79: HURRICANE DOORS

1

for project that bids%uFFFDa schweiss door Aug 9, 2010. Booneville/wisconsin Airport

2

Bi Fold Doors to be used in a residential shipping container building project on the beach in Puerto Rico. Price as solid doors and as doors with some glass. Corrosion resistance material important -preferably aluminum. Hurricane resistance as well.

3

I'm pricing a building that calls for a bi-fold door that will fit in a 70'x18' framed opening at one end wall. The wind load is 110 mph. Need the mazimum door that would fit in the 70'x 18' clear opeing. If I could get something back this A.M showing the framing and hinge locations so I can design my framed opeing for the loads of the bi-fold door I would greatly appreciate it.

4

preliminary cost estimates. I want either a 70ft x 20ft or an 80ft x 20ft door. I need a 130mph wind load as per code. How tall must the end walls be? Thanks for the info.

5

I am an Architect and a Commercial Contractor. Do you have info package for me that would include weights of doors and wind ratings for Hurricane areas. Am designing my personal residence ,and will build it in 2010. It will use your Hydraulic doors as operable roof panels.

6

Bonjour we intend to build an aircraft hangar soon we are interested in you bifold door dimension: 15m width * 4 m height question 1 what will be the dead height between the door bottom opened and the top of the door? question 2 is you door transportable by 20feet container question 3 could you supply plan and accessory kit but steel frame done locally? question 3 is it steel frame or aluminium frame? question 4 what about hurricane force wind resistance? is there a anchoring kit or reinforcing kit in such event coul you quote the different options best regards ps power supply in guadeloupe is 220v and 50hz

7

I am looking to replace the slide doors on a Chief farm building that was put up in the early 80s. The door is 24' x 13' roughly. I saw the hydraulic doors and was very impressed. My questions are: do they handle much wind while open? how can they be opened in a power outage? and what would be the cost of a complete hydraulic 24' x13' door system delivered to me and installed by myself?

8

Hi, I am interested in a quote for a 40' x 12' Bifold door installed in Northern WI. I am currently still acquiring bids on the building and need info about the header for the door opening if the building were to be stick built w/2x6 framing with engineered wood trusses. What type of header over door opening is needed, and what is required to be done for lateral support. I would also like a quote on the door, what other info do you need from me to provide pricing? Thanks

9

impact glazing for a tested and approved Dade County Hurricane installation

10

I'm getting estimates from Morton, US Steel and Banyan and a couple others. I want a ballpark price on a one piece hydraulic door 40 x 10 to attach to the end of a Banyan Quonset type bldg. Banyan is quoting the header and supports for the door. Door should be a bolt in situation. Hanger will be on the M. C. SC airport. Give me an idea of price and freight. Thanking you in advance. Austin C. This is a serious inquiry. And of course we have hurricanes down here, I don't know if this makes a difference or not. I'm from Wisconsin where we worry about snow loading. Down here they worry about high winds. Everybody has to have something to worry about, I guess.

11

Please send all information pertaining to stub column height, etc. for building design purposes. This new building has a 90 mph exposure "C" wind rating.

12

Need pricing for both doors. Wind loading is 110 MPH requested.. If at all possible need pricing today..Thanks

13

The building size is 100' x 100' x 20' the door size will be 55' x 16' and will be going in the left endwall. The building will have metal panels walls and IBC 2006 with a 90 mph wind load.

14

the door is in a wind area of 50m/sec (165feet/sec) On web site the higher wind ratings seem to be for hydraulic doors only. Is this so? Regards Robin U.

15

I am building in Diamondhead, MS. I am south of I-10 so extra hurricane protection is required. I am undecided on a bi-fold or single piece hydraulic door. Which is better in hurricane country. I also would like as much of the mechanics as possible...place as high as possible on my home. I also live in a flood zone...no sense in replacing all those parts every 2 years. Al K.

16

Please quote the following as soon as possible 6- 42x12 6- 45x14 6- 68x14 90 MPH Wind speed Cable operated

17

Please give me a quotation on a bi-fold garage door. Existing Design: One singe garage door and one double garage door. New Design: I would like to have one door for this space. I am interested in your product because it eliminates all of the supports hanging off the ceiling that hold up the door when it is open. The door must meed Dade County hurricane specs. I have original blueprints for the building if you need more specifications. Size of opening for one Schweiss bi-fold door: 346" wide X 8' high Please give me a price quotation. Thank you. Pamela H.

18

i am looking for doors for a pool house in colorado the rough opening is 40 ft wide by 16 ft tall.these must be hurricane proof

19

We are in the initial stages of a design of a hangar for which we are considering a Schweiss Bi-fold door. We are contemplating door dimensions of 11 ft clear height and 45-60 ft width. The door must be engineered for 130 mph sustained wind with C exposure. Given the above parameters for door height and wind exposure, at what width (between 45 and 60 ft), if any, is there a quantitive or qualitative difference in the construction of the door (e.g. heavier material, larger truss, etc). We may wish to design for the largest possible door (within the range specified) without having to step up to that design variation (e.g. material or truss change). We would also like to know approximate distance between clear height and top of the doors upper hinge. Upon receipt of your response, we will submit a request for a quote. Thanks for your help.

