35: AG BUILDINGS

1

We have a project in North Dakota. We need a qoute for a door that we are bidding on. The door needed is for Agriculture/ Aircraft use and is to be a Bi-Fold/ insulated door. The size of the opening is 50' wide by 18' tall. If you will, please email to me the door that you can provide with installation. In addition, we also will need the spec's for engineering purpose's,Color to be determined. Questions; Call me; Thank You, we hope you will be able to help us on providing the door & Installation.

2

I need two quotes: One for a Bifold Ag door 16'x22'and the other for the same dimensions but for Hydraulic Ag One-Piece door. I live in Washington state. How much for door delivery? Do you install? If so, how much does it cost? This is for a pole building. Is it possible to get this quote by Monday? Thanks.

3

I have an existing pole barn that has slider doors I want to insulate the barn and replace the door on end wall but I need all the head room I have so I cant put a conventional door on but I fiquired a Hanger Door price wood be out of my price range so I thought I would contact you to find out

4

I am looking for quote for 50'x16'-6" Hydraulic door to be installed in an agricultural building to be located on farm property near Coolidge, Arizona. I will need electrical data as well as loading and framing requirements in order to get acurate metal building quote and electrical cost for the project. If you can reply with your email address I can send preliminary building sketches as well.

5

We would like to get a quote for a 29' wide by 20' high bi-fold or hydraulic door. The demenions are rough opening. The use is Ag. The job location is Corvallis, Oregon. We have limited 240 power for the door unit.

6

would like a quote on 2 one piece hydraulic doors 20'wide by 14' tall for 50x100 farm equipment shed

7

I have a potato farmer in Idaho who wishes to install a 24' x 16' hydraulic door in an existing spud cellar. We can do the building modifications, but how do I go about getting a price on a hydraulic door?

8

I'm looking to purchase a bi-fold door for my barn the opening is 32ft wide by 17ft high. I dont need it to be automatic, just simple and inexpensive. email me a brochure and the prices for the product. Thanks, Dave

9

Door is for an Agriculture Building

10

WE BUILD TRUSSES FOR AGRICULTURAL BUILDINGS... OFTEN WITH 8'-0"-0 ON CENTER SPACING OF TRUSSES. CAN YOUR DOOR BE ATTACHED TO THE FACE OF THE BOTTOM CHORD OF A TRUSS ?? HOW DO WE KNOW WHAT LOADING TO APPLY ??? I WAS HOPING YOU COULD E-MAIL ME A FEW DRAWINGS... WITH A 40'-0"-0 DOOR 16'-0"-0 TALL. COULD YOU SHIP ANOTHER FREE CATALOGUE THANKS, BART

11

we are building a ag shop 40 x 56 with a big end wall door we need 14 foot head room the building has 16 foot side walls looking to put a 24 or 26 foot wde door with 14 foot head room. like to have an opener with it

12

Doors would be for an agricultural building. One door would be 16x14 and the other 16x12. The building is wood frame/steel outside. Construction starts in 2 weeks and was considering normal overhead "garage" doors. Have experience with bi-fold hangar doors and am looking for a price comparison. Would like straps rather than cables. Thank you.

13

I'm looking for price for 24' wide 15' tall door. Building will be solid core SIP type construction from EPS Buildings. This is Ag building. Door needs to be insulated. Any suggestions would be welcome.

14

WE (my partner & I)have been working on a project for a large beef farmer to build (12) feeder buildings that will be 192'ftx18'ftx620'ft. The center drive-thru is 30ft wide. I would appreciate a sales person to contact me for prices and availability on these doors. Thank you, Max Pulley

15

I am converting My old wooden barn into machinery storage. Barn is 32ft. wide , thinking of a 20ft. wide door and probly 14ft. high. No openings are cut in yet.I would like to know what I am doing for a door before I sign a contract to have the barn covered with steel siding. Do not contact Me by e-mail as I never check for those

16

Hello - Would you mind to send the catalog of farm door to me by mail soon. I am looking Bifold or one door open, which size is 9 by 12 I think. Please send me a catalog so I can look at it and decide to order it. Thanks, Richard

17

This is going on one of our hoop buildings and have had a similar door estimated by local company. We are looking for the basic door as it would be primarily used as grain storage.

