifold and hydraulic door  quoted with glass and without glass. Bifold quote should be with liftstraps. PLEASE give me a call or send me an email asap.

138

We are bidding a project in Sedgwick, Kansas that has Schweiss vertical bi-fold strap doors specified. I would appreciate a quote if you have the information. Thank you.

139

I'm doing a feasibility study right now, purchase is NOT imminent. Just trying to see what the hangar I want will cost, and see if there is a way to get one of your Schweiss bifold strap doors on it in the 38 ft. wide x 16 ft. tall range. Can I get a ballpark figure?

140

I got a quote from you in April 2013. 112312-CR. I'd like to update it and make a decision. The actual bifold door horizontal dimension will be 31'-5. Height will be 8'-4". The same features apply as per that quote. However, I'd like to now have liftstraps instead of cables and know if a remote is included or can be? I'd also like to know how the door arrives. In how many pieces, and what is involved in assembling and installing. Thanks.

141

I am interested in obtaining a quote for the following: Bi-fold Lifstrap model doors: Opening 7' height 9' wide end - Two Opening 14' height 12' wide end wall installation - One I will be covering the frame in wood myself. Please let me know if these dimensions will work with your door and how much height will be lost when the door is fully opened. 

142

Hi, Please provide me a price for the door specified below. This is one of your premier bifold liftstrap doors.  It will be shipped to Plymouth, CA. Thank you!

143

I need 40' x 13' clear please along with pricing send me the details for the bifold liftstrap door attachment. I want to make sure I have enough building priced to attach the doors to.

144

You gave me a bid in February. Please modify that to a 50' wide by 15' tall bifold door and make sure I asked for your bifold door with liftstraps and autolatches.

145

I work with Building Systems in Sioux Falls, SD. I put down all the information I could, you can just email me with the bifold liftstrap door quote and I would really appreciate it. Thank you so much, Suzannah

146

 I would like to get an updated bid please with shipment to Wasilla, Alaska. I am ready to order my bifold liftstrap door. Thank You Michael       

147

You may have provided a bid for these doors already if you sent it to Construction firm in Sisters Oregon. We have been asked to bid a complete package to them. Let me know if you need info on the four bifold strap doors they want. Thanks

148

We are quoting 2 Schweiss bifold liftstrap aeronautical hanger doors 42' x 14 with remote door  entry (1) option 2: 50' x 14 with remote door entry. 3070 walk doors.         

149

Looking for quotes on slider hangar home door replacement using your Schweiss bifold strap door. Just need ballpark $$$ to plan for three new hangar home doors.

150

Another brand door owner wanting to upgrade to your patented Schweiss liftstrap system. We have a 50' X 15' 5-cable door installed around 1980. Door blueprints are available. Would like to know if this door conversion is possible and estimated cost of straplift door conversion.

151

I am going to convert my old cable lift door to a Schweiss strap lift bifold. I was told to send in my serial no. of my door for a price quote. It's bifold door Model No. - S-13 No. 261 Serial No. 2649

152

I'm pricing a riding arena door for next year. What would a Schweiss bifold liftstrap / automatic latch electric opening door be for an opening 12' high and 20' wide? Wood building bifold door. 

153

I need a price on three each (3) bi-fold doors 38 feet  wide by 10 feet high, strap lift, one insulated walk through door on each door. Delivered. Immediate order. Door installation is to steel uprights and laminated 8.5 inches thick by 24 inches high wood beam. Door wood beam is recessed .5 inches.  

154

I REQUESTED A HYDRAULIC DOOR PRICE,  RECEIVED A QUOTE (102213HA) BUT I DID NOT COMMUNICATE WELL WHAT I NEED IS  A HYDRAULIC STEEL DOOR TO FIT A RO. THIS IS THE FRAMED DOOR OPENING SIZE NOT THE DOOR OPENING SIZE OF 40' X 10'-6 3/4". I ALSO DIDN'T ORIGINALLY RELAY THAT THE SCHWEISS DOOR WOULD HAVE (2) 3'X3' FRAMED OPENINGS AND PREPPED FOR INSIDE DOOR LINER. SORRY FOR THE TROUBLE. PLEASE REVISE ESTIMATE.

155

I had you quote Schweiss doors for a customer  weeks ago, since then the project size has changed, the semi truck door has gotten larger. Now it is a 70' wide x 20' high door. Previously it was 50' x 16'. Would like a revised quote on each, the bi-fold strap door and hydraulic truck door. 

