62: SHOP

1

Here are the Behlen shop drawings for this project. Please email reply to let me know you've received. Doors will be hydraulic and bifold doors. Thanks

2

I visited with a sales rep on the phone on Tuesday about getting a price estimate on a bi fold shop door. She said that I would have the estimate later that same day. It is a 24' insulated bi fold with  straps on the end wall of a 16' high building, I want to maintain a 16' clearance if possible.Thank You,

3

looking for a 30' or 40' wide door for a new agricultural shop building. 16' tall. what is the best option? Bifold or Hydraulic? Costs?

4

Wondering about a door for a round roof barn. Looking for a 14 ft tall, 20 wide. Just give me a ballpark, doing some looking wondering a comparison to a overhead style insulated door. thanks brian wendinger

5

I need a price on a top door seal. The one over my door is split. I bought the hanger 15 years ago. The door is 40 ft wide so I'll need aprox 42 ft. The door is a schweiss.

6

This door is replacing an existing Door. The trusses and header on the building is already built for a bifold. The current door is going to be moved to the other end of the building and we want a new modern door on the opening that we use daily.

7

Have 40 by 60 shop with 14'x24' opening need insulated door with max. height clearance need info on how to measure for a order and ruff price

8

This request is for a temporary facility while ourshop is renovated, we want to go as cheaply as possible.

9

for insulated shop. 

10

Hello - my hangar door is approximately 13 years old and I don't have the original door manual. How do I adjust the upper "off" setting? I want to stop the door sooner, rather than it going up as high as it presently does. There is not a limit switch ass'y as shown on your web-page. Thank you, Rick j Molnar

11

I HAVE A CUSTOMER WHO BUILT A SHOP 32'W X 12'H AND WOULD LIKE TO EXPLORE OTHER OPTIONS OTHER THAN SLIDERS. HE IS INTERESTED IN GETTING A QUOTE ON A BI-FOLD DOOR, SO HE CAN OPEN THE INTIRE 32' AT ONCE. IF YOU COULD SEND ME SOME INFORMATION AND A QUOTE IN THE MAIL THAT WOULD BE WONDERFUL. IF YOU HAVE ANY QUESTIONS PLEASE CONTACT ME ON MY CELL THANK YOU ALBERT

12

I’m designing a hangar/shop and need to know how high the eaves must be for one both your bi-fold and one-piece hydraulic doors. I must have an opening height of 16’ in order to provide the necessary clearance. Can you provide me with that information along with a basic quotation for each door type? The opening will need to be 45'x16'. Thanks.

13

We have a 63x14 opening on a red iron hangar, we have stack doors now and were wanting to be able to put Air Tractor 802A inside.

14

I am remodeling my shop and have limited head room. I am looking for an insulated door to give me the most head room available. my door way is roughly 18'6" wide and 11' 7" high.

15

We are planning on building a bigger shop. We will probably need a door about 32 ft wide by 15 ft high. We are just looking for a ballpark quote right now We are actually going to be walling in an old equipment shed 132 x 60

16

I have an old barn that I am converting into a workshop. I am installing a new overhead door. The size is 15ft high and 24ft wide.

17

I'm building a new shop , please quote a 30x18 door. If you could give me hydraulic door prices, and bi-fold price.What framing requirements do I need?I hope to start construction this month.Thank you Paul

18

I am remodeling my shop and would like a new door. One of the reasins I'm condidering a bifold is the option of having a walkout door in the overhead door. When you give me a price I want a walkout door and windows. Thanks Bruce R.

19

I'm interested in a hydraulic door for my shop. Please call me

20

I am going to build a shop. I am intersting in knowing the height of the door opening left after the bi fold door is in the open position. The side walls of the building will be 20 ft. and the door with will be 45 ft. wide. I also want the door insulated, and to be a strap style with remote door opener. The bottom truss (if any) would be put on the inside. How much time do you need to make the door? I live near Jamestowwn North Dakota. Thanks

21

I am looking at different door options on a shop that is still in the planning stages, to be built this spring. i am considering all options on a 30 X 16 foot door and a 18X16 foot door. I do like the look and simplicity of your strap bi-fold door and would like to talk to you about my project.

22

Looking for a door to put on a shop that we have slinding doors on now. The width is 20 feet and the height is 12 feet. Need to know if you install them to how much that would be. Thanks Steve

23

looking at building a new shop, putting cost together, would like a quote, thanks glenn

24

Looking for interior door 10ft wide x 8.5 ft high to separate heated shop area from un-heated garage area. Finish can be plywood or similar. Is a integral passage door possible mounted into the bi-fold? Would like approximate price & delivery. Thanks,

25

I am building a shop at my house and I am exploring different options for the main door. Head room inside is of concern to me so I would like to see how your bi-fold doors compare to roll-up doors. Thanks, Steve

26

I am in the process of designing new shop. Haven't decided on material, am looking into ICF. Also looking into solar panels, would it be possible to mount panels on the door. TIA

27

I would like information for a small hydraulic door for a shop, 12 by 12.

