57: QUONSET BUILDINGS

1

I have a Quonset hut building with a 12x12 door. I would be interested in the price of a hydraulic door, outside installation, and galvanized sheeting.

2

To be installed in wood framed Quansot style shed. Only needs to be a bifold door

3

Got a Hydraulic door from you in 2009 (Great Door). Would like a price on your Bi-Fold - size is 14' High by 42' Wide. Door is going on a round roof building that is 20' High by 50' Wide, that is measured from out to out. Will need door and frame.

4

I am looking for some pricing for a bifold hangar door. I have a 50 ft end wall that is open and would like a door for it with an opening of 12ft. the building is a open span 50 by 50 steel quonset A frametype. the door will have to be self supported/free standing as i cant hang or pull on the existing structure,the floor is dirt- would a couple of cement piles be enough to hold the door in place? I do not have power to the hangar but a 12 volt system would work nice. thanks

5

I CALLED FOR PRICES ON ONE 30 FT WIDE 16 FT TALL ON THE END OF A PREBUILDED ROUND TOP . IT LOOKS LIKES 2 5 ON YOURS WEB PAGE ROUND TOP. I WOULD LIKE PRICE ON HDY AND BIFOLD. WITH OP OF 1 OR 2 WINDOW OR MAYBE A DOOR 3FT WALK AND PRICE OF OPENER CONTROL.

6

Good afternoon, Would it be possible to have some kind of "ball park" quote given to me for a hangar door approximately 42' by 12'. It would need all frame work because the doors we have on now are on a 1947 Quonset hut that has four 10' doors that are on a free sliding above door rail with no bottom attachments.Please quote both a single swing out door and a bi-fold door please.Thank You, John Airport Mgr

7

I have a 50 by 100 Marvel Brute quonset with a 14 by 24 ft opening , it now has a double slider on it, I am looking for the price of a bifold door with a walk door in it .

8

This would be a door for a round roof quonset building.

9

I have a round roof steel building. opening is 18 x 40. I need the door to open 40 x 14.I would also need the free standing door frame.Can you send me a price. Thanks

10

I HAVE A ROUND FABRIC COVERD BUILDING NEED A PRICE ON A BIFOLD DOOR

11

Need quote on bi-fold & hyd.one piece door 40'x12, this is for a metal american steel Q style building.

12

I am constructing a prefab steel building mfr by American Steel. It a free span made up of a series of 21 steel arches. Size is 40' wide by 43 feet long and 18' at the ridge. I am interested in a door 18' wide by 14' high. The overhead clearance on each end of the door is 14'-6.30". IS THIS CLEARANCE SUFFICIENT FOR THE DOOR I WISH TO USE? Can you incorporate a narrow walk door in this unit as well as a window arrangement? Any order would include the frame, and strap lift arrangement. I will furnish the door skin and walk door and windows.

13

I'm interested in putting in one of your shop doors in a Quansot building. It was a old onion warehouse we are using for equipment storage. Currently there are homemade swinging doors (three) they are each about 12' wide we would like to put in a 20'wide door approx 14' to 16'high we would need to make the opening as the current doors are only 12' wide. could you give me some sort of price and time frame.

14

I need a price on a 28'wide x 16' Tall door for a new building and one for a behlen curvet same dimensions of doors

15

We have a quanset with sliding doors but we have so much trouble keeping the pigeons out as like to keep the doors open so it stays dry and clean. Need some ideas. Thanks.

16

I am considering putting one of your bi fold doors on our new equipment shed. It may pose an interesting challenge as it is a cover-all brand hoop building. It will have to be mostly self supporting. I viewed one recently and I think I know how to arrange the concrete and so forth to make braces going back into the building. I would like a qoute for a 35w x18 a 30w x18 and 25w x18 we are in Newton Il (SE IL)

17

I am looking for a bifold door for a round roof Behlen building. What will it cost? Lowell

18

Wooden quonset building, the second door is slightly smaller, but I don't have exact dimensions on that yet. I can possibly come pick the doors up if they will fit on a 17' car trailer. I am currently in the process of tinning the shed, should the opening be tinned before the door is installed or is there anything specific that will need to be done to the opening before the building is tinned?