156

I would like a existing steel door quote updated. Quote # is 111612 LC. Standard cable bifold door with option to install. Hoop barn door will now be 32 ft. wide.

157

Need price for hangar door and installation on 36'x19' hydraulic aircraft door. The door will go to El Paso, IL where you recently installed another bifold hangar shop door. His designer hangar window door is very impressive.

158

We got an older bid for a Schweiss BiFold industrial grade commercial door. Customer is  ready to build, I need an updated door quote. Note time frame for the door delivery to Texas.

159

I had spoken with a Schweiss Door rep earlier regarding pricing of (6) 50' x 18' clear bi-fold doors in North Dakota. There will be no man doors or windows in these doors. Please provide a revised  quote for (6) doors without man doors / windows.

160

Could you please change bifold steel door bid # 73113-RS from a 21' framed opening to a 18' framed opening. Don't need as much door or headroom  clearance as I first thought. These are the emergency ambulance and rescue doors.

161

I need an idea of what a 44 X 16 bi-fold liftstrap  door/autolatch  would cost me. This is for rough budgeting purposes, so a ball-park price is what I need. THANKS!

162

My name is Bryce Larkin. Am with RG Business Solutions, I am inquiring about placing an order for some Hydraulic One-Piece or Bifold "Strap" Doors for my Client. I am looking for high quality at an affordable price. Would you be so kind and let me know the types of Doors you carry. Also, would you please let me know what types of payments are accepted at your establishment. Thank you for your time. I hope to hear back soon.

163

Need quotes on a 30x18 and a 40x18. building not yet purchased, not sure on building construction,(pole or metal). could you quote a bifold strap door  both ways installed and with a separate entrance door and remotes?

164

Hi, We need a quote for 13 Lift Straps for the existing bi fold door Model No. S24101 No. 242-2 Serial No. 13621. They currently have cables on them, so we'll need the whole kit.

165

I'm looking for some rough cost estimates for a set of bifolding straplift Schweiss doors similar to the Wyckoff Exchange building, but instead of COR-TEN steel using wood slats as a screening device. Also, I would like to know the cost difference between (1) 25'x16' door and (6) 4'-4"x16' doors.

166

Hello, Thanks for the quote (Bid) #53013 DW. Unfortuatedly, I am now unable to retreive the information on my computer. Please send it to me again, as I am sure this is the bifold door I will purchase. Thanks!

167

Could you send me a quote for modifying my Schweiss door from cable to straps? Door is 48x14 and was purchased in 1989. Can you also include price for autolatches? Thanks, Jim

168

I need a quote for both styles of your doors, Bifold with straps and Hydraulic, installed in a Behlen building. It's a 80' wide endwall with the door centered in the endwall. Building sidewall height is 18'-0". Call me to discuss if you have questions or concerns.

169

Hello, we need to quote a door of 90 ft. wide and 27 ft. height. We want to know prices on both systems, bi-fold and hydraulic, as well pros and cons of each system. This door will go on a concrete building, and we are thinking an aluminum door would work out best. This door will have to be wind rated according to Florida specs.  Kind Regards,

170

You sent me a previous quote for a bifold door over a year ago, but I would like a current offer with current pricing. I need a quote for an opening measuring 14' tall and 24' wide. It's under the name of Dusty W. in Austin, Texas. Thank you,

171

Julie did a bifold door quote for me back on the 8th of this month. The quote/bid # is 11811-KL. There is a change in the width of the door from 36' wide down to 30' wide. Can I get a price on that. Thanks so much.

172

I also need a quote on one 14' x 14' bifold to be installed in the same steel building as the door below. It is to go in a sidewall. These doors are for a local farmer's equipment shop I am quoting for spring construction. The sidewalls of the building are 18' high and I was hoping a 28' wide x 18' high door in the endwall would work. If possible please the include payment requirements. Thank you

173

I have a customer that has an existing Bi-Fold door. It was severly damaged in a wind storm. I need a replacement cost for a 20'wide x 18' High. I have to send this estimate to the customer's insurance. Can my door still be wind rated? Thanks

174

I am looking to propose a deal to the city of Cairo for fourteen of your doors. Twelve of them 14X38 and two 14X48. I am looking for a cost for each door, available accessories and how many man hours it will take for each. Thank You.

