Need design criteria for a 80' x 20' strp lift bifold pre-engineered steel door. Should be fast opening, weathertight door used for semi-truck loading and unloading out of CT.
These Doors will install in a Pre-Engineered Steel Building. I already have shop drawings from you for the door reinforcement needed. I have listed 40x 14, but I also need a quote for a 30 W x 14 H ( both types, hydraulic and bifold with straps) Sidewall location
I need design criteria for a 70-0 x 18-0 hydraulic and bifold liftstrap door to design our header system in a pre engineered metal building. This is for a project in Pocohontas, Arkansas. 2012 IBC with 115 mph windrating. thank you!!!
I am a District Manager for steel building company. Have referred your doors for many years. I am requesting your door criteria for opening size, hinge locations and loads, etc. for providing design and price for my pre-engineered building. BiFold (with straps) is 30'-0" wide x 16'-0 (clear under open door). I will also forward your info to the customer for his use and hopeful purchase.
NEED BUILDING SPECIFICATIONS TO DESIGN A 80 X 27 BIFOLD LIFTSTRAP DOOR AT EW OF A PRE-ENGINEERED BUILDING
We are quoting a pre-engineered metal building to serve as an aircraft hangar for a client. The design calls for a "Schweiss Straplift Bi-fold door". The door size is to be 60' wide with 18' clear height, Bottom Drive, Internal Truss design and 10 year warranty. We would like a quote from you so that we can include the door along with our building quote. We also need an idea of the weight and/or loads of the door to incorporate into the metal building design.
Looking for large Farm Shop door, 48'x16'. Steel door to be installed Pre-engineered metal building. Not sure what type door would be best bi-fold liftstrap or hydraulic one piece farm shop door.
Please provide a quote for 40 ft. x 10 ft pre-engineered steel door to be installed in a pre-engineered steel building. Include freight. Steel door "finish" will 26 ga. metal building wall panels.
I am pricing a Pre-Eng. Steel building in Alberta, Canada. The customer requests two 40' x 18' Bi-Fold Strap Door Systems in either end. Provide me with a door quote. It is a steel door for agricultural purposes, and our steel provider will supply the steel door cladding to match the building.
I'm working on a pre-engineered steel building that will have a bi-fold strap door on it. I'm needing the door loading specs & a quote to provide the client. The building will be a 60x60x14 (1:12). Large steel door will be centered on one endwall, 40x12.
Interested in pricing two pre-engineered doors 28' wide x 18' high, to be installed in steel building in Texas. Building is 61'-4" wide, 92'-6" long, with 20' eave height and 2:12 roof pitch. Doors centerline both endwalls. Design Loading 20# LL 90 MPH Wind Load Door 20# Grd. Snow Load. Door design is based on using bearing endwall door frames, with sectional steel overhead doors. If we switch to bifold doors, will we have to switch to full-load endwall door frames? Will Schweiss Doors come and install the framing. Can my door erectors do the door sheeting and trimming? Do you include jambs & freestanding door header?
I'd like to know the ballpark cost for a bifold strap door for a pre-engineered industrial building (existing). Door would be 80'x15'. Walk door, windows, backup systems. The installation would be in Janesville, Wisconsin. Thanks.
Please quote a Schweiss liftstrap bifold door with autolatches, walk door and a backup system located in NY to be installed in a Pre-Engineered Steel Building. The door opening size is 30'x10', Please include the correct loads so I can add them to my building quote. Please include delivery to the job site.
Please quote a 50x18 clear bifold liftstrap door installed in endwall of new Pre-engineered steel building. Please quote separately free standing header, man door and labor to install. Please FAX design information for metal building supplier
I am looking for the load reactions and drawings for your bi-fold doors that a customer is considering using in a pre-engineered metal building we are proposing to him. He is looking a direct purchase with your company, so all I am after is the load reactions so they can quote the building accordingly. The doors sizes are 1) 60 x 16 and (1) 40 x 20' These would be for a project located in Buffalo Center, IA 50424, using the IBC 06 building code, 90 MPH wind load, B exposure & 25 lb roof load.
