67: POST FRAME

1

TO THE PERSON THAT CAN HELP. I'M A DESIGNER AT SOUTHERN TRUSS CO. WE HAVE A 70' X 72' POST FRAME BUILDING TO BID. WE HAVE BEEN ASKED TO DESIGN THE END GABLE TO HAVEA 40' WIDE X 16'0" TALL HYDRAULIC BI-FOLD DOOR UNDER IT. I WOULD LIKE TO HAVE ALL INFO ON LOADS AND ANYTHING ELSE YOU FEEL I NEED TO DESIGN INTO THE END-TRUSS.

2

Delivery to Bismark North Dakota. Post frame bldg and some questions are what needs to be done to the end truss for support, what kind of weathersill is there? Door size is 40'w.17'h.

3

60x80x18 Bifold door in gable end post-frame building. Please e-mail me a quote.

4

35' x 18' Hydraulic door to be installed on the endwall of 18' post frame building Door to be insulated with foam friction fit no interior steel liner on back side of door single phase electric Please send required rough opening door dimensions and drawings Feel free to contact me with any questions

5

We would like a quote and cut sheets on Bi-fold doors. Two bifold doors, to be installed in a post framed building. 1 door = 16 foot tall and 24 foot wide 1 door = 16 foot tall and 30 foot wide Electrical operated door

6

Door side columns are 6x6 timber with a 3 ply 2x10 header above. Roof supported by steel I-beam above that. would like remote control and one man door (outside building facing in) on the right side and 2 to 3 windows across the front. truss on the outside of door bottom. would like to minimize impact of steel door frame on opening size but don't want to place on outside of building will remeasure and confirm opening size before final order thanks

7

I would like to get ideal how a Bi-Fold door would cost. I have a older hanger made out wood with tin on the outside. The doors that our on it is

8

I'm building a farm pole building and would like to install a 12' by 40' hydraulic door in one end, and would like to get a price. Thanks' George

9

We have a customer in  Mo building a post-frame hanger and has an opening 38' wide by 10' tall they need a door for. The building is 12' tall.

10

Please price me out a 25'x15' Schweiss Bifold dor for a post frame building on the endwall. the building will be 50' or 54' wide located in Elberion, Iowa. Also price out a 27'x15 Schweiss Bifold both to be strape type doors. Custeomer is deciding which size door to go with. Price with Schweiss Door installing and travel to Elberion, Iowa. Please email or fax the prices to me thank you,

11

Please call. I have a few questions about how to frame an opening. The two openings (between columms} are about 24'wide by 15'high. The problem is that the posts are not in a straight line due to the fact the center post is a different size than posts on each end. The building is 25 x 50 shed roof with the high side open( where the doors are to be) and houses a band saw mill

12

Please provide me with door data infomation sheet and pricing by no later than 9/11/09. each sidewall will have (1) door unit and I will design the building to accomadate the door size per loads.

13

I am interested in doing a 40 ft. bi -fold for a 60 ft wide machinery storage building for a prospective client. It is of pole construction or may be a fabric style building. I need options to present to prospect.

14

40' x 12' bifold door for a wood-framed hangar (post-frame building)

15

My company is building a post frame for a customer and he wants a bi fold in a side wall that is 32' clear opening wide by as tall as we can put in 18' sidewall. Please price this door and let me know how tall we can go. Thanks

16

We have a customer who wants a pole type building 36'x52' but he lives by a airport and the covenants say he has to build a hanger type building, He has to have a door 36' wide. He wants the wall height to be 14'.

17

45' wide by 32' deep post frame hangar 11'6" - 12' x 40' door Sidewall required for each? Header support options? % load for vertical jamb vs.header Auto latch extra cost? How many straps for 40' door? Equipment/personnel required for installation? Approx. cost for window/walk door in hangar door?

18

I would like a quote on a 40'x 10' door for a hanger building located in Warsaw Indiana. Door will be located in the end wall of a post frame structure.

19

I have a customer interested putting in a bifold door in a new building I'm selling him. It would be going in the gable end of a 50' x 104' - 16' Pole Building. The size Bifold he is interested in is a 34'w x 16'h.Please get back to me...Thanks Isaac M.

20

Need two doors quoted. The larger would have an air opening of 9' high x 16' wide. The smaller would have an air opening of 9' high x 10'wide. It would be possible to have a single, much wider door, instead of the two separate doors. 9' high x 28' wide, depending on the stresses involved. Building will be a post-frame building, metal-clad. I would want the door installed for me, by a contractor experienced in bi-fold door installatiion.

21

I have a pole building hangar and need a 44 ft by 11 ft door

22

Existing metal pole building. Opening could be up to 34 feet wide and 14 feet high, and I need a minimum of 32 feet wide and 12 feet high.

23

I am looking at adding a lean-to to an existing 14ft high sidewall pole building. The problem I am having is, the height requirement for normal overhead doors.With a bifold door typically how much of the door opening is lost? I am looking for a 12ft wide by 8ft high opening when the door is open.Would the bifold door help? Please send me a cost.Thanks Dave D P.S. Do you stock smaller doors for garages? Like what I am looking for.