175

I own a building that has a 44' wide by 12',6" tall (open to 9',6" clear) Schweiss Bifold door. We just had a bad storm come through my area and I need to know an approximate value or replacement value for the door. Can you provide me with a rough estimate. Thanks.

176

I would appreciate recieving the following additional information: 1) What is the R factor or insulation value for your doors? 2) What should we budget for shipping, installation, etc. for a complete and operational door in addition to your quote?

177

We are doing a programming estimate for a client to replace 3 bi-fold hangar doors, each approximately 79' x 18' and would like an approximate cost for the doors.

178

We are a not for profit organization and are building a hangar at the Palmyra airport (88C). We are wondering if you offer any discounts on bifold doors for not for profits. We are a 501(3)c organization.

179

we called you about a door quote last week. We need to change the dimensions on one of them. We need a price on 8x32 or 8x48 hydraulic doors insulated thanks. Charles

180

Hi, I am putting up a 50 x 75 x 18 shop I am working with extreme panel and a local lumberyard for competing bids. Would like a bid on the largest schweiss door available for the 50ft span. I would like to look at both hyd and bifold. I am tring to get the building done before year end. Thanks, Curt

181

Hello, I visied someone at the farm fest show about doors for my shed. Someone was out and met with me(I can't remember his name) and we measured for the doors. he e-mailed me the quotes so quick. I was suprised. Thank you and keep up the good work.

182

We Need pricing for 4 each 50'X25' Bi fold Doors-Include straps, installation and shipping to Sacramento

183

We need in our design 2 Schweiss bi-fold door systems, dimension 18'Hx32'W, What is the worst case weight for any bi-fold door? we need this information for complete our design a be prepare to receive any of the schweiss bi-fold doors system.

184

Are you bidding The Airport Aircraft Hanger? Bifold bids Tuesday. Please let me know if you need bidding documents and I will email to you. Thanks, Nathan

185

Please provide a quote for three (3) steel bifolds and delivery as follows: Steel construction bifold with straps Bottom mount motor 208/230v 3 phase--not hydraulic Autolocks One (3) button control per door Remote control panel w/ (3) button control Radio receivers and (3) transmitters per door Photo eyes Perimeter weatherseal Header assembly or truss with 12" columns and base plates Sizes: (1) 33'6"w clear x 25'h clear (1) 34'5"w clear x 25'h clear (1) 34'9"w clear x 25'h clear Widths based on use of 12" wide beam columns No sheeting, insulation or installation Delivery

186

I'm really interested in the options you have for your doors. Please include optional pricing for photo eyes, interior liner panel provisions, 3 button automatic switch and emergency back-up hand crank.

187

Please quote 44'x 14' insulated Schweiss Vertical Lift-Door near Waterloo, IA, installed price, steel furnished by me applied by you. This will be on the gable end of a metal structure.

188

I need to get a quote for a 30' x 16' bifold door. It is centered in the endwall of a 60' x 150' x 18', 2:12 steel building.

189

I have a pre-engineered steel building ordered with 3) 12 x 12 framed openings. Will need bi-folds with straps for all 3.

190

I will be building my hanger this year and already have a quote from you earlier in the year. I will be at Oskosh this year and will be visiting your booth. Will you be offering any special pricing during that week if I purchase the bifold door at the show.

191

Intrested in flush mount(more money/less clearence?), Insulation-optional $$, Straps-optional $$, seals. 120 or 240v motor, 152" finished ceiling height. engineer doing up drawing for permit this week, need to finalize my door choice.

192

Need pricing back by end of day tomorrow. Please feel free to call me with any questions. The owner has requested that the schweiss door operates with lift straps and auto latches. Thank you.

193

I need a quote for two schweiss bi fold door systems. one 48'X 12' and one 48'X 13' std. straps, Both Right Inside control, 220 volt, ext. truss, bottom drive

194

We have a dealer in Fairfield Illinois that will be ordering a Schweiss hydraulic door. but before he does he wants to know what size jamb columns and header we will have for clearances. the door will be in the sidewall Approximately 32' wide x 15'2" tall hydrualic door. Corrigated steel panels inside and out with some insulation. if you could send me the reactions and spec sheets for a door around that size. I will get him the information. thank you

195

For design purpose I need the weight and clearance for a bi bold 70' wide 52'tall hangar door and pricing. Can you please add lift straps to the qoute.

