66: SLIDING DOORS

1

looking to upgrade a 30' slidding door to a bi-fold or a hydraulic door on our shop. please send any info. on this application.thank you Curt Jade

2

Estimated door opening is 14' high x 24' wide. In the beginning stages of replacing sliding doors.

3

I have a question about a single sliding door, The Co. director want a single sliding door for a existing building, the opening is W=51'8" H=16'2" Is this possible?

4

Hello, I am interested in getting a price for a bi-folding door to replace an existing sliding door. The inside finished dimensions are 15' high and 59' 1/2" wide. Thanks, Perry

5

would like a price on a bifold door there are rolling sliding doors on the the building now opening is 14 by 30

6

I plan to replace existing sliding door with a hydraulic

7

Hi I'm looking for a hanger door opener for a large hanger with sliding doors. Do you have anything of the sort? Thanks Bryan

8

We are needing to replace our shop door on our Morton building, presently the door is the original 2 piece sliding door from Morton. We have serious head room issues already in the shed and cannot afford to loose one inch of space that way. I was wondering if a free standing header on a sidwall will work if it goes above the roofline, and how you address water and snow coming off the roof if the header and door go above the roofline. Thank you.

9

Looking to replace a 27' by 15' sliding door on a Morton building

10

I have a client who wants a pocket door for hangar in Hobbs New mexico 76'x18. Do you have pocket doors?

11

I have an old cheif steel building that has slider doors on it know it needs to keep its headroom height the opening is a 30x15. We would be up for either a bifold or a hydraulic whichever would accomodate us the best. I would like to know the price installe by your installation crew.

12

I have sliding track doors that face the south. I would like information about wind load and also price on your bi-fold doors.

13

Julie This door is the one that you quoted for Ian F. I require a price for a fore frame to add to the front of the building as the existing building does not have enough headroom on the ends. There is also a 24" high concrete foundation wall that we could fasten to on the bottom as well as opening up the middle of the front wall and attaching to the existing rafters. They have an existing sliding door now.

14

Hi,I have an existing 50ft x 60ft hangar with a 45ft wide opening for the door. I currently have 4 sliding doors that don't work all that well. Is is possible to add one your doors to an existing building? If so, how do I go about it? Thank you.Ian F.

15

We have a wood frame metal building, with a 26'w x 13'h opening, currently with double sliding doors.Interested in replacing them with a bi-fold door. Do you have an installer in the Oklahoma City area?

16

I need to change a sliding door on an older T-hanger to a bifold or hydraulic door. The opening is 11'H x 42' W. Please supply costs for both. I need a innexpensive solution. Thank you, Michael

17

I got a pole barn with a slider on the side and I'm going to put heat in my building so i want a better door.

18

Are you able to automate already existing doors? We ahve just erected six aircraft hangar doors. They are sliding doors. Dimensions are: Height: 7m width: 5m weight: 1500kg per door. Thanks Knoble

19

I need a quote to replace slide doors, endwall application, opening is 23'7"x15'8". Building site is Monmouth Il, 61462. Can you quote it installed or is it only delivered to job site? Do we lose any height clearance with your system?

20

Looking for a door to replace the sliding doors on the end of my shop, without losing any headroom. Must seal well and be well insulated. Side door columns are 6X6 wood.

21

I recently purchased a 90 foot wide hangar with two 42 foot sliding doors. It is designed to be able to accept bifold doors. I am estimating the doors are 15 feet high. Roughly, what should I expect to pay for 42X15 foot doors if I decide to upgrade to either hydraulic or bifold doors. Jon F.

22

I HAVE HANGER THAT HAS 4 SLIDING DOORS I NEED RUBBER FOR THE BOTTOM EACH DOOR ABOUT 16FT LONG HOPE YOU CAN HELP ME THANKS JOE D.

23

I am renting a existing older building it has the old sliding barn doors that split in the center and slide each way. These doors would be alright for a barn but not a truck shop. They are drafty and don't seal the elements out. They have a problem with snow build up and are hard to open. Can I put one of your doors over the existing opening with out losing any head room. THS. Gene G. G F. O. Services Inc.