Good Morning, I am preparing a budget estimate for a client that is asking for a 50\' Wide by 30\' Long by 13\' High (at Eave) pre-engineered metal building. They are wanting a 40\' Wide by 10\' Bifold Door with autolatches and lift straps. In order to design the structure I need spec sheets A-1 thru A-5. Our office has requested this information from your company before in the Estimating Department. If you do not have time to prepare & send the spec sheets can I get the basic design criteria to input into my MBS program, please? Please provide the following: Total Dead Weight Wedge Approximate Hinge Stub Column spacing.
I have a customer looking for a quote for a 60%u2019-0 wide X 17%u2019-0%u201D high Bi-fold Liftstrap door. It would be installed on a pre-eng steel building the job is in Fort St. John, BC Canada If you could get back to me with a price as soon as you can that would be appreciated.
I need a price on a 40\' x 14\' hydraulic Red Power door. It will be installed in Obion, TN. It will be installed in a pre engineered metal building. I will be contacting you for some loading information on your door. Also what is your electrical requirement for the hydraulic unit?
We are quoting a project in Sacramento, CA. We are furnishing a pre-engineered building. Yesterday we were asked us for an alternate to furnish & install 4 ea 50'x 18' folding air-hanger doors. That is their spec. I would add 85mph, strap lift, we will furnish framed openings, figure shipping. You have quoted us before for Hayward airport which went very smoothly. Anyway can you quote tomorrow?
Hello We are quoting a pre eng. building for our local airport and would like pricing on two bifold doors as noted below. Please contact me with any further questions. Thanks Rusty
I am in need of a price for a 30' wide by 16' tall bi-Fold door to install in a new metal building. I am not very knowageable and would need someone to discuss options. This will be going in a new pre engineered building and I want to incorporate into the design of building. Could you price a 35' wide door with the same height?
This is for a pre-engineered building we are going to sell. I need an estimate on a 60x15 bifold. Also, a 60x15 hydraulic panel door (3 @ 20-foot sections). Also, a 30x12 electric overhead door. How much extra for remote openers?
Hi I am working on a future airplane hanger bldg proposal, the customer would like a 55'wide Bi-fold door. When door is all the way open it needs to have a clear height of 16'6". My Bldg supplier said I should contact your company for best doors around. Can you send me a quote for door, & tell me what loads will be needed in my Pre-Engineered steel bldg. Also clearance are needed so I can size my opening to fit your door. Right now I have bi-fold going in endwall of a 64'X72'X20'X1:12pitch bldg. What height does my header need to be @ to clear a 16'6" min.full open door? Thanks for your time, I will await your reply. Location of project is Oshkosh, WI
I would like cad details of the jamb/head and sill conditions of the bifold door to put in a bid package. We would also like to clad the door with the same lovers that are cladding the surrounding facade areas so door will be thicker. We would like to have a flush face but have surrounding construction so detailed drawings of any equipment/clearances, side rails, hinges etc would help us confirm that the other elements are in the correct place. This is for a pre-engineered steel building.
We are pricing a hanger for a client. The bifold door size is 50'X14'. The building type is Pre-engineered. The Door will be installed on the gable end. The eave height of the bulding is 18'. What additional loading to we need to consider for the building
I'm lookong to put up a new pre-engineered shop. It will have a 50ft wide end wall plus 16ft walls I want to know what size opening and how tall on a 22ft wide Schweiss bi-fold door
would like price on Schweiss hydraulic door for a new pre-engineered steel shop. Thinking about a 40x16.
Need quote on 28 wide 18 high bi-fold for a steel pre-engineered building. Interested in windows and lift straps. Thanks!