20

Need door 20' wide X 22 ft clear height rated for hurricane duty in south Louisiana.

21

I am building in Diamondhead, MS. I need a door that is 40' wide (finished clear opening), 14' tall (finished clear opening). I am undecided on a 1 or 2 piece door. I am more concerened about hurricane strength and longevity. If this works out, I may use these doors for a group (10-15) of hangars that I will build in & around Mississippi. Thank you, Al K.

22

This door will need to be wind rated up to 150 MPH, please.

23

I am hoping to find a door that can protect a 18' high by 36' wide opening. I am trying to cover some glass and get an approved door that can withstand 110 MPH winds on Cape Cod.

24

Need pricing information on bi-folds for commercial restaurant. 5 Openings - 10' wide X 7' High. Hurricane rating required, on coast.

25

Door size: 44 x 10 ft. I need the full 10 ft. so a hydraulic door is required. Need 150 mph wind for Florida Keys (Monroe County) I will add the finish (lapstrake wood and two windows) Attachement: Steel I-Beam Side supports: 16 x 16 concrete columns A local builder will install (he has installed several units on the field. Need delivered price to Summerland Key Airport, Summerland Key FL.

26

We've been asked to verify wind load resistance capabilities of the Bifold and One Piece doors. We've got a situation where the door (maybe a 30 footer) will have to take a hefty wind....and it will be operated at least 16 times a day...possibly more. See any concerns? Thanks for your input. Scott A.

27

we are working on a mega yacht shipyard buidling which will need a 124 ft wide x 75 ft high clear door to withstand 130 mph hurricane winds. we would like to get some design info to include with our building design plans. thanks

28

Need a price delivery on 45' x 16' one peice hydro aircraft door. Wind loads here require 130 mph. Also need to let the buiding manufacturer know how to support the door. So the weight and any special structural conditions.

29

Need 140 mph wind rating & engineering stamp for same. Building HAS ALREADY BEEN PURCHASED, WITH TWO SCHWEISS DOORS (one 50x30 and one 25x25, to be changed to this 25x30). Doors will be ordered once customer gets through permitting process. Thanks for your help on this one - I had to send the customer quite a few quotes myself! :)

30

140 MPH wind load. Also quote adders for remote control, window, and walk-through door.

31

we are looking for either a biflod or one-piece hydraulic moving door, 34'wide 14' high, to withstand windforces up to 175mph. Opening and closing times are crucial. Can you help?

32

Need a 135 mph wind load on this one, with Florida Certification. Oh, and... They are buying shortly! We'll be ordering two doors from you, a 50x30 and this one. Hooray!

33

46' x 16' opening 120 MPH wind load Special conditions - call me Need to see detail as to how your door attached to what kind of structure

34

You provided a 40' door for my neighbor. We are looking for a similar door, 45' x 14 x 24". If you have other recommendations, we are open to suggestions. Engineered to withstand 110 (county minimum requirement) to 120 mph winds [We live in Galveston County, Houston.]

35

I am designing a structure that needs movable walls,and I think your doors can do the job if you cuold give me more tech info, ; the door opening is 18'w x 8'h and the opening is in concrete, col. & beams 16"deep, the door mounting should be flush. 1.Is the depth 16"enough to support the mechanism and still have space for the door to remain flush? 2.When closed is the door designed to resist Hurricane strength winds? 3.Is the door vandal proof ? 4.does the door provide weather protection under normal conditions , No leaks etc.? 5.Can the door act as a temporary roof in locked position, for how long ? What do you recomend for isulation and iterior finish to have a wall look when closed? Thanks for your attention to thi matter . Each structure will have 3 doors ,and this is going to be a prototype to be repeated, if the price is right. Hernan R. H.

36

Price of a 36 foot wide 12 foot clearance bi-fold door for Texas coastal area.Wind storm area.

37

I am in the process of pulling a permit for a hangar in florida and the designer put your doors on our plans. DO you have Florida Product Approval #'s required for the State of Florida so that we can finish getting the permit from the county. This will be in a 120mph wind zone. Also what info do you need form the contractor so that he may start the order process on his own. I will forward your infor to him.

38

The Company Las Cumbres Global Telescope Network has an Observatory on Mount Haleakala, Maui and is in the proces of replacing the equipment doors with a bifold door. The door needs to be fully weather proofed, hurricane rated and insulated. This side of the facility is exposed to hurricane like conditions at many time during the year. The Observatory houses a telescope and optics with a value of approx. $10 million. Therefore it is essential that the doors are weather sealed and fully insulated. Please contact me to discuss. Many thanks in advance Mark E.

39

Looking for hurricane doors for my beach house. All the neighbors have the type that roll up. I was wondering how these compare in price (especially since these are DIY job, correct?). I have two openings that are roughly 15' wide by 84" high. Any assistance would be appreciated.