19

THIS IS A DOME STYLE METAL BUILDING WITH A SCHWEISS DOOR ALREADY IN ONE END. I WANT TO PUT A DOOR IN THE OTHER END THIS MAY REQUIRE SOME TYPE OF DOOR FRAME. DOOR WILL NEED TO BE ABOUT 38' TO 40' WIDE AND HIGH ENOUGH FOR SINGLE ENGINE CESSNA. THANKS MORRIS

20

Looking for 28' x 26' quonset second floor with open end for maximum sets of 6'-0 x 6'-8" sliding glass doors, R-30 factor roof area and R-19 side wall. What would be the most economic method or system with interior estetics? We are trying to be green, solar and photovotaic TD

21

Hi, Please contact by email. How much are your bifold doors to give me a 44' opening? I am looking for the delivered price. Also, how much time from the time I order until delivery. Thanks! Also, curious how much would cost the one pice door in the same size? The building style is a quenset hut, so the door needs to sit in front of the building, but attached too it for strength. ALso, the size estimates is 44' by 12', but it is not exact if you have a door size close to that instead. Erik

22

Please to coat on options 1-2ea 10'Wx8'H optionbi-fold. option 2.-2ea of previous +phase two, two each 12'x12'bifolds ,and option 3.-1 each 10'WX8'H. F.O.B.86337 tese will be 1-2 each 8x10 for entry exit of gedescic dome 54'DX84'L phase two will include q-hut 50X100 building incorporating visual integration in N. Arizona plase advise on fenestration and insulation options. Thanks Chris

23

I am interested in obtaining a price quote for both a Bi-Fold and one piece door. I have a round roof Pioneer Quonset style building that currently has a 24' wide by 14' high sliding door system. The building was erected in 1998.

24

Do you have representation in Citrus County Florida? I would like to obtain a quote for my quonset style hangar for a Bi-fold door verses the current slider doors. By the way I am in Kuwait so we need to work via email until I am home on leave.Thanks,Mike

25

I own a 50'X 50' steel "quonset hut" type hangar. Front opening is 40'X 12' and presently has bi-fold doors which open horizontally (single-track at top of doors). I'm interested in a quote on a set of your bi-fold doors with straps. I need to know how much reinforcement would need to be added to the building and whether the reinforcing structure would be inside or outside of the building. We recently insulated the entire building and don't want to rip out the insulation to install new doors.

26

have existing quonset building 50x120' end wall door is 24x14'6''H but need a 16'4''tall opening, width is ok willneed a free standing frame as building has not much ofheader.  total height of building is approx. 18' but did not measure that yet. will you need this?

27

Phone will not be answered till I return from deployment. I have Quanset hut 60 feet wide I woud like to put a bi-fold

28

We have a Quonset Hut with 40' X 12" square openings on both ends. We are looking putting doors at both ends.

29

I have a American Steel Span Quonset type building the current door opening is 20ft wide by roughly 14 ft tall and would like prices on both the bi-fold and the hydraulic doors. this is a farm shop that gets a lot of use all year round. Thank you very much. Zach T.

30

We were intested in a Round Roof Bi-Fold Insulated Door. The door opening is 20' and the height is 14'. How much are the installation fee and the cost of the system? Thanks

31

finally got my hangar up..a quonsett hut 50 ft squre 19 feet high...the door opening is 39feet 9 inches by 10 feet high....bi-fold or hydraulic ?...which is better for this type of round steel building ? thanks...jim s.