This is for a project we're negotiating, hopefully the first of three buildings. This bifold Schweiss door will be placed in the 65' end wall, as close to the pre-engineered metal building corner column as possible, of a single 1:12 roof slope, clear span building with the high side eave height of 28' and low side eave height of ~22'-7".
How long of a wait would we have if we ordered today. We would like to get the door right away, snow is coming and would like to plug the hole in my pre-engineered shed.
Please send me price and other important info about this Bifold door. It'll be installed on steel pre-engineered building. Price delivery to the St Louis, MO area
looking to quote a 12 ft x 60 ft wide bifold hanger door. This door is going on a pre-engineered steel building.
req. door quote for a bi-fold on a steel pre-engineered structure. options needed are remote opener and the fast lift straps.
Need specs for (2) 40X16 bi-fold doors, both of which will be installed on the same sidewall of my metal pre-engineered building. Thanks
Please Quote us for a Schweiss Bi-Fold Door per size given below. We are Pre-Engineer Metal Bldg.Manufacturer and we are quoting the Steel Bldg. which is including the said Bi-Fold door. It is highly appreciated if we can get the price as early as possible. Thanks, Dave
1 need pricing for a 32'x14' bifold door. this door is for the end wall of a new steel and wood preegineered building that I"m bidding on now. Please have someone contact me on the pricing of this door.
We are interested in your hydraulic steel door for our pre-engineered steel hangar.
Need budget on (4)30' wide 25" tall schweiss bi-fold doors, insulated, electrical operated. To be installed in pre-engineered metal building. Need budget this afternoon!
Please quote price and delivery for a bi-fold door with opening of 39' x 10' high. The shop is pre-engineered steel building.
Looking for bi-fold door w/strap lift. Quote with and w/o auto latch. The ware house is pre-engineered steel building. Thanks, Walter
I need a schweiss bifold door installed for me in Owensboro, Kentucky. It is new pre-engineered construction on a farm. I will not have the equipment either, so that will need to be provided as well. Thanks, Oliver Benson
Would like information and a budget price on 2 different size doors, 30 wide x 12' high and a 36' wide by 12' high. We are looking at 2 bifold doors of each size or 4 doors total. I have never used this kind of door before but if it works a lot better than the other commercial alternatives we will consider using it. It would be nice to see some details of how this is incorporated into a pre-engineered metal building, maybe even an old project shop drawing.
I am planning to build a pre-engineered shed later this year and I am considering either a bi-fold door or a hydraulic door. I am still in the planning stage and want to learn about costs, options and construction of doors before I commit to a shed design.
Looking for a price on a Schwiess Bi-fold with lift straps 44' x 12'. The door is going to be mounted on a steel pre-engineered shed.
I need a bid on a 30x14 solid bi fold with electric operator 220 1ph power the builder also needs drawings and weights asap to get building engenered for weight. Chuck M.
Hello, I'm Erecting a pre-engineered steel structure and I need you to figure a price on a 34-0 X 18-0 Bifold door with straps.
I am quoting a building that is Pre-engineered that has and opening on the end wall that is 70' wide and 16' clear opening. I would appreciate a quote from you guys. I purchased a schweiss vertical lift door last year that went to my nieghbor in Nebraska. Please contact me on my cell phone Monday May 23 if possible and send a quote to my email. Thanks Jerome
Would like a budget quote on a 70' x 50' Schweiss Bi-fold Door System going in a PEMB. Please quote engineering, furnish and install in CA. Motorized with my sheeting on it. Thank you, Allen
For installation in Washington state on a steel pre-engineered structure: Estimated shipping and typical installation costs for my vertical lift system.
Good morning, I need a quote on a standard 40'x18' Bi fold door with all standard hardware/motor/etc.... No cables, I want straps for lifting the base and a remote for an alternate. This will be going in a standard Pre-Engineered metal Building. Delivered to ND. Please holler with any questions. Thanks. Heather
Like a quote on both a bi-fold and a 1 piece 16x24 end door unit. I am getting prices all together so I can put up a pre-engineered steel structure.
