SCHWEISS HYDRAULICS are designed for large moving hydraulic doors.
The Schweiss Red Power manifold has a clean, crisp design. It features a
polished finish, no exposed plumbing lines and a filter drain port that allows
oil to drop back into the tank preventing messy oil puddles. Includes a filter
clogging indicator showing when to change your filter element. 3000 PSI
pressure gauge is standard and gives you the reading of the pump pressure
used to open the door.
Auxiliary screw-on oil filter is easy to change. Best quality filter that protects the hydraulic pump from impurities. Oil filter / breather cap / filler port has a rich looking polished finish. Clean looking! The easy screw-on cap has a built in screen to keep debris out; important when adding oil. Sight glass displays the oil level and temperature in the oil reservoir tank. Red Power hydraulic oil reservoir has a heavy-duty, long-lasting powder-coated tank with a drain plug.
Schweiss Doors has set new and higher standards in hydraulic pump development and safety features.
The Red Power pump/motor system from Schweiss Doors offers superior electrical components that stand leagues above others. Why? Our Red Power motors come equipped with a stand alone electrical control box. The unique design of Red Power motor system is designed with safe UL listed components. Plus, it's composed of common components, standard in the electrical industry throughout the world. These electrical control boxes are also designed with ample space to safely house all required electrical components, such as contractors, transformers, relays, motor timers, rectifiers, and control fusses. Motor assemblies must be wired to National Electrical Code (NEC) standards.
Schweiss Doors uses top-quality heavy-duty, brand name LEESON motors, totally enclosed, fan cooled, with a common 56C face mount standard shaft size, powering a single peer-driven pump. Plus, these quality continuous-duty motors are safety-backed with fuses and overload protection.
Hydraulic doors are large in size and just like an airplane wing, the door frame flex during operation. The hydraulic cylinders on each side of the doorway are connected to the door frame and the building using spherical bearings. The spherical bearings accommodate the flexibility of the door frame while at the same time allowing the cylinders to raise and lower the door without binding on the hydraulic cylinder pins and brackets. Spherical Bearings on both ends of the cylinder allow the cylinders to stay straight through the full range of motion.
Schweiss Uses all Steel Members
Strong welded Connections...
Internal Truss on this door
External Truss is available.
Small Tec Screws used to hold the
wood on, how strong is that?
Less structural strength to the door
frame when using wood over steel.
Stacking wood on top of each other
adds unnecessary weight to the door.
Did you buy an all steel door? Did you expect to get wood on your steel door? Substituting Wood in place of steel doesn't add
structural value to the door frame. It makes for a poor connection and weaker door frame assembly. Wood may shrink over time
and may split!... Tec screws used to fasten wood to the door frame may wiggle loose over time weakening the connection.
Under Workbench - Hydraulic power unit can be placed under a workbench or anywhere in the room
Wall Mount Up or Down - mount anywhere away from the door opening or even in another room.
Stand Alone Unit - Complete stand-alone hydraulic unit can be placed anywhere in the building.
Up/Down/Stop Switch - Mounted near the door opening.
Electrical Control Panel - Can be mounted independently from the hydraulic pump
Schweiss hydraulic doors are custom made to fit any size opening for your
building. Each door is built to fit your clear opening without using up existing
headroom. There is no such thing as an odd size door or a job too small.
You dream it, and we make your dreams come true.
Schweiss Doors is proud of our new hydraulic doors that swing outward. Already a leader in the bifold door industry, Schweiss Doors
also now offers a better hydraulic door. The door design requires zero headroom, comes pre-hung, is water-tight, easy to install, easy
to operate with the push of a button, easy to insulate and swings out to provide a canopy when the door is in the open position.
Powered by a powerful hydraulic pump, two heavy duty cylinders activate the hydraulic door frame. Hinges across the top of the door
frame allow the door frame to swing out and away from the building to the full open position. The hydraulic pump can be located away
from the door opening to keep a clean look.
12 volt DC motor used to raise and lower the door.
Cordless Drill operation feature.
Auxiliary Pump operates the backup system.
Handheld up/down control pendant - with 10 ft cord.
12 volt battery powers the DC backup motor.
Tractor Backup Fittings - Standard on Schweiss Doors.
You can raise and lower the door with a
handheld drill. If you arrive at your door and
the battery is dead, now you have the option
to use a cordless drill to open or close the door!
Electric Photo Eye
Door Base Safety Edge
Warning Lights and Horns
Top Override Jiggle Switches
Remote Control Operated Doors
Multiple Emergency Back-up Systems
Learn more about our Hydraulic Upgrade System
The doors automatically stop when you take your finger off the
Allows you to disable the door, for service, maintenance, and
emergency backup operations.
Flush Mount... (H Style) Requires 5" Headroom. Each door comes pre-hung with sub-frame.
Outside Mount... (M Style) Lose No Headroom. Each door comes pre-hung with sub-frame.
Every Schweiss door is properly prepared for painting. The door frame members and parts are finished with gray primer. We offer matching tough-up
paint to take care of any slight nicks or scratches.
Schweiss is ready to shift gears at any point. this is the key to our success. Whether it be marketing, designing or creating new products. With this
attitude and flexibility we have introduced new Aluminum galvanized doors. Call for special pricing.