196

Hello Julie, I just sent you a request for a 70x14. That was wrong. I need 60x14 or with a wedge that does not go above 18'2". Sorry, Tommy

197

Please disregard previous bifold quote request. Client gav wrong height. Need specifications on 60' X 20' bi-fold door, not 23; high door. Sorry for the inconvenience. Thanks

198

Price on 40' wide x 10' high. Wood frame building with 12' side walls. Most economical folding option. Thanks.

199

would like estimits on a 20ft wideX 16ft high bifold and an 18ft wide X12ft high hydraulic door.Not sure witch way I will go with this.They would need to be insulated.I am in the proscess of converting a 40x60 lesters steel shed into a shop. I already understand the issues with strengthining the header mounts,not a problem.This will be next years part of the build,but I need cost comparisons now to decide which way I want to go.I aready have all your catolog,please dont send more!Please call me if your not please sure what I want,after 5:00pm,work issues. Thank You, Brian

200

A few months ago, I received quotes on both your schweiss hydraulic door, and bi-fold system. My hangar plans have changed, and I am now looking at possibly building a larger hangar - either 50 x 50, or 54 x 50. Please send me an updated quote on my original 45 x 45 hangar, as well as quotes on the two larger hangars, mentioned above. Since there is only one space to list the dimensions on your form herein, I include this information on the 54' building: The opening is 50' x 14'.

201

Please break these bifold doors into an each price as one will be installed in an end wall and the other will be in a sidewall, if it make a difference or not, but for optin brekouts. Thanks, Julio

202

Can you please quote me on 25 x 16 bifold door with lift straps for an airport hanger door is 25' x 16 ' pole barn is 18' high pleasae price with all options as extras, regards Kerbie S.

203

YOU HAVE A BIFOLD DOOR QUOTE FOR ME IN YOUR SYSTEM AND I WOULD LIKE TO KNOW IF YOU CAN PROVIDE ANY FINANCING OPTIONS. OTHER DOOR MANUFACTURERS HAVE LENDERS THAT THEY WORK WITH & I WAS WONDERING IF YOU HAD ANY. RESPECTFULLY, BRIAN

204

I'm bidding a project in Salt Lake City Utah known as Hospital Main Lobby Remodel and they've spec'd one of your hydraulic one piece doors at the gift shop. Architect is Architectural Nexus. I'll complete the form shown below, but would love an opportunity to speak with a rep as soon as you get a chance to give me a call. The project bids next Thursday, 5/26. Thanks for your help. Other details: Op cycles min 50,000; glazing panels 1/2" minimum fully-tempered; weather seals for smoke, full perimeter; locking devices; electric door opener; cable type.

205

I am in need of a door price. I am a metal building dealer. I have a customer that wants a 40'-0" wide x 20'-0" tall bifold door. Can you tell me if this is possible? And assuming it is, can you give me a price? I assume that I will need to provide the sheeting and trim to match our building. Call if you have any more questions and/or need more information.

206

Hi, I have a qoute from you fro a 50'x16' bifold. I need a new quote for a 50'x15', same specs. except add the Weather Seal Kit and lift straps. Also give me an option for windows. What is your current lead time. Thank You, Harold J.

207

About a month ago you sent us preliminary quotes and info on 75x16 hydraulic and bi-fold door systems for a new hanger building we are designing in Hot Springs, SD. The owner has revised the door size to a 70x 16 ydraulic door. We are working on the drawings for the building right now and I am assuming the spec details will not change do to the width change. The Electrical Engineer is requesting power amperage requirements and/or motor horsepower requirements for this size of door. If possible we would like to give the owner the updated door spec info based on a 70' wide door and get the electrical requirement to the Electrical Engineer this week. Thanks Again for the help.

208

Requesting price (best price option between strap bi-fold and hydraulic one piece) for a 60' x 20. Thank you.

209

Please quote 3- 50 x 16' and 1- 55' x 16' bifold with lift straps and hydraulic doors fob Springbank airport. Please include all hardware,motors etc as a seperate item

210

Please update my quote. This new schweiss door that I am requesting will go in at the same time as this one. Strap Lift, Bttom Drive, Manual schweiss auto Latches, 4x3 Slding Bottom 1/2 windows (2) Need design spec's on this door as well for Butler. Thank you

211

Would like to lock on price on three bifold doors. Wont need until late June or July. I waiting for cement to be poured in early June to get final opening. I have had price quoted over the phone from a Julie. Give me a call Thanks

212

I would like a few door prices. I want to thank you first for always pricing the door I have you quote. You have probably quoted a dozen or more doors and only have sold me 1. But bid alot of jobs and try to sell them on your doors once they got over 20'. Thanks This is a new building so if there is a size that works out better for material of the system please price it that way. The customer would like 2- 16' x 40' to 44' Bi-Fold doors. One will be in the end wall and the other in a side wall. I am pricing a wood and steel building. So if you need more information please let me know. I will design the door openings to your needs. Thanks

213

We are a coiling & sectional dealer / installer and are bidding a project that includes 2 Schweiss Bifolds in our Bid Category. Do you have a Michigan distributor or will you quote us directly? What is your fax # so I may send you the specifications??