Would like information on the bifold strap doors, planning a pre-engineered shop now and was interested in using your doors. The rough opening will be approx. 50' x 15' high.
I desire pricing (and structural requirements for) a 48' wide x 24' tall bi-fold door that is to be installed withing a pre-engineered steel building. The client is a manufacturer of off road lowboys, bucket transporters, cable reelers for the open pit mining industry.
I'm looking for a quotation for a bi-fold door to go into a building we are quoting for a client. The building will be a pre-eng (Star) Hangar for an Airport in Lloydminster, Ak. We are looking for a 60' x20' bi-fold door to be clad with our wall panels. The building will be 125' x 80' x 22' and the door willbe mounted on one of the endwalls of the building. Please contact me with any questions you may have. You can email your quote to my emailaddress. Thank you in advance for your assistnance.
(2) 40'-0" x 16'-0" Bi-Fold Doors without remotes(1) walk door and frame for existing Bi-Fold Door For pre-engineered metals buildingsWind load 110 mph Delivered to Valley Springfield, Texas Thanks
Would like a quote on a bi-fold door,(strap operated). Framed opening in end wall- 30' X 16' The eave height on building- 18', Roof Pitch- 4/12. Delivered to New Mexico Question: Does a pre-engineered building company need to know about the possibility of using a bi-fold door? Is there need beefing up the framed opening for a bi-fold door versus a sectional overhead door? I have a farmer client thinking of building a large equipment building. 50' or 60' X 100' Thank You
Would you please quote: 40' x 18' bi-fold door, the door will be installed in a pre-engineered steel building that will be designed for a bi-fold door. Can you quote freight to CA. What is your delivery schedule?
I am thinking of building a steel hanger 50'x50' with 16' high ceiling. The door would be 44' wide and 15' tall. what are my options and what would be the weight. I like the one piece hydraulic Schweiss doors. Do you have engineering specs. that I could give to my structural engineer. Please include prices. This building would be a light gauge steel stud building. The trusses on most of the building would be light gauge as well. The truss over the door will depend on the specs. you provide.
Please quote on one bi-fold door to be 50' wide x 13' high in the open position. Door to be installed in the endwall of a 70' wide pre-engineered metal building. Job is in Porterville, CA 93257.
Please quote the following 36x16 Schweiss Lift Door going in the end of a new 60' wide x 16' tall Astro Pole Building. Location is David City, NE Price Freight, Install and Install of metal fabric and trim . Astro would include the metal and trim but not labor to install. Include oter items that are advisable. (safty devices, weather strip, remotes Cordially David M.
we are currently designing a 3 bay aircraft hangar. each door will be 65' clear wide and 19'-1" clear high when door is fully opened. the building will be a pre-fabricated metal building. we need as much information as you can provide us as we are designing the building around the bifold requirements for these doors. ie, distance from door side columns to main frame rafter/column, height to bottom of header/building sheathing, etc. your prompt response is appreciated. thank you.
we currently are quoting a pre-engineered steel building with a 35' x 16' opening --- option with a OH or a bifold Please supply us with a quote
Please send specs. (including clear height, rough opening sizes and any deflections) for a 16'hx44'w and a 14'hx30'w bi-fold doors to be installed in pre-engineered metal buildings. thanks, Dave
I am working on a budget price for a pre-engineered metal/steel building and the owner has requested a 40' wide x 16' high bifold door. The door would be skinned with corrugated metal siding to match the metal building. Could you please provide me with a ballpark figure as to what one of your doors of this size would cost? Please call if you need further information. Thank you.
Can you tell me the wedge necessary for 40' x 18' - 20' bi-fold going to Texas . The door will be for a metal building with a rigid frame endwall. If you would like to include an estimated price range that would be great. At the appropiate time I will direct the customer to you to purchase the door direct. Thanks for the assistance!