24

Mike- I found your website interesting. I was looking for a sliding door for my basement project and your site popped up. I enjoyed reading about the history of your company. Maybe we can get together for a beer again sometime. Merry Christmas to you, your wife and family. Doug S.

25

I am looking to replace a slider door. Building was built by our local lumberyard in 1981. It is a North door opening and the doors can be very hard to dig open in winter months. The building is a 6"x6" wood pole building on 8' centers 40'x80' The dimensions are close approximations as to the door opeing. I have checked into overhead doors but they would like to frame the door in and lose about a foot of headroom.

26

building 10 years old concrete floor fully insolated need doors on 1 end and 1 side side door has I beam across top end does not we are using for shop sliding doors have tomuch heat loss

27

I have a metal hangar with 4 sliding doors, about 40 feet wide. It has an I-beam supporting the existing door tracks. It's about 20 years old with some rust. Can you give me a range of what it would cost to replace? I'll get exact measurements if the range doesn't scare me too much! thanks, Mark

28

THERE IS A SLIDING DOOR OVER THE OPENING AT THIS TIME. CAN THIS DOOR BE LEFT OPEN IN THE WIND?

29

I need to speak w/ a representative ASAP about a possible long term business relationship. First and foremost, I have a customer actively searching for door. Our sliders for that particular model are not big enough to accomodate her airplane. She has solid, corrugated steel endwalls and she would like at least a 10'HX40'W door system. What are our options? It is a quonset, 54'WX15'H in the center. We may consider somethin possible automatic as she wants something easy to open as she continues to age. Please email me or call me as I would love to discuss options and, of course, pricing.

30

I have a 50 x 100 metal building with a framed opening of 24 ft. I need to install a door in this opening, although it will be operated only occasionally. I have been told that sliders will not work. Could you tell me if a bifold would work here and if so the price. I do not have electricity at this site.

31

I have four openings on a farm equipment building that we want to replace the hanging sliding doors. Two openings are 38 feet wide x 12 feet tall or option for five additonal feet to the bottom of the joist. The other two openings are 18 feet wide same height. We need an option to have at least one man door in each opening and an option for an opening wide and tall enough for a pick up track to drive through. Thank you.

32

I have a 11'3" high by 36' wide opening with 9' post spacings. I originally planned for 4 sliding doors but wonder about your bi-folds. It could be 1,2 or 4 seperate doors.

33

I am bidding repairs on a 50 year old hanger with sliding corrugated doors that are in horrible shape. I just received an astronomical bid for making the existing doors work, and began to think that maybe installing new doors would be comparable. currently we have two openings that are approximately 70' x 20'. the job is in Southern California. thanks, Les

34

I would like to replace the 3 piece sliding doors on my hangar with a 40' bi-fold door.

35

Existing Hangar. Replacing Quad sliding doors. V35B Bonanza hangar sizing. I will have to get exact measurements. Who can install in this area of Southern Illinois?

36

We are looking to remodel an existing building that is about 25 years old it is 55x100 with 14 ft side wall it has an existing sliding door 25x14 What additional modifications would we nwwd to consider?

37

We are looking for an economical replacement for old sliding doors on hangar.

38

I have a hanger with sliding doors now. I need a quote on a door wirh a 45ft opening and 10ft height.

39

Do you manufacture a sliding door for a light aircraft box hangar? A group of pilots in Missoula Montana are looking at hangar structure options, and plan to build 6-8 units this summer (2008).

40

residential use. replacing heavy sliding door or wood (cedar) and metal construction. Prefer remote/electronic opening mechanism

41

I own a 50'x100'x18'6" WedgCor Modified U Arch building on a 2' stem wall. The shop currently has 27'x14' sliding doors. I want to enlarge the door to 27'x16' or 31'x16'.

42

I would like information and prices on replacing the sliding doors on my shed. The current door is 24' wide by about 14' high. I may retrofit and put a wider door in if I replace what is there. The shed is 48' wide. I might go to a 30 or 34 wide door.