18

Have an olivia rafter round roof building with shingles and steel siding. It is 40'x70' with an existing 12'x 14' overhead door with opener. Want to get combine in so would want at least 15'x24'? door opening. What door would work best? Would want the door insulated and may do cement repair on the existing floor. Door width has to be wide enough for an 8 row corn head.

19

I sell Metallic Buildings. I have a Prospect in Centralia,IL. wanting a farm building with a 50' X 18' BiFold Door. I can supply the wall panels, and the 4" insullation. I need a price on your door, shipped to Centralia, IL. with and without installation. Please line item the freight. Call me if you have any questions at the above phone. Kindest regards, Virgil S.

20

I am quoting an Ag shop to be constructed at Evansville, Wi. and my customer is looking at a 24'wide x 15'bi-fold door as an option to an overhead door. Could you quote me an installed price for this door? Thanks, Gary

21

I plan a farm building 32 X 60, with a 30 wide door which has a 10 foot clear opening, located on the gable end of this building. Vertical steel siding and roof will cover the building. Q1 - Is a 32' wide building wide enough to accomodate a 30' wide door? Q2 - This will be a pole building with trusses forming the roof. Do you build the truss or provide specs to truss companies? Q3 - Please provide an approximate price for such a door with lift straps and a bottom mounted operating motor, including freight to Princess Anne, MD.

22

I have a storage business in Northern Wi. with a 40x80 ag building with standard 16' sidewalls and would like to put a bi-fold or single door on the front. I would like to get a price for the largest door I can fit on the 40' end. If you have any questions, please call me. Thanks, Larry

23

I hope to build a hangar on my farm this summer and would like to put a hydraulic door on it. I think it will be 40'x 12'. Can you give me a ballpark price delivered? Thanks, Bill

24

i am putting this door on the end of a hip or round roof barn

25

hello We have an agricultural building that has a doorway with size dimensions of 16' high by 22 1/2' wide and i would like an estimate of what the cost would be. Also, included in the estimate i would like to know how much the shipping charge would be. thank you for your time and have a great day!

26

I'm in the process of budgeting the construction of a new fertilizer storage building to be located in SE Minnesota. It would start in the spring of 2009. On the project would be two bi-fold doors with a clear opening size of, 16' wide by 16' high. Can you provide me with a price for these doors? The skin on the doors would be corrugated fiberglass panels. I'm not sure if that is enough for you to price them. If not please email with any questions you may still have. Your prompt reply would be appreciated. Willy D.

27

Interested in pricing a 80' bifold or hydraulic door for a steel building mounted on gable end of building. Building will be used for assembly large ag equipment in ND.

28

I want to convert a 36'x60' dairy barn which has a quonset top set on block barn walls removing the haybarn floor between them. Haybarn door opening is 16'x 10'4" on top of lower level ba door 7'x9', converting both to one large door 28'x18'6". I need someone to come look at this project and tell me if it will work or not.Can we do this this year? How much will it cost? How soon can someone come?

29

60'x 100' post frame construction ag machinery storage building. Looking to place a bi-fold door at each end. Would like a quote for the two bi-fold doors.

30

Please send literature on your 14' X 20' agricultural door that will open to a maximum of 13'. Thanks

31

Need a quote and opening information for a 30x14 door to go into a steel ag building.

32

I would like to have information on your ag building bifold doors. will need specs & quote for 35 by 14 door and operator.

33

looking for ag bi-fold door for steel building end wall putting a used steel bldg back up in aprox. three weekswould like to talk to someone about doors first # is don second is matt thank you Don B.

34

Please send a quote on a 20' W x 12' H door for ag machine shed and a 25' W x 16 H ag shop. Thank you.

35

I saw your ad, and have a barn that i am considering replacing the door on. This is not a door that is used often, so price will be a factor. The door is 14'x14'. We have sliding barn doors there now, and they are in need of replacement/repair. Let me know what your cost is.

36

I plan to build a 70 x 120 ag. building in 2009.

37

I was impressed by one of your doors (new installation at craig w's) I recently bought an old farmstead with several old sliding doors and am looking at the options and would like to get an idea $wise how your doors compare to overhead doors. drill rigs require about 13' high opening. one door about 25' and a couple 16' wide Thanks Jet

38

IM interesred in a hydraulic door mounted on sidewall of a 18 ft tall barn can I get a 30ft wide by 16ft tall in this opening to work. I would also like to line inside and out with metal and to insulate. please call me on cell phone best way get hold of me. thanks John.