214

Hello, Please send me a product binder with everything you have offer. My boss is very interested in your bifold and hydraulic doors. He's hoping to use them on our future jobs.

215

Dear Sirs: We have a new building for heavy equipment (bulldozers, backhoes, Trucks(CAT 773) Articulated trucks)and we require to specify this brand of door on our project. The project requires 5 doors, 20'x20' bifold type. We look forward to your comments.

216

We are bidding the Gatlinburg Pigeon forge airport on Tuesday. included is a 50' x 16' Bi-fold door we need your quote.

217

Last January you gave me a quote for this project in  WA. The job has changed a bit, so please requote: We need one 70' x 20'9 clear open, one 50' x 20' clear open and 6 each 60' x 20' clear open. Bifold doors only. Thanks

218

We had received a quote from you. This project is up for bid again, we were wondering Would you provide a new bifold door quote based on the quantities/info provided for the quote? Thank you

219

I have a project in Los Angeles CA. We're looking at a 12' x 20' opening and I'd like to learn more about what type of Schweiss designer door you can provide. I can e-mail drawings if that would be helpful.

220

Schweiss, Are you bidding, or are you aware of a project in Fairbanks SD? It has two hydralic doors and Schweiss is on of the three hydralic door  listed in the specifications. Please advise. Thank you. Marnie

221

I am involved in the supply and erection of a pre-eng. hangar having an entrance door opening of 42 ft wide with a minimum height clearance of 16 '- 6" ft. The eve height will be either 18 or 20 ft. Please supply your quotations for both Schweiss door systems 1) supply only FOB Key West, FL and /or supply and installed. Delivery would be for late May or June of this year. Closing bid date is March 10, 2010. Regards Rick

222

I am quoting a project in New Iberia, Louisiana and need a quote / info on a Bi-Fold door.The door size would need to be 100' wide by 28' in height. The door quote that I need from your company is an installed price.

223

I need a price for a bifold door 55'wide x 14' high clear. Please return by wed,2/17. We are bidding this hangar project on thur,2/18

224

I just found this door sales quote insert on your webpage, having just sent off another request, so this might be duplicating the prior email request door Quote bifolds either by email or mail is fine.

225

THANK YOU FOR YOUR TIME. THIS IS FOR A PROJECT IN AN AIRPORT WE ARE BIDDING ON THAT WILL NEED SIX HYDRAULIC RED POWER DOORS

226

I had you price me on 11 bifold doors at Sun N Fun in the spring.Ive lost my paper work in a storm that flooded our building.The doors were 43 ft by 16ft.Could you please re quote me or if you can find the orginal please resend.We are looking at getting started on this project soon thanks.

227

Looking for a quote on bi-fold doors. Harrison county airport has plans to replace up to five of their hangars. I am currently working on budget pricing for them. This is a long term project with the first hangar preliminarily thought to go up next summer. Each hangar has 10 bi-fold doors on them. Please call with any further questions.

228

Looking for a quote on the Clear Lake Regional Airport. The door required is 55' wide, 15' high, Wdg. 30", Overall Height 18'-6", Door Style Schweiss, Drive Type Bottom Drive, Lift Type Strap Lift, Truss Int., Hinge Style Single Hinges, Tot W-Inches 662", Tot H-Inches 222"

229

Your product was specified by a Architect on a project on which we're bidding. Please refer me to a local installation company where I can receive a quote on designer bifold doors. Thank you.