28

Looking for a no head room door to put on my work shop. i would also like a quote for a couple differnt widths for 20 up to 30 feet wide

29

I currently have a 63' x 90' shed that is half shop and half cold storage for equipment. My plan is to make entire building shop and build additional cold storage. The problem with this building is that it has only 13'6" inside ceiling height. When we start revamping this building, I am very interested in replacing the main entrance door (currently 27') with a bi-fold or hydraulic door. I CANNOT afford to lose any head space!!! Do I have any options with your doors?

30

Hi- I need a 12'w x 14'h bi-fold door for my blacksmithing shop. The shop is heated and winters here are cold, so I need an insulated door with good perimeter weather seal. Thanks, Marc

31

I'd like to understand the cost and applicability of a bifold door for a shop I've constructed. The door would be approxiamately 9' wide by 9' high. The buliding is frame construction with rough 2x6 studs, approx 15' ceilings spanned by 14" trus-joists. The opening for the door is framed with a 10' header composed of 1 12" paralam (1 1/4 ") and 2 pieces of rough 2x12. The header is at the top of the wall just below the top plate. I need to lower the opening height to finished door size so I need to understand the installation and framing requirements as well as finish detail.

32

I spoke with someone a few weeks ago regarding the hydraulic door installed on our shop the latter part of June or first part of July. We requested a letter explaining the work that was done to reinforce the construction before the door was installed. It was not strong enough to support the door as constructed. In fact David reinforced it even more. We have not received a response/letter regarding this request. I am sorry to say I do not recall the name of the person with whom I spoke. We would still like to receive this letter. Thank you for your response. Rose H.

33

Prices for shop doors

34

I'm building a new shop. The building is 60x100x20 all steel construction. Will have (2) 20x17 doors. Would like price on bi-fold with lift straps along with the auto latch and remotes. Thanks, Doug

35

I am constructing a new shop and would like a quote on a bi-fold door: 20' high x 24 -26' wide. Please have a sales rep call: Marie B.

36

I'm intrested in a set of 3 x Bifold Doors for my garage/motorcycle shop. The opening are 8' x 8'. I'm interested in your ability to build these with windows (like an old service station door). I look forward to speaking with you. Thanks, Cliff

37

Looking to build a large shop. need some quotes.

38

Looking for door for shop. 14ft wide-11ft high-please send info and prices-I will install it myself. thank you-CW Seaman

39

I am converting a pole building into a heated shop and want a price on doors for a [ 13ft.h] [15ft.w] opening.

40

I was looking for a price on a door for a new shop that I'm going to build this summer. Would also like a list of dealers in my area or do i buy direct .

41

I am interested in a bifold door for a shop. I will need a 40-18 or a 20-18.

42

Hi I am looking for 2 Up/Down/Stop Switches for 220 current. I have the rest of the materials, although your doors look great. Next shop I build I will definitely look you up. Jay

43

I am looking for a 24' 16' door for a shop

44

I am cosidering a bi fold door for my shop. The measurements are 14' 18'. I am curious about price. Any help in this matter would be appreciated. thanks Russ

45

I am converting an exsisting shed into a shop, I would like to get an estimate on a bifold in order to save some clearance. The door opening is 14 x 20, would like to have it insulated, two windows, and a remote opener. Call if questions Thanks, Doug

46

we are looking for doors for our shops they need to be 45' tall and up to 45' wide.

47

would like to know the price of a 40 ft hydraulic door for a shop, and if it is insulated or not. If there is a more economical size, would like to know that also. Thanks, Steve

48

looking to change door on shop would like to know if your door would work for us and be afordable

49

1. I'm looking into building a 30'x50'x14' shop. What would be the tallest and widest bifold/hydraulic door I could install in the 30' side. 2. Can you give me a quote also? 3. Are these doors completely water proof?

50

looking for a price on a bifold or hydralic door for a shop with a10ft by 10 ft opening

51

i would like to get some information on the bifold doors what i have in mind is 20 to 30 foot doors for the shop and some 14 to 18 foot doors to my shop is a big nice shop thanks for your time on this matter

52

Interested in a replacement door for my shop. I would like some info on the new hydraulic door.

53

I contacted your company by phone on Friday,December 21, 2007 and requested a quote on a bifold door for my timberframe shop. I believe I spoke with Jeremy but I could be mistaken on the name. I am following up with the specifications that we talked about. Door size - 12' high x 12' wide Wood frame building with 8 x 8 side posts 4 x 6 header Steel angle or C-channel will be applied to back of header and posts for additional support 3/4" pine tongue and groove boards will be applied to outside and inside of door with 2" of foam in between. This will require "flanges" on inside for nailers for some of the boards I think. Request a sealing kit to make the door weather tight.