Please furnish estimated purchase price & installation cost and "typical" support details for a 50'w x 16'h hydraulic lift hangar door in the end wall of a pre-engineered metal building. Thanks
I am working on 2 hangers both are 60'x60'x20' I need pricing on 2 Bi Fold doors 50'x 16'or 18' Door sheeting is provided by my pre-engineered building co.
We are a pre-engineered metal bldg manufacturer. Our customer is requesting us to provide an opening with structural support for a 50'-wide x 16'-clear height Schweiss bifold door. What height opening is needed for your door? Our bldg eave height will be governed by this. Thanks.
This bifold door is planned to be installed in a pre-engineered building in St. Clair Shores, MI.
Both the hydraulic doors requested are going in the end walls of a Pre-engineered building which is 120' long and 70' wide(end walls). The height of the door is to be 18' clear and I will require the rough opening for Butler to design.
We are pricing a new 90' x 112' pre-engineered metal building for an agricultural equipment dealer. Could you please quote a 30' wide x 18' tall bi-fold door? The door will be located under a ridge frame endwall. I will also need loading information that I can pass on to the metal building manufacturer. Thanks for your help.
We are working on a proposal for a airplane hanger and need a price for a door. Size 40' x 16' for a 50' x 50' hanger building. The eave height will be 18' or 19' depending on the requirements for the door and the Pre-engineered building. We need a price fairly quickly on hydraulic doors, please call or email if you have any questions. George
Please quote a 42' wide x 12' clear high bi-fold door with lift straps. I also need load information. This is going in a pre-engineered building. I could use the loading info today, if possible. Thanks, Mike
LOOKING FOR A PRICE FOR A HANGAR DOOR 73'-0 WIDE AND 20' CLEAR OPENING HEIGHT. I NEED SPECS FOR SUCH A DOOR TO DESIGN FRAME OPENING ON A PRE ENGINEERED HANGAR.
We are looking for a bi-fold door preferably around 90' wide with an open door clearance of 19' high. The door will be put in a pre-engineered steel hangar building 100'x100' (Gable style)
Hi, I am looking for a price on two large bi-fold doors for a pre-engineered steel building which will be used as a small plane and helicopter hanger, one door should be approx. 50'x20, and the second door should be approx 40'x20. Cheers, Craig
I need pricing on the following for a pre-engineered metal building hangar project in Aruba, Dutch West Indies, 60'-0" W x 17'-6" H - Code - IBC 2006 Wind - 100 MPH Exposure - C Please indicate if I need to budget for R panel to skin your door. I assume so, but please confirm. Please have someone copy me ASAP. Thanks, Larry W.
WE ARE PRICING 48-8X24X8 BIFOLD DOOR BUILDING IS PREENGINEERED SIDE WSLL NO COUVERING ON DOOD WE WILLSUPLY
Hi, I working in a preliminary design for a Pre-engineered steel building that we are going to used a bi-fold door with total clear opening 79-0" and a overall height of the door of 20'-10". Could you suggest me dimensions (steel section) for the side columns, stud column, continuous header? Thanks in advace, Beatriz R.
I am seeking information on installing one of your 18' H. x 50'W., bifold doors in a end wall of and existing pre-engineered metal building. If someone could call me I have a sketch that I could send that we could use as a point of reference to see if this can be done. Thank you, Jerry W. Director, Facilities and Special Projects
Need a quote for a 70' x 20' bi-fold Pre-eng construction end wall location Romeo , MI call for additional information
JDG Construction is a Design Build Pre-engineered steel building Contractor. Authorized HCI Steel Building Systems distributor Pricing to include: 1. Professiona Engineer designed system for wind loads 2. 1/50 yr wind = 12.53 psf 3. Door to be insulated plus 24 Ga cladding 4. Door to be complete with all weather seals top, sides, bottom 5. Hoist straps to be used ( specify desired motor voltage) 6. Building endframe complete with structural header will be provided. 7. Wedge height to be 36" or higher as economical 8. Allow framing for four (4) 3' wide x 18" high windows - sill elevation at 4' appx.