24

Need two doors for a wood post/frame building. openings are 31'8 3/4 " and 23'7" by 18' high Looking at hydraulic doors and bifold doors What would you suggest for a door this size? Also need asap how long delivery time? Thanks Jim

25

Not really sure what i want or need yet but looking for prices if possible Looking at maybe a couple 14'x16' or around that and a large end door. building a pole building and looking to insulate sometime.

26

We are putting together a bid now for the project it is a 46'X160' long shop for a dairy farmer and he wants a two doors on each side to get his equipment in and out. I would like a quote on what you would do this for. it is going to be have metal sheeting, but is going to be built with wood posts and wood trusses. I am submitting this bid on Wednesday so I would like to know ASAP a rough estimate on what you could do this project for. Thanks, Clark W. Project Superintendent

27

Post frame construction contractor the needs literature to share with customers. Just a set or two will be fine. We will try to use the site as much as we can but it would be nice to have hard copies.

28

i have got a post frame building with a door hieght of 18 feet and width of 72 feet. is it possible to span this with a hydraulic door?

29

I've decided to construct a building on my rural property, initially for some equipment storage. Ultimate use will be for a hanger though and I want to make sure I plan it accordingly. What I need at this time is engineering load data sufficient to spec out the opening truss. The overall size of the building is 42' 8" wide x 48' deep. The door opening is 40' clear x 14' high. The structure will be 8x8 posts on 12' centers supporting 8x16" beams that the trusses will anchor to. I'm assuming that the door opening will have a second post on each side framing and supporting the door and that the support truss will be either double or triple units. What I need to provide to the designer is load data for your most restrictive/heaviest door system so that I will have no problems in the future. I would appreciate this data as soon as you have a moment as I will be departing on a business trip over the weekend and would like to resolve any questions the engineer may have before leaving. Thanks. Bob S.

30

Our current Schweiss hangar door works fine - never a problem. We are designing a larger building for a neighbor (Mr. Mark J. - Goldendale WA) and believe we will construct a pole building with a clear opening of around 44' wide and 20.0' from finished floor to bottom of truss. I'm inclined to go with Schweiss but want to avoid the mistakes we made in the previous building structure... Could you have someone give me a call? I need to talk about truss and building designs. Thanks, Doug H.

31

We are a manufacturer of postframe buildings and we would be interested in getting a price sheet on your doors. We are getting more of a demand for bi-folds and would like to try to do some busisness with you since you are fairly close to our area

32

Retrofit my hangar. 40x40 pole building with standard wood trusses. Currently has a 9 foot truss hight. I plan to raise the roof about a foot, or convert the trusses to a sissor type for more head room. Can you build a hydralic or bifold full width door with the top corners cut to allow for roof line overhangand still maximize opening. Thanks, Dick J.

33

Hello, I would like to speak with someone about pricing a 50'x 14'0" bifold door with wind rails to be installed on a new post frame building(truss in endwall) I'll look forward to hearing from you. Brady N.

34

price bifold and single panel hydraulic door for end of 42x60 foot pole building hanger. Building is supposed to be started next week. Thanks.

35

The current door has round pole jambs that will be removed and replaced with members of your choice most suitable for the new doors anchoring.

36

will the hydraulic door work on post frame construction?

37

Do you have installation instructions for attaching doors to wood post frame buildings, can you send them to me. Thanks Alan

38

We are builders of post frame buildings. We have a customer who is looking to build a 72'x80'x18' airplane hanger. He is looking at putting on a 64'W x 16'H hanger door on the building. I need to know if your doors can be used on a post frame building? If the can then I need to know the price of the door both bi-fold and hydraulic. Thank you Leonard A. Sales Rep

39

building a 50wide x 40 hanger. Building will be wood post frame with metal siding. Need a 45 foot door. Any help you can give with detailing for door mounting would be helpful. What is the weight of the door at the hinge attatchment to door header? Also approximently how much force will exerted at the attatchment point of the hydralic cylinders?

40

Sales team, I am quoting a post frame airplane hanger to a local city airport and I need a price on a 50x14 bi-fold door installed by your crew. I had your company install some a number of years ago for other of my clients and all went really well. This is the first of what sounds like a few buildings they will be adding over the next couple of years if they can get city approval etc. We are in the early stages of planning right now. Please call if you need more info. Thanks Sheldon S.

41

This is a 36 foot by 150 feet long shed with a 6 foot over hang ,30 foot free span in side of post(6X6) 14 feet high ,bottom of roof truss. My door will have to be 30 feet long and 14 feet high give or take a little. Reguards, Bruce H.

42

I have a customer who is interested in a post frame building 50x50x12 with a 48x10 hangar door, He has a schwiss door on his existing hangar and wants us to quote this building with your door. He has the strapped system and wants it as an option on this application as well.

43

Wanting price and headroom requirment for 45'x 16' bi fold door, to be installed on gable end of post frame building,,,,also would like some info on the door . I will be at the office all thursday. Thank you, Rich S. Post frame sales JDL Longho Inc.

44

planning on building a new post frame hangar at my farm airstrip.looking for the best buy on a bi-fold door that I could cover with my building siding,and would most likely install door myself.

45

I am bidding on a post frame building and have had the customer ask about a hydra-lift door. I need to talk to some one about this have several questions. Thank you.

46

Building aircraft hanger 60' wide by 102' long by 14' high Door will be in one end wall 50'x 12' need price for door & extra bracing needed for Post Frame & Steel Building.