230

Am currently bidding the construction of three airplane hangars. Each building specs bi-fold doors. I am requesting pricing for each building separately. Alt#1: 10 doors, clear width 43'6" clear height 14' Alt#1, A1: 1 door 47'6" x 14' Alt#2: 12 doors 41'6" x 12'

231

Are you going to be bidding on the doors for the Bay County Airport Project in Panama City, Florida and the Calhoun County Airport in Blountstown, Florida? If so we would like to get a quote from you. Please contact me as soon as possible. Thanks

232

Schweiss, Attached are the specifications and drawings for the bi-fold doors for the Benton County Oregon Fairgrounds project. The base bid calls out for sectional doors and there is an alternate to go with bi-fold doors. We are looking for a quote for the supply of these doors, but were also wanting to get an estimate for the assembly and installation (approx. man hrs/door). The project is located in Corvallis, OR. Thank you, Joseph

233

I need a quote for the following. Main Door Framed Opening: Designed for Hydraulic/Bifold, Horizontal Accordion, or Horizontal Sliding Section aircraft hangar doors. Framed opening size: 110'Wide x 28'High (Metric 33.52m Wide x 8.53m High)

234

I AM NEEDING TO GET A QUOTE FOR (2) BI-FOLD DOORS. IT IS GOING ON A PRE-ENGINEERED BUILDING WITH METAL JAMBS. THE DOORS WILL BE MOTOR OPERATED WITH THE MOTOR ON THE BOTTOM (240V SINGLE PHASE). 1 - 40'ow x 18'oh 1 - 36'oh x 18'oh

235

Can you give me a budget price for a 38' insulated bifold door with frame and hardward Thanx Vic

236

To Whom it May Concern, I am currently bidding a project in which your specified hydraulic Red Power doors are required. The project is in Philadelphia, PA. There are (3) units reuqired. (1) @ 20'-0"x9'-0", (1) @ 10'-0"x9'-0" and (1) @ 9'-0"x-'-0". I would like to receive a quote for the above mentioned. If you have any questions or concerns please do not hesitate to contact me. 

237

We are bidding on town of Truckee maintenance building hydraulic door with backup Red Power system. However if you should need anything further please give me a call and I will provide anything you need. one last thing. Thank You Again, Tom

238

I have one of your doors currently. It works great! Please send a estimate for another door 14' x 14' Thanks Gary

239

ATTN JEREMY: Please quote option for (1) walkdoor. If we get this the customer wants one. thanks. jim

240

Please provide a quote for the door specified below. Please break out cost of door and installation.

241

also need price on a 16x14 may also pick up I will be in the area in the beginning of april

242

If possible, please have someone contact me today. I am on a tight time frame to provide an estimate to a customer. To see the type of building this will be going in, go to website Thanks

243

wondering what the cost would be on this door, let me know if you have any other questions. Terry

244

I asked for a quote a couple days ago but I gave the wrong email address as .com instead of .net. THANKS!

245

We need to talk about pricing a project. I have 5 days to get it put to bed. Please call me.

246

Please quote the following Doors for a project we are involve with and is in the planning stage. Your prompt attention would be apreciated Thanks

247

Hello everyone. The economy stinks bad here, which is why you have not heard from us in a while. Please quote the door below as soon as you can get to it. Thanks, Paul

248

Please quote per below. Would like to have a Standard Door in the bottom panel as well.

249

Just trying to get a ballpark feel for price so I don't waste your time. Door needed is approx. 10'h x 20' wide. Also, installed in Baltimore-Washington corridor? Thanks KBR

250

Could I get a price on 1 & another quote on 2 also when the unit is opened do I have enough clearance to back a 14.5'H cargo container thru

251

I was just in contact with Sales about job # - quote reference. We discussed getting an update on the door price (which now will be for 2 doors). I am leaving the office for Nashville very soon. I will need the quote e-mailed to me (as well as faxed, will also be a good back-up) As I may miss the fax. My Estimate Package for the Project needs to be completed this week-end for the Customer approval Monday. All the pieces of my puzzle (including your quote) must go together this afternoon. Thanks! Look forward to working with you on this Project. ed

252

Jeremy, I did not get the information we spoke about this morning on your Bid. I thought perhaps my email address wasn't clear enough for you. Thanks again for your help. Steve E.

253

Could you give me a rough quote on a door including installation to fill an opening 58' wide and 20' high?

254

Would like the quote for all 3 levels 1. Door only w/shipping 2. Door w/supervised install-final inspection 3. Turn Key also for 18 high

255

This building is not build yet. It is in the planing and development stage. Just looking for a quote I would also like a price on 46x14

256

I am in Iraq right now so a phone call is impossible. Please give me prices delivered to my house. Also, The various prices for you to install if I don't have the time to do it myself. Thanks, Joe

257

I am interested in a quote on three doors. I have sent you the measurements for the largest door. I would like for you to call me on my cell phone at your earliest possibe convenience. Thank you.