We are a design/build contractor working with an owner for a pre-engineered hangar. I would like to get a quote for (2) doors for this hangar. I would like a quote for a bifold with straps and also an alternate price for a one-piece hydraulic. The door sizes are: (1) 63' wide x 17' tall. (1) 44' wide x 17' tall. We will provide and install the fiberglass insulation and metal siding for the door.
We are bidding a project for the University of Illinois Willard Airport, a new T-hangar that will require 10 new doors with 41'-8" clear openings width x 12'-0" clear opening height. We as contractors are responsible for the pre-engineered steel building design. I am requesting a quote from you as well as engineering information that we can use to design the building. I will be happy to email drawings and specifications upon request. Each bi-fold door will also require a 3' x 6'-8" personnel door built in. Please call or email to discuss further. Project bids April 3, 2008, but I will need design information as soon as possible, so I can design and price the building.
I require a quote for a Strap Lift Door 42' Wide x 14' high to be used in a pre engineered metal building at the Watertown Airport in Watertown, WI Please include information on what components of the door and installation we will be responsible for, sheeting, insulation, power requirements and associated details deemed necessary for teh meatl building supplier. I require teh typical detail information as soon as possible and a quote for teh door unit next week. Please contact me with any questions-Thank you!
I need a price on two bi-fold doors. One door is 30' wide by 15' clear opening. The other is 35' wide by 15' clear opening. Pre-Engineered metal building by Schulte Building Systems. At this time, I have a proposed eave height of 18'. These doors will be on an endwall, 1:12 pitch. Call with any questions. Job is in Olney, IL. Thanks John G.
We plan to build a new hangar in 2008 and as such I have a question about your Bi-Fold doors. We are planning for a clear opening of 70 feet wide by 22 feet high. Do you make doors this large? If so what is the cost? The hangar will be pre-engineered steel construction.
In reference to Bid. Thank you for your quote. In order to complete my quote to the end user, I would ask that you provide me with the door specs, ie. weight, hinge points and moment loads imposed on the pre-engineered steel building. Thanks, Paul International sales manager
Spec Description follows: Bi-fold Hangar door to be a strap lift type as follows: Structural Tube Frame with Truss Design to prevent sagging. Heavy duty hinge support system coordinated with PEMB (Pre-engineered Metal Building). 1 inch center wind pins minimum to increase wind load. Automatic limit switch and electrical disconnect. Fully insulated door system with bottom, side, and top seals. Exterior siding material to be by PEMB supplier. 2 year warranty. Startup service and training to be provided. Equal to "Schweiss Bi-fold Doors". One door at 17' height; one at 16' height - one end wall one side wall New hangar is a new addition to existing structure.
Could you please provide us with your product catalogues as soon as possible. We are distributors of pre-engineered metal buildings and would like to offer your products along with ours when requested by our customers. Also I would like someone to contact me regarding a specific project we have. I need to know if a deflection criteria is required for 50' and 40' hydraulic doors. Jack H.
Please figure a 60'x16' tall door going in a VP pre-engineered steel building the Building is 100'x70'x22' the rigid frame endwall that your door goes in lays out from outside left 16' from corner then 60' door then 24' to corner please price door materials installed or separate price
I need a quote for a 14'X 65' door going in a new prefab steel building. single phase. EMAIL ONLY PLEASE!
Looking to purchase hanger door 42' wide with 12' head clearance. This will be going in a Pre-Engineered Metal Building. I actually have 2 hanger to produce that are identical. Need pricing and how the end walls should be laid out to accept a Schweiss door. I think we need the 24" wedge, motor on the bottom, gasket materials and panel lengths, have a great day. Gary P. President
I need pricing for a 60' x 14' bi-fold which will install to a pre-engineered steel building in Rexburg, ID. I need the option of cables or straps. You can e-mail or fax the quote. Thank you!