39

I would like to have a quote on two (2) 36'0" wide x 16'0" high doors, one (1) 20'0" wide x 16'0" high door. This is for an agricutural building, pre-engineered metal building construction. 36'0" doors are in end wall of building, 20'0" door in side wall, building is 18'0" eave height and is 1/12 roof pitch.

40

Need to retrofit a door on free stall dairy barn. Opening is 16ft. w x 10ft 1o inches high. need prices on bifold or a hydralic one peice door .

41

We are looking at long term plans for building renovation in our Ag Mech Shop. Currently, we have a roll-up door with windows above it. I would like to remove the windows and put in one large door. I would like price quotes for a 15 x 14.5 door and a 12 x 14.5 door (this would be the door size if the windows remained in place). Thank your for your assistance.

42

Could you send me more information regarding doors 6' wide and 10' high. These are for an aluminum farm shed. There are five doors. Please include price ranges as well Thank you, Roland L. F.

43

This is an existing barn /shop combo. 48' x 48'. Not sure of the door size at this time.

44

NEED TO HAVE A CLEAR OPENING OF 50'X16' FOR A 15'6" COMBINE

45

KQLX radio (8.90am) is the most listened to ag network in the Red River Valley of ND, MN and SD. IF Schweiss doors are interested in reaching our listening audience please contact me and I'll forward our coverage area info and rates. KQLX radio is a most affordable way to reach a good percentage of the ag professionals in our area. Many of these business owners have deferred income and buying decisions until after January 1st, so now's the time to let them know about your Schweiss door products. All my best, Charmin H.

46

Constructing 40 ft wide 60 ft long 12 ft high farm building. Wood frame with wood truss construction. Need budget pricing on bi-fold door 38'W x 10'H Thanks Jim

47

I have an existing barn that I am converting to a hanger on my property.

48

We are looking to replace the doors on an exsisting building. A dry fertilizer storage bulk building. The front of the building is open and has wood pillars dividing the front into 6 sections. The doors we are thinking about could be one large or two smaller ones.

49

I need price on 20 wide 18 High Bifold for Agri door to be installed on/in Butler PEMB

50

I am curious to know what a bi-fold, or hydrualic door might cost me for a hay storage barn. The dimensions are 14 feet tall and 40 feet wide. One color, red. With an outside controller, and possibly with a remote. No walk through doors needed. I also need a door 14 feet tall and 12 feet wide, with same color of red, outside controller, and no walk through doors. Can you please send me prices on those dimensions, or a price list of common sizes? Thanks, Ty

51

i have a steel miracle span building. the door opening is 24'w x 14'h. i need to raise the height a foot to get combine in the shed. looking for a quote and time frame. i just put a hopper topper on combine, now it doesn't fit in the shed...

52

Looking for a small fold up bi-fold door: 6ft. by 6ft that would fold up into a small shed. I am building this to store items like by zero-turn lawn mower and wood splitter and don't have much space. I would like this door to either fold up or fold to one side outwards or fold in two halves but would need to fold inward. The building is an attachment to my compact Kabota tractor barn that I built and is of an odd shape due to the trees that I don't want to cut down. I also could have a door that would slide to one side and open. This might be the easties way. I would need a track for this for both the framing I will build and for the door. What opitions do I have?

53

my barn is built and i need doors

54

I have an airport hanger on the farm. the opening at this point in aprox 56 ft. with 20 ft of overhead clearence. since i do not need any more than 35 ft of opening i am trying to figure the cost of doors based on width and my cost of enclosing the extra. could you e-mail me an estimate for diferent width doors with the strap and bottom control

55

I would like to request a full catalog about the Agricultural Buildings all types. High ceilings, can handle strong winds and heavy humid, hot weather, heavy rain. Hope to receive the catalogs soon and thank you. BEST WISHES, Maynard s.

56

a kenyan company that deals with agricultural farming and processing. We are looking for upward folding doors for our new rice mill with the following dimensions:12ftx14ftx14ft. please send us your qoutations and details of your products. Thanks. Jack O.

57

Looking for two bifold doors for ag buildings. One would be 10x10 and the other would be 12x12 Insulated is preferred Need ASAP Thanks

58

Need a price on a 16 ft. tall by 20 ft. wide ag shed door.