258

Construction will begin this early Spring 08. Am looking for an Early June 08 delivery if possbible. Would like a quote for a 40'wide x 18'hieght door also. Thanks. Norm

259

talked to brook about bi-fold pricing 2-29-08 brook: please send some packets of broshures for my costomers Thnaks hb

260

I HAVE A AIRPORT JOB THAT BIDS FEBRUARY 5, 2008. IT INITIALLY SPECS ONE PIECE AND WITH AN ADENDUM THEY ALLOW A BI-FOLD. IF YOU COULD PLEASE QUOTE THE FOLLOWING SIZES IN BOTH CONFIGURATIONS: 8 - 42'X12', 2 - 50'X12', AND 2 - 60'X16'. I CAN FAX THE SPECS IF YOU CAN SEND A FAX NUMBER.

261

Doug DeGrave Construction Please call ASAP. Need a quote on several different size doors. Thank You DD

262

Hello, Can you give me and idea on a cost for each of your doors, The opening is 7'-2" tall and 8'-4" wide, will this include shipping. Thank You Rick

263

please call me tomorrow morning. i'd like to ask some questions about pricing and design thanks! ally

264

Helping a friend purchase a door. Need a bid from you. Opening is about 45' X 18' but need to measure more closely (later today). End opening is triple trussed and spaced w/2X6. May need additional bracing. Auto latch, emerg stops, straps (not cables) & wind pin/s.

265

I need a quote for 2 doors with operators. 1- 30' x 18' 1- 24' x 18' These doors need to be delivered to Gallatin Gateway, MT 59730.

266

I'm in the process of negotiating for the purchase of a 48 ft. x 84 ft. Hanger that does not have doors on either end. In fact, the unit could be considered not finished. Although it has a concrete floor and pads on the outside of both ends and is insulated. Just doesn't have any closures on both ends. I'm interested in obtaining pricing on your product. Please provide pricing predicated on doors on both ends. Thanks.

267

I need quotes on the door in the quote section plus 1 Ea. 48x17 1 Ea. 65x17 side wall placement

268

You have no pricing on your doors? I would have a few prices on a door that most people use? Im looking for 7 high 9 wide ,light weight door that I can open by hand?

269

I have a building prospect at Hancock Minnesota that is looking at putting a 40'x16' door in a new 60'x100'x16' building this Fall. I'd like a price from you guys that I can include with my building quote. Thanks, Daryl

270

Please quote a Bi Fold Door 34' x 12'. With freight to Tucson AZ. You have quoted us before.

271

CAN YOU PLEASE SEND ME A QUOTE ON THE BELOW SIZE OPENINGS. I ALSO HAVE A OPENING OF 25' X 25' THESE ARE ROUGH SIZE MEASURMENTS

272

I need a price on a 54' x 17' bifold door delivered to Fe dale, MT in flathead county. Thanks.

273

I need a door with an opening of 35'X 12'. Can you install in Idaho? What would the cost be? Thank you. Jim .

274

I sent a price request to Jeremy by email on Tuesday our time. I will send this form as well for in case. The price is necessary by the end of this week our time. Thank you.

275

I would like to get some prices and information on your doors. Doors are aproximately 24'Wx20'H and I will need somewhere between 9-18 doors depending on our final design. Thank you very much, Nevada M.

276

We have a customer that would like a bid from us for complete construction of an airplane hangar. I would like to know what questions I need to ask the customer to get an accurate bid from you're company.

277

Just wanting a price quote. Also please price out a 20'wide x 15' high for the other end of the building. Thanks

278

I am looking for a budget price on a 50' Wide door. We would like 20' Clear. Thanks. Bernie

279

I received a preliminary quote from you a month or so ago, and I'm sorry to sat that I've misplaced the email. I've added the data below again. My building is being built right now. It will be a wood structure with a triple truss as header, and an 8" column on either side. I think I received a quote in late July or August. Thanks for the help.

280

PLEASE QUOTE / ALONG WITH THIS PROJECT THERE WILL BE 2-22'X22' DOORS AT A LATTER DATE. IM SURE THERS QUESTIONS PLEASE CONTACT ME AND I WILL GO THROUGH THE HOLL PROJECT WITH YOU THANK YOU. DENNIS G.