32

need a door for a wood frame quonset

33

I need to add a door to my quonset style hanger at the McHenry Maryland Airport. The opening height is about 12'3" and the about width 40'2". There are no proximity issues. The interior is gravel and joins the taxi way blacktop pavement. I have AC power into the hanger. Can you do the installation? If so, please quote. TIA GC

34

I have a wood round roof quanset style building with an opening 14' wide by 13' high. I want to replace the existing sliding barn doors

35

I have a round roof steel building that i want to turn into an airplane hanger. the end wall is 45 feet wide and it is 19 foot 7 inches tall. the plane need 38x10feet for clearance, but i wold like to go to 12 feet if possiable. what am i looking at for a price?

36

finally building my quonsett style hangar...39 feet 9 inch wide x 10 feet opening...thinking about hydraulic one piece with walk through door...what kind of support do i need...jim

37

60 X 80 Hangar Quote round roof pitch roof with 2 doors one on each end. 50 x 14

38

I'm in need of an insolated shop door to put in my Quanset building i plan to make into a heated shop. It will also need a walk-in door in it. Its size is 20Ft. wide by 14 Ft. high Please give me a price along with instalation costs. I live 200 miles west of Fargo ND. Thank you Dave F.

39

I have and old 40'x72' old quanset shed with half the shed made into a heated shop. There are two old 8' sliding doors existing but no walk in door . Your bifold with a walkin would be perfect if would work and was in my price range. The doorway is apox. 16 wide and 12 high. Can this be done. Another problem is my location,Regina Saskatchewan. Is there a business anywhere close which you supply to, if not how could we do it.

40

Old round roof steel quonset needs door. Quote bifold with electric power operator also. This door needs to be insulated. I like the strap concept on the bottom drive of bi-fold Salesperson can call to discuss suitability of project Canadian supplier unable to supply before January WE NEED NOW!

41

I have plans to put up a 60' x 100' Quonset building for large square bales of hay and also, for machinery. I am planning to have 16' x 24' door openings, one on each end of the building. I am hoping the 16' height will accomodate the combine with the grain extension. By installing a Bi-Fold door, is it required for the door opening to be higher than the 16'? By reading the material, it doesn't appear so. Also, what would be the cost of the two Bi-Fold doors with remote. Any other information or advice will be appreciated. I plan to put up this building between now and December. Thank You, Martha

42

I have a 40' x 80' straight walled Behlen quonset. I would like to have a door put in on one end that is as wide as possible and as high as possible. (Around 30' by 16' is a guess???) I am located 9 miles from Grand Island, NE and wondered if you would have anyone available to look my situation over if they are attending Husker Harvest Days. I look forward to hearing back from you. Glenn S.

43

door to fit on end of 45'x70' quonset bldg. app.17' rise to top, door needs to be app.40'x12', with remote option, walk in door on it.

44

Existing blgd is quonset hut Q50 x 17 by SteelMaster with open ends. I want to add a 10' x 40' aircraft door to one end.

45

I have one of your BiFOLD doors in a 90 year old farm barn which I am well pleased with and now I am needing a replacement door in a 40 x100 foot Quonset building which I now have a 20 wide by 14 ft high over head in the end of the Quonset building. I would like to instal a 28 x 14 ft door is that possible in this Quonset building?

46

I'm going to build a barn this summer, I'm thinking of going with a quonset. Could you give me the most inexpensive quote you can (I'm on a budget). Also I might be interested in the self supporting frame, and the strap door, I might also go with a wider door - up to 30 foot. Could you give me some prices so I could compair them.

47

Need information on the bifold doors and will need a quote later on a 40' x 12 opening quanset building at airport to put one into. But need to get info first Also let me know what I need to look at when looking at this building and how it would work? Gary W. B.

48

I have a 40 x70 building with round roof rafters. They were made in olivia many years ago. I have a 12high x 14 wide overhead door on there now that is about 12 years old. I would like to make the opening larger to 15' x 22' wide. I would like to keep as much head room as possible. Thanks, Paul A.