43

we currently have a 30' x 16' double sliding door. The doors are very heavy to operate manually. We are looking into the possibility of installing a one-piece hydraulic door to limit the loss of headroom. We can only afford to lose 12-14" of headroom.

44

I am looking for a door to replace sliding doors on a Roundtop building. The door opening is 14' 6 1/4" high and 20' 2 1/2 wide.

45

Looking for a door to replace muliple wooden sliding doors in a garage operation opening is 39" wide x 15'5" high.

46

Oak Forrest Condominium has 17 door openings of approx. 11'-10" wide x 5'- 2" high that need replacement doors. They are for electrical panel rooms that are not deep enough for a kick-up/roller dr./sectional, etc. The top sliding doors there now have disintegrated over time. Perhaps you would have the answer?

47

Do you have a hydraulic closer for a sliding door for domestic building to satisfy swimming pool safety requirements?

48

We are looking a high quality sliding folding door ,electrically operated by remote system ,made of wood or steel ,powder coated finish for a multipurpose hall. clear opening width is 16.80 mtr and opening height is 7.00 mtr. We would prefer to have quote with techncial details,bochures etc.

49

I have a 14'tall x 17 wide' opening in a wood barn that I roll a R44 helicopter on a landing pad in. Total height of the r44 on the pad is 13'2". Currently I have a sliding door (wood) installed. How much space at the top would I lose with a bi-fold door? I would like an estimate on both a bi and a one piece, white, metal, insulated.

50

Just getting thoughts. we re roofed the barn this year and the back sliding doors need work, hard to catch me home so a cataloge with prices would be nice.

51

We need to repace a sliding door on a old post and beam warehouse with metal siding. Do you have an installer in this area?

52

Looking to replace sliding doors on a goodon pole building about 5 years old. opening is 35 or 36 feet wide and 16 feet high. 18 foot sidewalls. need a price installed please. Daryn

53

Have a concrete block building with sliding "Barn" type doors that are failing. Need them replaced with something better.

54

Need pricing for (2) 24' x 12' sliding doors with chain hoist.

55

this hanger has two doors, one is 90' 16' high and has 5 sections. the other is 76 feet and 4 sections. these are sliding doors looking for electric openers

56

We have a customer that has two hangers that need door replacements. These hanger were built in 1945 and existing doors are multiple sliding doors, that don't work. The two openings are 16' tall and 60' wide. What are our options in replacing these doors? The structure will not support overhead supported doors. We would like to stay with 16' clearance if possible. Once we decide on door type we will need pricing.

57

I HAVE 2 10 FOOT BY 10 FOOT SLIDING DOORS. I AM LOOKING TO REPLACE THEM WITH A BI FOLD DOOR.

58

I am looking for an old metal fire door on a sliding rail system to install in my loft space. Any idea where I might locate one of these? Thanks

59

Looking to replace sliding doors on an existing structure

60

I want to replace sliding doors with bifold on existing hanger in Roanoke TX (door about 50' X 18'.) Also am building another hanger in Rhinelander, WI in the fall. This door would be about 45' x 16'. Would like est'd pricing on both doors as well as info on installation. Do you do installation? etc. Thanks, bob

61

I have an 11 foot 8 inch tall by 18 foot wide opening on my machine shed that has old sliding doors on it that I want replaced. I would like an estimated cost for replacing them with either a bifold or hydraulic one piece door.

62

I have an old Barn with sliding doors and wanting to replace with garage doors but do not want to lose head space.

63

Door opening size is 20 feet wide and 13 feet high, on steel building. Has side sliding doors now. Want insulated door to replace existing.

64

We need to replace our sliding doors with an insulated door. Our opening is 24'1" X 14'8". Please email a quote on the one-piece door. We don't want to lose any height of our opening. Thanks.

65

I have a storage shed with a 16' tall x 45' opening. I am wondering what the price would be to enclose this with a large door. (door only I won't need to reinforce the building) I am open to suggestions. My friends have told me to put sliding doors but I can see the advantages of folding doors. Thank you, Chester S.