54

Planning to build a shop, would like an estimate on a door. The building is planning to be 48'by 50'.The door size would like to be 15' to 16' high and 22' to 24' wide.

55

I am looking to put a door in my shop. I believe the opening is 24'w X 14'h just trying to get some ideas on what to do. I am trying to estimate the cost and would like a rough estimate on a hyd door and a bifold. Thanks, Ryan

56

I have been looking at your web sight and I like your bi-fold door with a walk in door in it, and the strap lift. I want to replace the old sliding doors on my work shop. The door is on the south end of my building and we have no wind break so I want a door that can stand up to our strong Ks. winds. My building is wood framed and is covered with coragated galvanized tin. The door is approximately 21 foot wide and 13'6" tall. I would like for you to tell me approximately what it would cost to replace my door.

57

I am in the planning stages of building a shop starting next spring/summer looking at 20-22'X40' door. You can just email a rough quote at this time. Thanks

58

I have a shop 72'x36' with 14' eaves. It has three doors on a side wall. Pole construction with a concrete floor. Two doors are 12x 14 on each end of the sidewall and a center door is 24x 14. each of the doors are framed with 6x6 poles. The center door has a laminated header.

59

I am considering replacing the door on my shop. The door measures 17'3" wide x 13'4" high. Please E-mail me an estimate on a hydraulic door. I do have limited headroom in this application. Thanks. Tom M.

60

I am thinking of replacing the door on my shop - it measures 12'high and 24'wide. Roughly what is the cost for your bifold doors? Thanks - David R.

61

I am looking for a door for my shop and was wondering what the price would be. It is 12' high by 16' wide with windows. I would also like an opener. Please email me back as I am at work during the week. Thanks

62

to julie i talked to you yesterday about a 24 foot bifold door for a shop. you where going to fax me some info my fax machine is down go ahead and email me the specks also how are the doors insolated? 24 x 18 door concrete building with styrfoam forms

63

building shop with 4-14'x14' and 1-20'w x 14' h doors. One of the reasons for bi-fold is, I would like a clean interior ( no tracks ). I would like to face the door with wood to match blg. Operable dual pane windows. Can the operating motor ect. be at the top of the door for a clean appearance inside at eye level?

64

I have a 25' x 30' shop, with a 19' (inside) vaulted ceiling that I want to keep clear/open. The door opening is 18' wide x 8' tall and I'm interested in a price for a "one piece" as well as a bi-fold door from you. Please include a price for turn key job as I may not want to do the installation myself. I live 20 miles north of Dallas. Thank you. Ed D.

65

BUILDING A NEW SHOP AND I AM INTERESTED ABOUT YOUR DOORS. ONE DOOR 14 HIGH BY 24 WIDE. ALSO, COULD I GET INFO ON THE DOOR AND OPENER PRICES AND SHIPPING. THANKS FOR YOUR TIME, DENNIS

66

Sirs: I am building a shop/studio with a 10'w x 8'h garage door. Do you manufacture a bi-fold, sliding (2 five foot sections), or single opening door in this demension? The shop will be on a slab. I do not want an overhead door because it will conflict with my 1 ton lift mounted on an I beam crossing the ceiling. Thank you. Sincerely, Charles W. B.

67

I have a customer that needs a garage door (18'x8'). We cannot install a regular door due to a car-lift inside the garage. Our options are a one piece hydraulic system. We can manufacture the door itself, just need everything else. Can you give a rough quote provided what little info I do have right now? Thanx, David

68

would like a quote for a 90 ft by approx. 25 ft H your basic door and a 55 ft by 16 ft h with installation also You put the door on our shop in Casey Il and we really like it. Getting quote for robinson IL thanks howe

69

Iwould like prices of the doors I don't know the size off hand call me.I seen te doors a place of business and i like to see about putting the doors in my shop.so i don't loose any height in the shop.

70

I am renovating an existing building into a small shop and were wondering about one of your doors. The opening would be appr. 8ft. high by 12ft. wide. If you could quote me a price, I'd appreciate it. Thanks

71

need price on shop door 24x14.5 insulated/windows

72

I am designing a shop/garage for a client who would like to have the ability to build and work on planes. The preferred dimensions are 60'x 40' with the large door on the 40' side. Is a door approx 36' x 10' large enough for small planes? I would like to talk to a Rep from your Co to discuss some of the design issues etc. Also I am requesting some product lit. Many thanks, Pat R.

73

I am remodling a barn into a shop. 36w x 60l. On the end wall the opening will be 24w x 15h.

74

Am designing shop (120x70) will need three large doors, 14',24',36' x 16' or 18' height. Interested in pricing. Gary

75

We are looking for a door for a new shop that is almost complete. The other contact is Mark B. He is the one that has final call on the buying of the door.