49

Greetings, I am soliciting quotes for a 40' wide x 12' high door to be used on a Quonset type hangar we are purchasing from U.S. Buildings Direct. The hangar measurements are as follows: 50'x50', with 8' side walls, 20' high at the center of the arch. The hangar will be erected in Sudan within the next two months, so we will want to ship the door along with the hangar via surface in a 20' sea container. We need a door that will operate without electrical power, maybe using a chain fall type of lifting device. I will be erecting the hangar and installing the door myself with whatever local talent I can find. We are looking for something as cost effective as possible, aesthetics are not important. The hangar will be shipping from Port Newark, so please include a FOB price from Newark, NJ. Please advise if you are able to accommodate us. Thank you. George R.

50

Retrofitting Your Round Roof Building - Side Wall I have a 40x80x14.5H round steel building and I am interested in the above mentioned door. I am curious as to how the building is cut and supported along the top and sides where the building is cut and what kind of roofing and trusses are used. Please give me more details. Thank you, Larry.

51

I have a quonset with a 16ft high x 22 ft wide door. Will your doors fit? Can you install them?

52

I am interested in a bi-fold door for my quonset style building, which is approx. 14' high by 20'wide, with a high free standing header. Thanks, Craig

53

i would also like a quote on a 30x16 bifold for the other end of building, and also a bifold door for an existing 51' behlen steel quonset 24x14 and i may need a header as well so price that as well thank-you

54

Can not looses any head room in the 40 x 48 foot Butler quanset.

55

SteelMaster S Series Steel Arch (Quonset type) 50 X 50 hangar about 2/3 complete. Would like a price estimate and availability date for a bifold with straps. Door opening dimension is 41 X 12.

56

THE OPENING IS 7'1" BY 4'5". IT IS A METAL QUANSIT HUT WITH WOOD ENDS.

57

hi we are looking to replace our quonset doors. the dimensions of the inside frame if 13' high X 2' wide. can you quote us a price? the lowest price possible.

58

I had sent an E-mail to you but realized that I didn't send you any of my contact information except for the E-mail address. Like I said in that E-mail, we are considering buying a school with a Quonset building attached. Because of the way that it sits on the lot it isn't much use to us but if we could add a door on the rounded side instead of at the end for a reasonable price then we will purchase this building. I can't recall the exact size of the building but want to say that it is approximately 50 x 70.

59

Do you have some of the names of round roof building mfg. that you have worked with?

60

I HAVE A QUONSET WITH 2 SLIDER ON EACH END THAT MEASURE APPROXAMATELY 27X14. WHAT WOULD SOMETHING LIKE THAT COST IN A HYDRAULIC DOOR 1 PIECE OR BI=FOLD MARC H.

61

I am interested in some of the features on your bi-fold doors. I am looking at putting a new door on our quonset. The building in pretty long so we figure a good door would probably help keep it sealed. I am more interested in certain features. We have the resources to build most of the door itself. The components are what I am looking at. Motor, straps, frame around door, accesibility, cost of project etc... Thanks Jordan

62

I have a galvanized metal "Quonset" building with a opening of 281" wide and 192" tall. Give me a price on door to fit in there. I want a lockable walk-in door and some windows in the door and at least 2 remote controls and a touch keypad to open it from the outside. The easiest way is to e-mail me if you have any questions. Thank you,SD

63

I would like to recieve a quote on a 60x20' door to be used as an aircraft hanger. I would like it to include the cost of the free standing door-frame, as well as header requirements, dimensions, and loads against the buidling, if that is possible. The building that we are planning on mounting it in is basically a fabric membrane over a steel frame shaped like a quonset hut. If you have had any expereince with this type of installation any suggestions or pictures you have would be greatly appreciated. Thank you, Brian

64

I have a 40 (depth) by 50 (wide) Cover-it Quonset style hangar and want to put a dorr on it. Willing to contruct piers or bracket to tie into the steel tube structure but want a solution pre-fab if possible. What do you suggest?

65

40' wide 10' clear quanset hut (round) possible? Price?

66

Please call me @ listed #'s. I need A 36'w x 10'h for a customer w/ an arch style building. Please contact me ASAP.